Avid Pro Tools AVoption V10 6.3 Operating instructions

Digidesign

2001 Junipero Serra Boulevard

Daly City, CA 94014-3886 USA

tel: 650·731·6300

fax: 650·731·6399

Technical Support (USA)

tel: 650·731·6100

fax: 650·731·6384

Product Information (USA)

tel: 650·731·6102

tel: 800·333·2137

International Ofﬁces

Visit the Digidesign Web site

for contact information

Web Site

www.digidesign.com

Pro Tools

AVoption|V10 and

Media Station|V10 Guide

Version 6.3 for HD Systems on Windows

Copyright

Avid Technology, Inc. (hereafter “Digidesign”), with all rights

reserved. Under copyright laws, this guide may not be

duplicated in whole or in part without the written consent of

Digidesign.

DIGIDESIGN, AVID and PRO TOOLS are trademarks or

registered trademarks of Digidesign and/or Avid Technology,

Inc. All other trademarks are the property of their respective

owners.

Product features, specifications, system requirements, and

availability are subject to change without notice.

PN 910612411-00 REV A 03/04

Warnings and Cautions

• Never install equipment if it appears damaged.

• Disconnect the power cord before servicing unit.

• Only perform the services explicitly described in this

document. For services or procedures not outlined in this

document, speak with authorized Avid service personnel.

• Follow all warnings and cautions in the procedures.

• Operate the device within its marked electrical ratings and

product usage instructions.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and,

if not installed in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Canadian ICES-003

This Class A digital apparatus meets all requirements of the

Canadian Interference Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du Canada.

European Union Notice

Australia and New Zealand EMC Regulations

John Kells, Australian Operations Manager

Avid Technology (Australia)

Unit B

5 Skyline Place

French Forest NSW 2086

Australia

Phone: 61-2-8977-4800

Taiwan EMC Regulations

Taiwan EMC Regulations BSMI Class A EMC Warning

CLASS 1 LED PRODUCT

N1709

Declaration of Conformity

(According to ISO/IEC Guide 22 and EN 45014)

Application of Council

Directives:

73/23/EEC, 89/336/EEC.

Standards to which

Conformity is

Declared:

EN60950:1999 Third Edition

CISPR 22:1997 / EN55022:1994 + A1:1995 + A2:1997 Class A

EN55024:1998/EN61000 — 3-2, 4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11

Manufacturer’s

Name:

Avid Technology, Inc.

1925 Andover Street

Tewksbury, MA 01876, USA

European Contact: Nearest Avid Sales and Service Office or

Avid Technology International B.V.

Sandyford Business Center

Unit 3,

Dublin 18, Ireland

Type of Equipment: Information Technology Equipment

Product Name: Products for the Windows NT, Windows 2000, or Windows XP Operating System: Avid Adrenaline

DNA, Avid DS Nitris DNA, Avid Equinox Break-Out-Box, Avid|DS, Avid Xpress, Avid Xpress DV,

Film Composer, Media Composer, MediaDock 2+, MediaDock LVD, MediaDrive, MediaRAID,

MEDIArray, MEDIArray Drive, MEDIArray II, MEDIArray II Drive, Meridien I/O box, NewsCutter,

NewsCutter DV, NewsCutter XP, Pro Tools AVoption|V10, Symphony

Products for the Mac OS X Operating System: Avid Adrenaline DNA, Avid Xpress, Avid Xpress DV,

Film Composer, Media Composer, MediaDock 2+, MediaDock LVD, MediaDrive, MediaRAID,

MEDIArray, MEDIArray Drive, MEDIArray II, MEDIArray II Drive, Meridien I/O box,

Pro Tools AVoption|V10, Symphony

Products for the UNIX Operating System: AirPlay, VideoSPACE

Products for MediaNetwork and Workgroups: Avid ProEncode, Avid Unity MediaManager, Avid Unity

MediaNetwork, Avid Unity TransferManager, LANserver, LANserver EX, MEDIArray, MEDIArray Drive,

MEDIArray II, MEDIArray II Drive, Nearchive, PortServer, Xdeck

Base Model

Numbers:

None

Product Options: All

(1) Products for the Windows NT, Windows 2000, or

Windows XP Operating System: products were tested in a

typical Avid Adrenaline DNA, Avid DS Nitris DNA, Avid Equinox

Break-Out-Box, Avid|DS, Avid Xpress, Avid Xpress DV,

Film Composer, Media Composer, MediaDock 2+, MediaDock

LVD, MediaDrive, MediaRAID, MEDIArray, MEDIArray Drive,

MEDIArray II, MEDIArray II Drive, Meridien I/O box,

NewsCutter, NewsCutter DV, NewsCutter XP,

Pro Tools AVoption|V10, or Symphony configuration.

