Amazon Basics AB-BR817-PC User manual

Type
User manual

This manual is also suitable for

B0775YFBQC, B07763QX6P, B077626HSC, B088XSBTQR
Modern Robe Hook
Crochet Pour Vêtements, Style Moderne
Moderner Bademantelhaken
Appendi Accappatoio Moderno
Colgador Moderno Para Albornoz
Moderne Kapstokhaak
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1 2 3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Position the mounting bracket in the desired mounting location and
mark 2 vertical holes using a pencil.
Step 1: Determine where you would like to mount your bathroom hardware
fixture by placing it on thewall. Mark your location with tape or a pencil.
Step 2: Using a drill and 1/4"(6.35 mm) drill bit, drill two vertical holes in the
location previously marked using the mounting bracket.
Step 3: Insert plastic drywall anchors into both drilled holes. Lightly tap with hammer
until anchors are flush with wall.
Step 4: Position mounting bracket against anchor holes and thread screws until secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: With the fixture resting on the wall, use 1/8" (3.3 mm) slotted screwdriver again
to tighten the fixture onto the mounting bracket.
Maximum load: 11 lbs (5 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
76
Step 7: Make sure the fixture is secured to the wall by gently moving from side to side.
B07767WNWT, B0775XKM8R, B07768GNS4, B088XVQDH7
Modern Towel Ring
Anneau Porte-serviettes, Style Moderne
Moderner Handtuchring
Porta Asciugamani ad Anello Moderno
Toallero De Anillo Moderno
Moderne Handdoekring
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1 2 3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Position the mounting bracket in the desired mounting location and mark 2
vertical holes using a pencil.
Step 1: Determine where you would like to mount. your bathroom hardware fixture
by placing it on the wall. Mark your location with tape or a pencil.
Step 2: Using a drill and 1/4"(6.35 mm) drill bit, drill two vertical holes in the
location previously marked using the mounting bracket.
Step 3: Insert plastic drywall anchors into both drilled holes. Lightly tap with hammer
until anchors are flush with wall.
Step 4: Position mounting bracket against anchor holes and thread screws until secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: With the fixture resting on the wall, use 1/8" (3.3 mm) slotted screwdriver again
to tighten the fixture onto the mounting bracket.
Maximum load: 11 lbs (5 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
76
Step 7: Make sure the fixture is secured to the wall by gently moving from side to side.
B0775YFK36, B07763W5NX, B07762Z897, B088XXNCMB
Modern Standard Toilet Paper Holder
Porte-papier Toilette Standard, Style Moderne
Moderner Standard-Toilettenpapierhalter
Portarotolo Standard Moderno
Portarrollos Moderno Para Papel Higiénico Estándar
Moderne Standaard WC-Papierhouder
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1 2 3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Tape your mounting template to the wall covering your desired location.
Ensure that the template is straight by aligning a level with the center
line of the template.
Step 1: Determine where you would like to mount your bathroom hardware fixture
by placing it on the wall. Mark your location with tape or a pencil. Make
sure that both ends of the fixture are secured to the towel bar.
Step 2: Using a drill and 1/4" (6.35 mm) drill bit, drill two vertical holes for each
mounting bracket in the location specified on the template paper.
Step 3: Remove mounting template from the wall and insert plastic drywall
anchors into all 4 drilled holes. Lightly tap with hammer until flush with wall.
Step 4: Position the mounting brackets against anchor holes and thread screws
until secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: Place fully-assembled fixture overtop the mounting bracket with set screws
facing down. With the fixture resting on the wall, use 1/8" (3.3 mm) slotted
screwdriver again to tighten the fixture onto the mounting bracket.
Maximum load: 11 lbs (5 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
76
Step 7: Make sure the fixture is secured to the wall by gently moving both posts
from side to side.
B0775ZMBDX, B07763QC7R, B0775Z9ZDK, B088XWV8ZF
Modern Towel Bar - 18-Inch
Barre Porte-serviettes, Style Moderne - 45,7 cm
Moderner Handtuchhalter – 45,7 cm
Porta Asciugamani a Barra Moderno - 45,7 cm
Toallero De Barra Moderno - 45,7cm
Moderne Handdoekstang - 18Inch
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1 2 3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Step 2: Using a drill and 1/4" (6.35 mm) drill bit, drill two vertical holes for each
mounting bracket in the location specified on the template paper.
Step 1: Determine where you would like to mount your bathroom hardware fixture
by placing it on the wall. Mark your location with tape or a pencil. Make
sure that both ends of the fixture are secured to the towel bar.
Tape your mounting template to the wall covering your desired location.
Ensure that the template is straight by aligning a level with the center
line of the template.
Step 3: Remove mounting template from the wall and insert plastic drywall anchors
into all 4 drilled holes. Lightly tap with hammer until flush with wall.
Step 4: Position the mounting brackets against anchor holes and thread screws until
secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: Place fully-assembled fixture overtop the mounting bracket with set screws
facing down. With the fixture resting on the wall, use 1/8" (3.3 mm) slotted
screwdriver again to tighten the fixture onto the mounting bracket.
Step 7: Make sure the fixture is secured to the wall by gently moving both posts from
side to side.
Maximum load: 22 lbs (10 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
76
B07763RB3V, B07762NXPM, B0775YP7GZ, B088XQMZSH
Modern Towel Bar - 24-Inch
Barre Porte-serviettes, Style Moderne - 61 cm
Moderner Handtuchhalter – 61 cm
Porta Asciugamani a Barra Moderno - 61 cm
Toallero De Barra Moderno - 61 cm
Moderne Handdoekstang - 24 Inch
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1 2 3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Step 2: Using a drill and 1/4" (6.35 mm) drill bit, drill two vertical holes for each
mounting bracket in the location specified on the template paper.
Step 1: Determine where you would like to mount your bathroom hardware fixture
by placing it on the wall. Mark your location with tape or a pencil. Make
sure that both ends of the fixture are secured to the towel bar.
Tape your mounting template to the wall covering your desired location.
Ensure that the template is straight by aligning a level with the center line
of the template.
Step 3: Remove mounting template from the wall and insert plastic drywall anchors
into all 4 drilled holes. Lightly tap with hammer until flush with wall.
Step 4: Position the mounting brackets against anchor holes and thread screws until
secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: Place fully-assembled fixture overtop the mounting bracket with set screws
facing down. With the fixture resting on the wall, use 1/8" (3.3 mm) slotted
screwdriver again to tighten the fixture onto the mounting bracket.
Step 7: Make sure the fixture is secured to the wall by gently moving both posts from
side to side.
Maximum load: 22 lbs (10 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
76
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Amazon Basics AB-BR817-PC User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI