MO NE T -R S 5500
AS S E MB LY DIAG R AM
Delta C yc le C orporation
21 C oc as s et S treet
F ox borough, MA 02035 US A
P AR T:
1
1. Locate Stud beneath wallboard.
2. Position Shelf at desired height and screw
into place. (screws should be in center of Wall Stud)
NOTE: Make sure the Shelf is level when mounting.
3
Slide Cables into mounts on Main Frame and shelf.
Solid Wall
5/16" Hole
(7MM)
Plastic Expander is
tapped into wall
Supplied Screw
Solid Wall Installation
Mark Mounting Points accurately
on wall BEFORE drilliing any holes.
2
WARNING: Make sure cables are Fully Seated
before using Selves.
Fully Seated.
WARNING: Max Weight 50LBS
Wallboard
Stud
Ó
Copyright 2004