GENiEGRiPS 100mm Wide Cushions Operating instructions

Brand
GENiEGRiPS
Model
100mm Wide Cushions
Type
Operating instructions
Home » GENiEGRiPS » GENiEGRiPS 100mm Wide Cushions Instructions
GENiEGRiPS 100mm Wide Cushions Instructions
GENiEGRiPS 100mm Wide Cushions Instructions
Manuals+ — User Manuals Simplified.
Contents
1 Assembly Instruction
2 Support
3 Documents /
Resources
3.1 References
4 Related Posts
Assembly Instruction
STEP 1:
Locate Magnets
Ensure Cushions are correct way up, with magnets facing forktyne shaft.
STEP 2:
Position Cushion
Position the Cushions over the forktyne so it meets the top of shaft.
STEP 3:
Push Firmly
Push Cushions firmly against the forktyne shaft to ensure strong contact is made with magnets.
STEP 4:
To Remove
Reverse steps 1-3 to remove Genie Grips® Cushions.
STEP 5:
Storage
Store Cushions away neatly on forklift to ensure Genie Grips® are easily accessible at all times.
ALWAYS:
Ensure forklift truck is only operated by licensed/trained personnel and in accordance with manufacturer’s safe
operating procedures.
HELPFUL HINT:
“Ensure Genie Grips® Cushions magnets are kept clean and free of contamination (eg grease, oil, paint, etc)”
Support
GENiEGRiPS.COM
Documents / Resources
GENiEGRiPS 100mm Wide Cushions [pdf] Instructions
100mm Wide Cushions, Wide Cushions, 100mm Cushions, Cushions
References
Forklift Attachments and Safety Products Australia | Genie Grips
Manuals+,
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

GENiEGRiPS 100mm Wide Cushions Operating instructions

Brand
GENiEGRiPS
Model
100mm Wide Cushions
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents