Husky 18791 Operating instructions

Hello! I've analyzed the user manual for the Husky Liners WeatherBeater 18791 Floor Liner. This document provides instructions on how to install and care for these custom-molded front floor liners. It highlights that the liners are made from a durable resin and are easy to clean, while also warning against the use of certain cleaning products. Feel free to ask any questions you have about the product.
Do I need to remove the factory floor mats?

Can I use Armor All to clean the liners?

What cleaners are recommended?

3 WEATHERBEATER™ PT #18791

FLOOR LINERS

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 1879 Weather Beater Front Floor Liner.docx

7_25_2023

CARE AND USE INSTRUCTIONS

Thank you for selecting an WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are

custom molded to fit your specific vehicle. The liners are made to take the place of your factory floor mats. For

correct fit, it is necessary to remove the factory floor mats before installing your new floor liner. However, do

not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR CUSTOM MOLDED

FRONT FLOOR LINERS

TO EASE INSTALLATION OF YOUR FRONT LINERS, MOVE BOTH FRONT SEATS TO THEIR MOST

REARWARD POSITION. NEXT, REMOVE ANY EXISTING FLOOR MATS AND INSTALL THE LINERS,

POSITIONED AS SHOWN ABOVE. ONCE THE LINERS ARE INSTALLED, MOVE THE FRONT SEATS TO

THEIR DESIRED LOCATIONS.

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE