AmazonBasics AMBS05 User manual

Page is loading ...

4

EN

Safety and Compliance

Please read and understand this entire manual before using the product.

CAUTION

• Be aware of dynamic loading! Sudden load movement may brieﬂy

create excess load causing product failure.

• Evenly distribute the weight on each shelf, and keep the heaviest

loads on the bottom shelf.

• Use only on ﬂat, level and hard surface capable of supporting the

shelving and any items placed on it. Remember to only use the shelf

on level ground with evenly distributed weight.

• Do not store ﬂammable liquids in the unit unless they are secured in

an approved container.

• Keep bystanders out of the area during assembly.

• This product is not a toy. Do not allow children to play with, on or

near the unit.

WARNING

• Do not stand on, step on, or alter this unit for anything outside the

designed function of storage.

• Use care when handling and assembling metal parts.

• The metal may have sharp edges or corners. The use of protective

gloves is recommended.

• Always remember to use proper lifting techniques when moving the

boxed or assembled unit.

Preparation

Before beginning assembly of product, make sure all parts are present.

Compare parts with package contents list. If any part is missing or

damaged, do not attempt to assemble the product.

It is recommended that this product be assembled on a clean, soft

surface, such as a piece of cardboard. The assembling task can be

performed by one person but availability of a second person will make

the task simpler.

5

EN

Troubleshooting

Problem Possible cause Corrective action

Shelf is not

level.

• Beam(s) or brace(s)

used for the same

level are not at the

same height or

they are assembled

upsidedown.

• Re-assemble beam(s)

or brace(s).

• Rivets on the beam(s)

or brace(s) are not fully

seated into the post

slots.

• Fully seat the rivets.

• The ground is uneven

or too soft.

• Move the shelf to a ﬂat,

level and hard surface.

Speciﬁcations

Measurements

(W x D x H)

US Standard Metric

Shelving unit 48 x 18 x 72 in.

approx. 122 x 45.7 x

182.8 cm

Feedback and Help

Love it? Hate it? Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products

that live up to your high standards. We encourage you to write a review

sharing your experiences with the product.

US: amazon.com/review/review‑your‑purchases#

UK: amazon.co.uk/review/review‑your‑purchases#

US: amazon.com/gp/help/customer/contact‑us

UK: amazon.co.uk/gp/help/customer/contact‑us

Page is loading ...

21

NOTICE

Make sure all the rivets are fully seated into the post

slots. You may want to use a rubber mallet (not

included) to help push the rivets into the post slots.

This applies to all the rivets used in this unit.

REMARQUE

Assurez-vous que tous les rivets sont complètement

insérés dans les fentes du montant. Vous pouvez

utiliser un maillet en caoutchouc (non inclus) pour

mieux pousser les rivets dans les fentes du montant.

Cela s’applique à tous les rivets utilisés dans cet

équipement.

HINWEIS

Achten Sie darauf, dass alle Steckzungen vollständig

in den Schlitzen der Seitenleisten eingesetzt sind. Sie

können einen Gummihammer (nicht im Lieferumfang

enthalten) verwenden, um die Steckzungen in die

Schlitze der Seitenleisten zu drücken. Dies gilt für alle

indiesem Produkt verwendeten Steckzungen.

AVVISO

Assicurarsi che tutti i rivetti siano completamente

inseriti nelle fessure del montante. Per spingere

più agevolmente i rivetti all’interno delle fessure del

montante, potrebbe risultare utile un martello di gomma

(non incluso). Questo consiglio si applica a tutti i rivetti

usati in questa unità.

AVISO

Compruebe que todos los remaches están

correctamente ﬁjados en las ranuras de la barra.

Utiliceun martillo de goma (no incluido) para empujar

los remaches en las ranuras de la barra. Esto es válido

para todos los remaches utilizados en esta unidad.

OPMERKING

Zorg ervoor dat alle insteektongen volledig in de

sleuven van de staanders zijn gestoken. U kunt een

rubberen hamer (niet meegeleverd) gebruiken om

de insteektongen in de sleuven van de staanders te

drukken. Dit kan voor alle voor dit product gebruikte

insteektongen worden gedaan.

注意

全てのリベットが完全に柱のスロットに封じ込

められた状態であることと確認してください。

リベットを柱のスロットに押し込むためにゴム

ハンマー（含まれていません）を使うと便利で

す。これはこのユニットの全てのリベットに当

てはまります。

22

C

B

A

NOTICE

Each of the beams

A

and braces

B

on the same

level should be at the same height.

REMARQUE

Chaque poutre

A

et chaque renfort

B

du même

niveau doit se trouver à la même hauteur.

HINWEIS

Alle Streben

A

und Querstreben

B

derselben Ebene

sollten auf gleicher Höhe eingesetzt werden.

AVVISO

Ogni trave

A

e ogni pilastro

B

appartenenti allo

stesso livello devono essere posizionati alla stessa

altezza.

AVISO

Cada uno de los largueros

A

y travesaños

B

del

mismo nivel deben estar a la misma altura.

OPMERKING

Alle stijlen

A

en dragers

B

op hetzelfde niveau

moeten dezelfde hoogte hebben.

注意

同じレベルにあるそれぞれのビーム

A

およびブ

レース

B

は同じ高さである必要があります。

3

A (2 x)

B (1 x)

Page is loading ...

amazon.com/AmazonBasics

V08-11/19

MADE IN CHINA

FABRIQUÉ EN CHINE

HERGESTELLT IN CHINA

PRODOTTO IN CINA

HECHO EN CHINA

GEMAAKT IN CHINA

中国製

AmazonBasics AMBS05 User manual

AmazonBasics AMBS05 User manual

in other languages

Related papers

Other documents