(2) Products for the Mac OS X Operating System: products

were tested in a typical Avid Adrenaline DNA, Avid Xpress,

Avid Xpress DV, Film Composer, Media Composer,

MediaDock 2+, MediaDock LVD, MediaDrive, MediaRAID,

MEDIArray, MEDIArray Drive, MEDIArray II, MEDIArray II Drive,

Meridien I/O box, Pro Tools AVoption|V10, or Symphony

configuration.

(3) Products for the UNIX Operating System: products were

tested in an AirPlay or VideoSPACE configuration.

(4) Products for MediaNetwork and Workgroups: products were

tested in a typical Avid ProEncode, Avid Unity MediaManager,

Avid Unity MediaNetwork, Avid Unity TransferManager,

LANserver, LANserver EX, MEDIArray, MEDIArray Drive,

MEDIArray II, MEDIArray II Drive, Nearchive, PortServer, or

Xdeck configuration.

I, the undersigned, hereby declare that the equipment

specified above conforms to the above Directives and

Standards.

George R. Smith, Director of Hardware Engineering

Contents

vii

contents

Chapter 1. Introduction to Pro Tools AVoption|V10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

AVoption|V10 Components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

DigiTranslator 2.0 Integrated Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

MachineControl

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Avid Unity MediaNetwork

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Compatibility

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Digidesign Registration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

About the Pro Tools Guides

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2. AVoption|V10 Hardware Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

AVoption|V10 Hardware Capabilities

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

AVoption|V10 Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Synchronization Hardware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 3. Installing AVoption|V10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Uninstalling Pro Tools Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing Pro Tools Hardware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing AVoption|V10 Hardware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing Media Station|V10 Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing Pro Tools Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing AVoptionDNA Software Components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Starting Up Your System

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Authorizing Media Station|V10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Authorizing DigiTranslator 2.0

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Updating Firmware on Application Launch

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using NTSC and PAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting Up Local Storage

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Pro Tools AVoption|V10 and Media Station|V10 Guide

viii

Chapter 4. Media Station|V10 Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Avid Nomenclature

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Starting a New Project with Media Station|V10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Capturing Audio and Video

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Importing Non-OMFI Media Files

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Preparing a Sequence for Export

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Exporting a Sequence

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Import from Pro Tools

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Recording Audio and Video to Tape

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Exporting a Digital Movie

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Deleting Clips, Sequences and Media

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Chapter 5. Pro Tools Movie Track

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Avid Movie Track in Pro Tools

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Movie Track Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Exporting Files from Avid Programs

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Adding Video Clips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Undo/Redo for Video Editing Commands

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Movie Online

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Movie Offline

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Viewing Video Playback

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Moving the Movie Track or Video Clips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Copying Video Clips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Clearing Selected Video Clips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Locking the Movie Track

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

QuickTime Movie Sync Offset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Scrub Movie Window

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Appendix A. 24fps Workflows

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Appendix B. PCI Slot Configurations for AVoption|V10

. . . . . . . . . . . . . . . . . . . . . . . . . 55

Appendix C. Video Buffer Underrun Errors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chapter 1: Introduction to Pro Tools AVoption|V10

1

chapter 1

Introduction to Pro Tools AVoption|V10

Pro Tools with AVoption|V10 combines the

powerful audio post-production features of

Pro Tools|HD with integrated support for import

and playback of Avid video media. Avid

Media Station|V10 software is included with

AVoption|V10, providing video capture and re-

conform, AAF/OMF render and export of Avid

sequences, and professional audio and video

layback.

AVoption|V10 Components

AVoption|V10 includes the following:

• AVoption|V10 breakout box

• FireWire connector cable

•Two optical (ADAT lightpipe) cables

• AC Power cable

• Pro Tools Installer CD-ROM, including:

• Pro Tools TDM software

•AVoption|V10 software components

•Avid Media Station|V10 Installer CD-ROM

•Avid Media Station|V10 application key

• DigiTranslator 2.0 iLok License Card

Pro Tools AVoption|V10

Capabilities

Pro Tools with AVoption|V10 lets you:

• Import and play back Avid video on the

Pro Tools Movie track with near sample-accu-

rate precision against audio tracks.

