Dunlop EVH5150 User manual

Brand: Dunlop

Model: EVH5150

Type: User manual

Dunlop EVH5150 is a versatile overdrive pedal that delivers legendary EVH tones. Its 3-band EQ offers precise shaping of your sound, while the Boost switch adds extra gain and compression. The built-in noise gate eliminates unwanted noise, making it suitable for both clean and distorted playing. With its wide range of controls and classic EVH tones, the Dunlop EVH5150 is an ideal choice for guitarists seeking versatile overdrive capabilities.

92503018642REVA

jimdunlop.com

POWER

The 5150 Overdrive is powered

by one 9-volt battery (remove

bottom plate to install), a 9-volt

AC adapter such as the Dunlop

ECB003/ECB003EU, or the

DC Brick

™

and Iso-Brick

™

power supplies.

DESCRIPTION

• Designed in close collaboration

with Eddie Van Halen

• Infuses any rig with legendary

EVH tones

• Features 3-band EQ section for

versatile tweakability

• Boost switch adds extra gain

and compression

• Gate control engages noise gate

DIRECTIONS

• Run a cable from your guitar

to the EVH5150’s INPUT jack

and run another cable from the

EVH5150’s OUTPUT jack to

your ampliﬁer.

• Turn the effect on by

depressing the footswitch.

• Start with GATE control fully

counterclockwise and all other

controls at 12 o’clock.

• Rotate OUTPUT control

clockwise to increase effect

volume or counterclockwise

to decrease it.

• Rotate BASS control clockwise

to boost low end frequencies or

counterclockwise to cut them.

• Rotate MID control clockwise to

boost midrange frequencies or

counterclockwise to cut them.

• Rotate TREBLE control

clockwise to boost high

end frequencies or counter-

clockwise to cut them.

• Rotate GAIN control clock-

wise to increase intensity of

overdrive or counterclockwise

to decrease it.

• Push the BOOST switch for

increased gain and compression.

• Rotate GATE control clockwise

to engage the EVH5150’s noise

gate and raise its threshold.

GATE knob will illuminate yellow

when noise gate is active.

Turning GATE control fully

counterclockwise shuts the

noise gate OFF.

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: 1-707-745-2722 FAX : 1-707-74 5-2658

EVH 515 0

™

OVERDRIVE

CONTROLS

GATE control engages noise

gate—knob illuminates yellow

when active—and sets gate

threshold

OUTPUT knob controls overall

effect volume

BASS knob cuts/boosts low

frequencies

MID knob cuts/boosts

midrange frequencies

TREBLE knob cuts/boosts

high frequencies

GAIN knob sets overdrive

intensity

BOOST switch increases amount

of gain and compression

FOOTSWITCH toggles effect on/

bypass (blue LED indicates on)

OUTPUT INPUT

OUTPUT BASS MID TREBLE

GATE

BOOST

GAIN

overdrive

OUTPUT INPUT

OUTPUT BASS MID TREBLE

GATE

BOOST

GAIN

overdrive

1 2

3 4 5 6 7

SPECIFICATIONS

Input Impedance 740 k Ω

Output Impedance 1 kΩ

Nominal Output Level* -22 dBV

Maximum Output Level 0 dBV

Noise Floor**

Gate Open -76 dBV

Gate Closed -93 dBV

Controls

BOOST Preamp Gain, +6 dB

BASS ±5 dB, 30 Hz

MID ±5 dB, 650 Hz

TREBLE ±5 dB, 10 kHz

Bypass True Hardwire

Current Draw

Bypassed 12.5 mA

Effect on, Gate

Engaged

14.5 mA

Power Supply DC 9 volts

*All controls at mid position

**A-Weighted, all controls at mid position

SAMPLE SETTINGS

CLASSIC OD

OUTPUT BASS MID TREBLE

GATE

BOOST

GAIN

CLASSIC DISTORTION

OUTPUT BASS MID TREBLE

GATE

BOOST

GAIN

MODERN DISTORTION

OUTPUT BASS MID TREBLE

GATE

BOOST

GAIN

Dunlop EVH5150 User manual

Dunlop EVH5150 User manual

Dunlop EVH5150 User manual

Related papers

Other documents