Haier HBF600T User manual

Brand: Haier

Model: HBF600T

Category: Washing machines

Type: User manual

This manual is also suitable for

HBF1055TVE

Haier HBF600T is a Front Load Washer with a 5 kg capacity and a spin speed of 500 rpm. It features 15 washing programs, including programs for cotton, synthetic, and wool fabrics. The HBF600T also has a number of optional function keys, such as a half load option, an eco option, and a spin exclusion option. With its variety of features, the HBF600T is a versatile and user-friendly washing machine that can meet the needs of most users.

Front Load Washer Model:HBF600T

MODEL：HBF600T

FRONT LOADING WASHING MACHINE

Service Manual

Suited model:

HBF500T

Features：

●Free selection for cold or hot washing

●Selecting washing temperature according

to the type of fabrics

●15 washing programs

● Spin speed 500rpm

● Capacity—5kg

● HBF Aesthetic design,elegant and beautiful

Haier Group

MANUAL CODE： No.20050508001

Front Load Washer Model:HM500T

Contents

1、Content------------------------------------------------------------------------------------------1

2、Product code illumination and series introduction------------------------------------2

3、Features ----------------------------------------------------------------------------------------3

4、Specification --------------------------------------------------------------------------------4-5

5、Safety caution ------------------------------------------------------------------------------6-7

6、Installation ----------------------------------------------------------------------------------8-9

7、Net dimention --------------------------------------------------------------------------------10

8、Names of the parts--------------------------------------------------------------------------11

9、Functions----------------------------------------------------------------------------------12-13

10、Function Schedule------------------------------------------------------------------------14

11、TroubleShooting-----------------------------------------------------------------------15-20

11、Wiring Circuit -------------------------------------------------------------------------------21

13、Exploded View-------------------------------------------------------------------------22-23

14、List of Parts ---------------------------------------------------------------------------24-27

Front Load Washer Model:HBF600T

Product code illumination and series introduction

model code rule description

Model identification：

HBF 600

A B C

A：Serial code

B：Max spin speed

C：Temprature adjustive

Examples：

HBF600T

It represents HBF series appearance，600rpm spin speed,temprature is also adjustive.Outer drum is

plastic material.

Front Load Washer Model:HBF600T

Features：

● Free selection for cold or hot washing

Selecting washing temperature according to the type of fabrics

● 16 washing programs,

● Three types of laundry: cotton, synthetic and wool

●

Spin speed 500rpm

● Changeable washing function: cold wash and hot wash,No soak

and economic wash

● Stainless steel drum; painted cabinet with three layers of

cataphresis, phosphorus and paint

Front Load Washer Model:HM500T

Specifications

Front loaders washing machines, push button opening door HBF600T(EC4885)

Last update 2002-5-13

Product identification

Description of appliance Washing machine

Type of appliance (FS = standing, BI = built-in)

Supplier own brand Haier

Supplier bar code EAN 6921081510438

Mares computer code

Commercial Brand / Model OEM

Commercial bar code EAN

Key-Features

Energy efficiency class

Washing performance class

Spin efficiency class

Programs

n° 15

Capacity

Spin speed (max. / optional)

rpm 600

Noise level dB(A) 68

Energy consumption per wash circle * kWh 1.14

Water consumption* l 59

Residual dampness (spin result) % 72%

Spin speed selector switch (steps) rpm -

Spin speed variator (stepless) rpm -

Adjustable thermostat (water temp. adjust from - to) °C 90 - T

Drum capacity dry laundry / water kg / l 5 / 42

Auto water level adjust (depending on volume of filled in laundry)

AWL

Washing time (max.) min 153

Washing temperatures (program-controlled) °C 40 / 60 / 90

Certification's (CE / ISO 9001 / ISO 9002) CE / ISO 9001

Approvals (VDE/GS / TÜV/GS / IMQ) TÜV/GS (Rhl.)

* EN 60456 (60°C cycle, full load without pre-wash) T= COLD

Basics data

Unit dimensions (H x W x D) cm 85 x 59,5 x 52

Net weight kg 72

Voltage/frequency V/Hz 220-230V~50Hz

Input power / main fuse (intensity) W / A 2250/10

Work top / removable l/l

Control M = electromechanical, E = electronic, F = fuzzy M

Drum S = stainless steel / Z = zinc coated S

Tub P = Polyprop./ S = stainless steel P

Door:

aesthetic (R = round, Y = big eye, Q = square) Q

Diameter cm 30

Outer door frame S= stainless steel / M = metal / P = plastic

Inner door G= glass / P= plastic G

Detergent compartments n° 4

Removable compartment for liquid detergent -

Delay timer (from - to) h -

Self cleaning suds pump l

Water inlet hose cold water / hot water l

Water drain hose / -support

l/l

Front Load Washer Model:HM500T

Adjustable feet n° 4

Safety systems

Auto door lock

ADL l

Motor overheating protection

MOP

No heating without water

NHW l

Auto water cool-down (before drain 90°C boiled water)

