Jabra Link 400a USB-A, DECT, MS, NA
How do I manually pair a headset with the Jabra Link 400?
To manually pair a headset with the Jabra Link 400, follow these steps.
1. Ensure the headset is turned off. To turn off the headset, press and
hold (4 seconds) the Call button.
2. Press and hold (4 seconds) the Call button until the LED flashes blue
and you hear a tone. The headset is now ready to pair.
3. Press and hold the button on the Jabra Link 400 DECT adapter until
the LED turns solid blue. It may take up to 20 seconds for the pairing to
complete.