•Spot individual video clips to new locations in

the Movie track.

•View video edits and clip deﬁnitions in the

Movie track.

•View the Movie track as a series of picture

frames.

• Play video on an external NTSC or PAL moni-

tor.

• Import mixed video resolutions to the Movie

track.

• Import and play back true 24P and 25P (Pro-

gressive Scan) picture media created in Avid

video workstations.

Pro Tools AVoption|V10 and Media Station|V10 Guide

2

Avid Media Station|V10

Capabilities

Avid Media Station|V10 software with AVop-

tion|V10 lets you:

• Capture NTSC or PAL video.

• Import QuickTime clips as Avid video for eas-

ier handling.

• Import, batch digitize, and render Avid se-

quences, then export them as AAF sequences

to Pro Tools.

• Digitize audio and video from an EDL by cre-

ating an Avid sequence with Avid EDL Man-

ager™.

• Lay back audio and video simultaneously

with Digital Cut.

• Export audio and video sequences as Quick-

Time or other format digital ﬁles.

DigiTranslator 2.0 Integrated

Option

DigiTranslator 2.0 is included with AVop-

tion|V10. Use DigiTranslator to convert AAF and

OMFI sequences into Pro Tools session ﬁles. You

can also use it to export audio material from

Pro Tools sessions to AAF sequences or OMFI se-

quences and ﬁles for import into other systems.

MachineControl

You can use Digidesign’s MachineControl soft-

ware to remotely control your external audio

and video decks from Pro Tools. Machine-

Control is a Pro Tools software option that can

be purchased separately.

Avid Unity MediaNetwork

Pro Tools with AVoption|V10 supports Avid

Unity™ MediaNetwork. Avid Unity MediaNet-

work provides integrated high-speed network

storage systems for Avid and Pro Tools worksta-

tions.

For detailed information on configuring your

Pro Tools system with AVoption|V10 as an Avid

Unity MediaNetwork client, see the

Pro Tools

Client Avid Unity™ MediaNetwork Guide

. Also, re-

fer to the Avid Unity compatibility pages of the

Digidesign Web site (www.digidesign.com/com-

pato), as well as your Avid Unity MediaNetwork

documentation.

Pro Tools with AVoption|V10 does not sup-

port 24 or 23.976 fps video output. Though

24 and 23.976 fps video clips are sup-

ported, the actual output of Pro Tools is

limited to NTSC (29.97 fps) and PAL (25

fps) standards. On playback, 24 fps clips

are converted in software to these stan-

dards. This conversion can produce visible

artifacts. Pro Tools video playback is in-

tended for monitoring purposes only, and is

not suitable for professional layback or

broadcast, regardless of the resolution or

frame rate of the video clip. Video output

from Media Station|V10 software is profes-

sional quality.

Media Station|V10 is not compatible with

Windows XP Hotfix - KB824141. If you

use Microsoft Update, do not install this ho-

fix. If it is already installed, remove it using

the Add/Remove Programs Control Panel.

For more information, refer to the Digi-

Translator 2.0 Integrated Option Guide

.

For more information, see the Machine-

Control Guide.

Chapter 1: Introduction to Pro Tools AVoption|V10

3

Compatibility

Digidesign can only assure compatibility and

provide support for hardware and software it

has tested and approved.

For a list of Digidesign hardware systems, Digi-

design-qualified computers, operating systems,

and third-party devices and software, refer to

the latest compatibility information on our Web

site (www.digidesign.com/compato).

System Requirements

•A Digidesign-qualiﬁed Pro Tools|HD system.

• SYNC I/O.

•Digidesign-qualiﬁed storage:

•SCSI: Pro Tools with AVoption|V10 requires

separate SCSI drives for audio and video. A

Digidesign-qualiﬁed dual-channel SCSI

HBA (such as the Digidesign SCSI|128 or

ATTO UL3D) is required. If your computer

has built-in dual channel SCSI that has

been qualiﬁed by Digidesign (such as the

HP xw8000), a SCSI HBA is not required.

The audio drives and the video drives

should each be connected to separate SCSI

channels. For more information, see “Set-

ting Up Local Storage” on page 19.

• Fibre Channel Host Bus Adapter (HBA) for

Avid Unity™ MediaNetwork.