AWC l

Water return protection

WRP -

Acqua Stop kit

Child protection

Programs

1) Strong action /cotton cycles

n°

2) Normal action / synthetics

n°

3) Delicate action / wooll cycles

n°

Pre-wash / wash

l/l

Quick wash / super quick wash

Rinse / soften

l/l

Delicate / hand wash

l/-

Wool / cashmere

l/-

Soak / spin l/l

Drain

Optional function keys (additional program settings)

ON/OFF button

Half load

Eco

Spin exclusion

Spin reduction rpm

High water level

No Soak

Rinse stop

Delicate

Cold wash T

Packing dimensions & loadability

Packing dimensions (H x W x D) cm 88 x 66 x 60.8

Gross weight kg 69.0

40' Container load pcs

40' HC load capacity pcs 214

Built-in dimension

Requested measure of niche (H x W x D) cm

Dimensions of door cm

Logistic / recicling information

Packing weight kg 6

Packing materials / Recycling symbols REzY

Carton (weight) gr 4,500

Polistyren (weight) gr 1,000

Polyetylene foil (weight) gr 500

Other packing materials (weight) gr 0

Wood (weight) kg 0.00

Service RS REzY

User instruction (languages) D / F / I / GB / E / P / NL

Max. failure rate (12 Months after sales to end customer) %

Front Load Washer Model:HBF600T

Safety caution：

Front Load Washer Model:HBF600T

Installation

Front Load Washer Model:HBF600T

Net dimention

height: 850mm / width: 595mm / depth: 520mm

Front Load Washer Model:HBF600T

Names of the parts

Front Load Washer Model:HBF600T

Functions

Front Load Washer Model:HBF600T

Function Schedule

Front Load Washer Model:HBF600T

Troubleshooting

I .The appliance does not work.

Possible causes

1.The socket is not the required one or the connection is loose.

2.The door is not properly closed or the switch of micro delay is in poor contact.

3.The plug wire of motor is in poor contact or the motor is broken.

4.Malfunction of electronic module

Troubleshooting

1.Check the socket and plug to make sure that they are properly connected.

2.Check whether the micro delay switch is in good contact in on-position. If yes, insert the terminal firmly

to provide a good connection.

3.The electronic module controls the rotary speed and direction of the motor. In case of the failure, check

the wiring or replace the electronic module.

II .Filling failur

Possible causes

1.The switch of water supply is not opened or the water pressure is too low.

2.The door is not properly closed or the micro delay switch is in poor contact

3.The water electromagnetic valve is broken.

4.The plug wire of drainage pump is in poor contact.

5.The pressure switch is broken.

Troubleshooting

1.Repeat the following steps.

1).Open the switch of water supply

2).Check whether the filling hose is twisted or blocked.

3).Check whether the water eletromagnetic valve is blocked.

4).Check whether program is properly selected.

5).Check whether the water supply pressure is too low.

2.Check the door catch and the door lock are in good contact. If not, make necessary adjustment. Check

whether the micro delay switch is in good contact in on-position.

3.Check whether the electromagnetic is good in on-position. Fasten it if necessary.

4.Blow on the pressure switch and "click, click" can be heard. Otherwise, replace the pressure switch with

a new one.

III .No drainage

Possible causes

1.Improper installation

2.The drainage pump is broken.

Troubleshooting

Front Load Washer Model:HBF600T

1.Repeat the following steps.

1).Check whether the drainage pipe is twisted or blocked. The appropriate height

of the water drainage outlet should be from 80 to100cm.

2).Check whether the program is properly selected.

3).Connect the power cable to the drainage pump to check whether the operation is normal. If not, make

necessary replacement.

IV .Unusual noise

Possible causes

1.The packing screws should be disassembled.

2.The washer is placed too near a wall.

3.The washer is loaded over the standard capacity (6Kg).

4.There is foreign object other than fabrics in the washer.

5.The washer does not stand level.

6.Bolts or screws are loose.

7.The belt is loose.

8.Something is wrong with the triangle assembly.

Troubleshooting

1.Disassemble the packing screws.

2.Move the washer away from the wall.

3.Do not load the appliance more than the standard capacity.

4.Remove the foreign object.

5.Adjust the washer until it is level.

6.Tighten the bolts and screws.

1) .Fastening bolts of vibration damper

2) .Fastening bolts of balances

3) .Screws of water heating pipe

7.Increase the tension of belt.

8.Replace the triangle assembly.

V.The drum doesn't rotate; the spin speed is too high or too low.

Possible causes

1.The belt tension is too low or the fastening bolts are loose.

2.The plug wire of motor is loose or the motor is broken.

3.The capacitor is broken.

4.The electronic module is broken or is not properly plugged.

Troubleshooting

1.Adjust the tension of belt and tighten the screws.

2.Check whether the plug wire of motor is loose or whether the motor works normally. If not, make

necessary replacement.

3.Check whether the capacitor is good with a universal meter. If not, make necessary replacement.

