2. Dunlop
  3. M133

Dunlop M133 User manual

  • Hello! I am an AI chatbot trained to assist you with the Dunlop M133 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
92503016108revB
M133 MICRO AMP
M133 MICRO AMP
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
GAIN knob controls overall
amount of signal boost
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)
POWER
The MXR Micro Amp is powered by
one 9-volt battery (remove bottom
plate to install), a 9-volt AC adapter
such as the Dunlop ECB003/
ECB003E or a power supply
such as the DC Brick
™
.
DESCRIPTION
•Upto+26dBofgain
•Perfectforswitchingbetween
guitarswithunmatchedoutput
•Greatforusewithlongsignal
chains,oranytimesignaldrop-off
is a problem
DIRECTIONS
•Runacablefromyourguitar
totheMicroAmp’sINPUTjack
andrunanothercablefromthe
MicroAmp’sOUTPUTjackto
your amplifier.
•Startwiththecontrolat
12o’clock.
•Turntheeffectonbydepressing
thefootswitch.
•RotatetheGAINknobclockwise
to increase amount of signal
boostorcounterclockwiseto
decrease it.
SPECIFICATIONS
InputImpedance 1MΩ
Output Impedance 470 Ω
MaximumOutputLevel +6dBV
NoiseFloor* -80dBV
GainControl +0.5dBto+26dB
Freq.Response 20Hzto20kHz,
+0dB,-1.4dB
Bypass Hardwire
CurrentDraw 2.5mA
PowerSupply 9voltsDC
*A-weighted, Gain control at maximum
clockwise position
/