On Windows systems, AVoption|V10 is

only qualified with the Nvidia Quadro 4

980 XGL AGP monitor card, which re-

quires Nvidia driver version 53.03. This

driver is available for download from:

http://www.nvidia.com/content/driv-

ers/drivers.asp

Also, the NVIDIA Display Driver Service

should be disabled. To disable this service,

select START > MY COMPUTER > MAN-

AGE > SERVICES. Right Click the NVidia

service. Choose properties and disable.

For local storage, audio and video record

and playback are supported with SCSI

drives only. FireWire drives are not cur-

rently supported with AVoption|V10. See

the Digidesign Web site (www.digide-

sign.com/compato) for the latest compati-

bility updates.

Pro Tools AVoption|V10 and Media Station|V10 Guide

4

Digidesign Registration

Make sure to complete and return the registra-

tion card included with AVoption|V10. Regis-

tered users will receive periodic software update

and upgrade notices. Refer to the registration

card for information on technical support.

About the Pro Tools Guides

In addition to the printed guides that came with

your system, PDF versions of the Pro Tools

guides are installed automatically with

Pro Tools in the following directory:

Program Files\Digidesign\Pro Tools\Documen

tation. To view or print the PDF guides, install

Acrobat Reader (included on the Pro Tools In-

staller CD-ROM).

Conventions Used in This Guide

Digidesign guides use the following conven-

tions to indicate menu choices and key com-

mands:

:

The following symbols are used to highlight im-

portant information:

Convention Action

File > Save Session Choose Save Session from

the File menu

Control+N Hold down the Control key

and press the N key

Control-click Hold down the Control key

and click the mouse button

Right-click (Windows) Click with the right mouse

button

User Tips are helpful hints for getting the

most from your system.

Important Notices include information that

could affect your data or the performance of

your system.

Shortcuts show you useful keyboard or

mouse shortcuts.

Cross References point to related sections in

other Digidesign guides.

Chapter 2: AVoption|V10 Hardware Overview

5

chapter 2

AVoption|V10 Hardware Overview

AVoption|V10 Hardware

Capabilities

AVoption|V10 hardware:

• Receives composite, component, S-video, or

SDI video signal.

• Digitizes incoming video using

Media Station|V10 software.

• Outputs composite, component, S-video, and

SDI video signals.

• Plays back all ABVB, JFIF, and IMX resolu-

tions, interlaced and progressive scan, un-

compressed JFIF, and DV25.

Supported Video Resolutions

Pro Tools AVoption|V10 supports the following

video resolutions for import, export, and play-

back:

• All Avid OMF video ﬁles

• DV Resolutions, DV 25 and DVC Pro 25, com-

pressed with the Avid codec:

• DV25 411: DV25 interlaced scan at 4:1:1

sampling (for NTSC 30i and PAL 25i

projects)

• DV25 420: DV25 interlaced scan at 4:2:0

sampling (for PAL 25i projects)

• DV25p 411: DV25 progressive scan at 4:1:1

sampling (for NTSC 23.976p and NTSC 24p

projects)

•DV25p 420: DV25 progressive scan at 4:2:0

sampling (for PAL 25p and PAL 24p

projects)

The oldest class of ABVB files (ABVB

“MSM” files) are not supported in Pro Tools

or Media Station|V10. These files were cre-

ated with versions of Media Composer ear-

lier than 7.0, and do not have the .omf ex-

tension.

At the time of this writing, IMX video files

are supported in Media Station|V10, but

not Pro Tools. Use Media Station|V10 to

transcode these files to a format supported

by Pro Tools. Check the Digidesign Web

site (www.digidesign.com/compato) for up-

dates on support for these formats.

While Media Station|V10 supports all Avid

OMF video files, Pro Tools does not support

MXF or IMX media files at the time of this

writing. Pro Tools also does not currently

support NTSC 23.976p frame rate. For soft-

ware updates, check the Digidesign Web

site (www.digidesign.com/compato).

In Media Station|V10, when capturing

from the AVoption|V10 DV input, resolu-

tion options for capture are limited to: 1:1,

15:1s, DV25 420, and DV25 411.

Pro Tools AVoption|V10 and Media Station|V10 Guide

6

Support for Mixed Video Resolutions

Pro Tools AVoption|V10 supports Avid video

clips of mixed resolutions in the Movie track.

For example, the Movie track can contain Avid

DV25 and 15:1s clips. However, all clips must be

Avid clips of the same frame rate. Mixed clips

with different frame rates are not supported.

Mixing Avid and QuickTime video clips is

not

supported.

