Kmart 42207405 User manual

  • Hello! I'm a chat assistant that has analyzed the provided installation instructions for the Kmart's Extendable Curtain Rod Sets (90-160cm and 175-305cm models). The document details how to install the rods on different wall types (wood, brick, concrete) and also specifies maximum loading weights. I'm ready to answer your questions about these curtain rods.
  • What is the maximum loading weight for the curtain rod?
    What should I do before installing the curtain rod?
    How do I install the brackets on wooden walls?
    How do I install the brackets on brick or concrete walls?
1.Remove one finial from one end of the rod.
2.Check width of window and overhang required before commencing.
3.Expand the rod to the required length. Slide curtains tabs onto rod.
90-160cm/175-305cm Extendable Curtain Rod Set
Installation Instructions
Contents:
4. Install the finial on the end of rod.
5. Installing the brackets on the window.
6. Pull tabs to centre of rod and place rod in brackets. Use screws(F) to firmly fix
the rod to brackets.
c) Plasterboard - fixings for other types of walls are available from hardware stores.
a) Wooden frames or wooden walls-if you are installing the brackets into
wood,use screws(G)to fix bracket(E). Wall plugs(H)are not
needed for wood.
b) Brick or Concrete walls- Use Wall plugs(H). Use a power drill to pre-drill
holes on the wall. Then insert the wall plugs (H) into these holes. Fix
bracket (E) with Screws (G).
G
E
H
FF
Steel:pole dia 25/28mm Finial Bracket ScrewScrew Wall plug
90cm X1 X2
EF G H
X3
X2
X2
X2
X3
X4
X6
X4
X6
175cm
Size
90-160cm
175-305cm
DIA: 25mm / DIA: 28mm
DIA: 25mm / DIA: 28mm
85cm &
X1&
155cm
G
E
Warning: The maximum loading weight is 6.5 kg. Please pay attention to the curtain weight.
If using the third bracket, the maximum loading weight is 9 kg.
G
E
H
G
E
/