4.Replace the electronic module with a new one.

Front Load Washer Model:HBF600T

VI .The water level is too high.

Possible causes

1.Gas leakage at pressure system of water supply.

2.The pressure switch is broken.

Troubleshooting

1.Check whether the pipeline of pressure system is blocked or there is gas leakage. The pressure system

includes:

(1) Gas-collecting valve

(2) Rubber pipe

(3) Pipe clip2.Blow on the pressure switch and "click, click" can be heard. Otherwise, replace the pressure

switch with a new one.

VII .No heating or automatic heating

Possible causes

1.Thermostat breakdown

2.Effect of ambient temperature

3.The water-heating pipe is broken.

1.Check whether the knob of temperature controller clicks at room temperature. If not, make necessary

replacement.

Note:

1).The temperature controller breaks down when it is cold and no click can be heard. Warm the room and

the temperature controller will get normal.

2).The water is automatically heated when it is cold and the temperature knob is at "0" position. The

process stops when the water is about 30°C.

2.Check the water-heating pipe to see whether the resistance wire is normal. If not, make necessary

replacement.

VIII .Water leakage

Possible causes

1.Leakage at joints

2.The reinforcement of outer cylinder is poorly welded.

3.There is foreign object on the cushion of sight window.

Troubleshooting

1.Check whether the joints are damaged or loose.

1).Filling pipe

2).Hose connecting electromagnetic valve to dispenser

3).Hose connecting dispenser to outer cylinder

Front Load Washer Model:HBF600T

4).Cushion of sight window

5).Hose connecting outer cylinder to pump

6).Drainage pump

7).Gas-collecting valve

8).Dispenser

9)Condenser

10) Hose connecting condenser to hose of outer cylinder

2.For leakage resulting from the welding defect of outer cylinder, replace the outer cylinder.

3.Wipe off the foreign object from the cushion of sight window.

IX .Improper distribution of dispenser

Possible causes

1.The extension spring loses.

2.Misfit of eccentric wheel, follower and liner

3.Fault of gear of dispenser

Troubleshooting

1.Reassemble the extension spring

2.Reassemble the eccentric wheel, follower and the liner

3.Adjust the gear of dispenser

X . The outer case becomes live.

Possible causes

1.Whether the electric circuit is good.

2.The washer is not safely earthed.

3.The damaged rubber sheath of the power cord results in electric leakage.

Troubleshooting

1.Check whether the insulation of power cord is good. If not, make necessary replacement.

2.Earth the washer safely.

3.Check the condition of rubber sheath of the power cord and wrap the damaged parts with insulation

tape.

XI .The door lock indicator does not light.

Possible causes

1.The door lock indicator is broken.

2.The wiring of micro delay switch is loose.

3.The indicator loses.

Troubleshooting

1.Replace the broken indicator.

2.Tighten the stub of micro delay switch.

3.Refasten the indicator.

Front Load Washer Model:HBF600T

XII .No function or malfunction of program controller

Possible causes

1.The motor of program controller loses or the stub is sealing-off.

2.The knob of program controller is stuck.

3.Poor contact of wiring of program controller.

4.Poor contact at inner contacts of program controller (even after the all the plug wires are tightened.)

Troubleshooting

1.Reassemble the motor of program controller and make spot welding of the stubs (the operation of

program controller and motor can be heard after the appliance is turned on.)

2.Adjust the position of knob of program controller.

3.Tighten the stubs of program controller one by one.

4.Replace the program controller with a new one.

Unpack and installation

I.Unpack

1.Remove all the outer packaging.

2.Tally the attached accessories and literature.

3.Disassemble the packing bolts.

Packing bolts are designed for fixing of inner accessories. Before operation, disassemble the back cover of

the washer, remove the three packing bolts on the back cover and three packing bolts on the tub to take

out the three packing reinforcements and reassemble the back cover to as original. The holes left over

after the packing bolts have been disassembled should be blocked with waterproof plastic plugs accessory

to the machine. (Please keep the packing bolts and rubber bushing in a safe place.)

4.Level the washer.

Adjust the adjustable foot of the washer to level it.

II. Install

Install the washer correctly before operation.

1.Drainage pipe

1).The length of the drainage pipe is 1,800mm and the outside diameter and the inside diameter are

28mm and 20mm respectively.

2).The water outlet should be 80cm to 100cm above the floor. Take necessary measures to prevent the

drainage pipe from separation. For example, use pipe clips at the back of the washer to fasten the hose.

3). In case that the washer is far from the water source, use extension pipe or pipe through the wall,

provided the extension pipe is less than 5 meters, the diameter of the extension pipe is the same as the

original one and the extended part is firmly connected and leakless).

Page is loading ...

Haier HBF600T User manual

Brand: Haier

Model: HBF600T

Category: Washing machines

Type: User manual

This manual is also suitable for

HBF1055TVE

Download PDF

report

Haier HBF600T User manual

This manual is also suitable for

Haier HBF600T User manual

Related papers

Other documents