AVoption|V10 Interface

The following sections describe the of functions

of the AVoption|V10 breakout box.

AVoption|V10 Front Panel

The front panel of the AVoption|V10 (see

Figure 1) has eleven indicators and a power

switch. When the AVoption|V10 is powered on,

the indicators turn on and off as it goes through

a power-on self-test (POST).

The front panel of the AVoption|V10 breakout

box provides the following LED indicators:

HD (Yellow)

Is currently non-functional.

SD (Green)

Lights when Standard Definition

(SD) codec selected.

DV (Yellow)

Lights when DV input is selected in

Media Station|V10 software.

NTSC (Yellow)

Lights when an NTSC project is

selected.

PAL (Green)

Lights when a PAL project is se-

lected.

Ref (Green)

Lights when the AVoption|V10 is

locked to the incoming Reference signal.

Pull Down (Green)

Lights when Pull Down is se-

lected in Media Station|V10 software. For indi-

cation of any pull-downs applied by Pro Tools,

see the indicator light on the SYNC I/O.

LTC (Green)

Lights when LTC IN is being input

to AVoption|V10.

44.1 (Yellow)

Lights when 44.1 kHz audio is se-

lected.

48 (Green)

Lights when 48 kHz audio is se-

lected.

96 (Green)

Is currently non-functional.

Figure 1. AVoption|V10 breakout box front panel

Power switch

Chapter 2: AVoption|V10 Hardware Overview

7

AVoption|V10 Back Panel

Figure 2. AVoption|V10 back panel

1 2 3 4 5 6

18171513

12

10

19

87

9

11 14 16 20

21

22 23

Table 1. Video I/O Identiﬁers

Number Label Function, Type of Connector, and Usage

1Video Reference (REF) Black burst or house synchronization input, BNC connector.

Synchronizes the system with the global clock source pro-

vided by the house sync or black burst generator.

2 COMPONENT Y IN Video Y component input, BNC connector. Connects to ana-

log video output of decks.

3 COMPONENT R-Y IN Video R-Y component input, BNC connector. Connects to

analog video output of decks.

4 COMPONENT B-Y IN Video B-Y component input, BNC connector. Connects to

analog video output of decks.

5 COMPOSITE IN Composite video input, BNC connector. Connects to analog

video output of decks.

6 S-VIDEO IN Super-video input, 4-pin connector. Connects to analog video

output of decks.

7 S-VIDEO OUT Super-video output, 4-pin connector. Connects to analog

video input of decks.

8 COMPONENT Y OUT Video Y component (Betacam) output, BNC connector. Con-

nects to analog video input of decks.

Pro Tools AVoption|V10 and Media Station|V10 Guide8

9 COMPONENT R-Y OUT Video R-Y component (Betacam) output, BNC connector.

Connects to analog video input of decks.

10 COMPONENT B-Y OUT Video B-Y component (Betacam) output, BNC connector.

Connects to analog video input of decks.

11 COMPOSITE OUT 1 Composite video output, BNC connector. Connects to analog

video input of decks or monitor.

12 COMPOSITE OUT 2 Composite video output, BNC connector. Connects to analog

video input of decks or monitor.

13 SDI IN Serial digital input, BNC connector. Connects to a serial dig-

ital output from a digital video source.

14 SDI OUT 1 Serial digital output number 1, BNC connector. Connects to

VTR input, a video monitor, or other serial digital device.

15 SDI OUT 2 Serial digital output number 2, BNC connector. Connects to

VTR input, a video monitor, or other serial digital device.

16 SDTI IN Not currently used.

17 SDTI OUT Not currently used.

18 1394 Host Connects to any available 1394 (FireWire) port on the CPU.

19 1394 DV Connects to the DV source deck.

20 LTC IN Receives LTC time code.

21 LTC OUT Sends LTC time code out (not used).

22 OPTICAL IN Connects to the Optical Out of the primary Pro Tools|HD

audio interface.

23 OPTICAL OUT Connects to the Optical In of the primary Pro Tools|HD audio

interface.

Table 1. Video I/O Identiﬁers

Number Label Function, Type of Connector, and Usage

Chapter 2: AVoption|V10 Hardware Overview 9

Video Connections

The following video input and output connec-

tions are available with the AVoption|V10:

• Inputs for composite, component (Y, R-Y,

B-Y), S-Video, DV (1394), and SDI.

• Outputs for composite, component (Y, R-Y,

B-Y), S-Video, DV (1394), and SDI.

•Video Ref input to allow the video to be

locked to an external source such as house

sync or a black burst generator.

All analog video outputs are active during cap-

ture and playback. A video monitor can be con-

nected to any of the following video outputs on

the AVoption|V10:

• Component

• Composite

• SDI

• S-Video

•DV

Synchronization Hardware

Synchronization Peripheral

AVoption|V10 requires the Digidesign SYNC I/O

for use with Pro Tools|HD systems.

Synchronization Source

For accurate synchronization during capture

and playback, a common video reference is re-

quired:

• Black burst

• House Reference Synchronization source

• Local video source (such as the TBC video

output of the machine)

If you use the DV connection for a video

monitor, the DV device may not be synchro-

nized with playback.

When digitizing from a DV25 source, the

video monitor will not display the output.

The output is displayed on the computer

monitor in Media Station|V10 instead. The

video monitor will display the output when

digitizing from any other source.

Pro Tools AVoption|V10 and Media Station|V10 Guide10

Chapter 3: Installing AVoption|V10 11

chapter 3

Installing AVoption|V10

Pro Tools with AVoption|V10 and

Media Station|V10 must be installed in the fol-

lowing order:

1 Uninstall any previous version of Pro Tools

software, if present (any currently installed

Pro Tools hardware does not need to be re-

moved): See “Uninstalling Pro Tools Software”

on page 11.

2 Install Pro Tools hardware (if necessary): See

“Installing Pro Tools Hardware” on page 12.

3 Install AVoption|V10 hardware: See “Install-

ing AVoption|V10 Hardware” on page 12.

4 Install Media Station|V10 software: See “In-

stalling Media Station|V10 Software” on

page 15.

5 Install Pro Tools software: See “Installing

Pro Tools Software” on page 16.

6 Install AVoptionDNA software components:

See “Installing AVoptionDNA Software Compo-

nents” on page 17.

7 Setup local storage (if necessary): See “Setting

Up Local Storage” on page 19.

Uninstalling Pro Tools

Software

If you are upgrading your Pro Tools system with

AVoption|V10, you must first uninstall

Pro Tools software before installing

Media Station|V10 software. However, you do

not need to remove your Pro Tools hardware.

To uninstall Pro Tools software:

1 Choose Start > Control Panel.

2 Launch Add or Remove Programs.

3 From the Currently Installed Programs list, se-

lect Digidesign Pro Tools TDM.

4 Click the Change/Remove button.

5 Follow the onscreen instructions to remove

Pro Tools.

Pro Tools AVoption|V10 and Media Station|V10 Guide12

Installing Pro Tools Hardware

If you do not already have a currently supported

Pro Tools system installed, you must install your

Pro Tools hardware. For detailed Pro Tools hard-

ware installation information, see your Getting

Started Guide.

If you already have Pro Tools hardware in-

stalled, proceed by installing the AVoption|V10

hardware (see “Installing AVoption|V10 Hard-

ware” on page 12).

Be sure to follow the correct PCI slot placement

of your Pro Tools cards according to the infor-

mation in Appendix B, “PCI Slot Configurations

for AVoption|V10.”

Installing AVoption|V10

Hardware

To install AVoption|V10 hardware:

1 Connect the power cable for the AVop-

tion|V10 breakout box.

2 Connect one end of the FireWire cable to the

Host port on the AVoption|V10 breakout box,

and connect the other end to any an internal

1394 (FireWire) port on your computer.

For the latest information on supported

computers and PCI slot configuration, be

sure to check the AVoption|V10 compatibil-

ity pages on the Digidesign Web site

(www.digidesign.com/compato).

The Pro Tools and AVoption|V10 hard-

ware must be installed before installing

Media Station|V10 software, Pro Tools

software, and the AVoption|V10 software

components.

The AVoption|V10 should be the only de-

vice attached to the FireWire bus. No other

FireWire devices should be attached to the

FireWire bus.

The internal FireWire (1394) bus shares

one segment of the PCI bus. No other PCI

cards may be installed on the same PCI bus

segment as the AVoption|V10. The division

of PCI bus segments between PCI slots var-

ies with different models of computers, so it

is critical to follow the card installation di-

rections in Appendix B, “PCI Slot Configu-

rations for AVoption|V10.”

Page is loading ...

Avid Pro Tools AVoption V10 6.3 Operating instructions

This manual is also suitable for

Avid Pro Tools AVoption V10 6.3 Operating instructions

Related papers

Other documents