Brandt DVH1342J Owner's manual

Category
Dishwashers
Type
Owner's manual
EN INSTRUCTION MANUAL
Reviewing the section on troubleshooting Tips will help
you solve some common problems by yourself.
Dea r Customer,
Please carefully read th is manual before using the
dishwasher, it will help you use and mainta in the
dishwasher properl y.
Pass it on to any subsequen t owner of the app liance.
This manual contains sections on safety Instructions,
Operating Instructions, Inst allat ion Instructions and
Troubleshooting Tip s, etc.
The man ufacture r, following a policy of con stant
dev elopment and updating of the product, may
make modificatio ns witho ut giving prior notice.
If lost or out-of-date, you can receive a new user
manual from the manufacturer or responsible
vendor.
Keep this manual for future reference.
If you cannot solve the problems by yourself,
please ask for help from a professional technician.
Dishwasher Features.................................... ........6
A Water So ftener............ ......... ......... .... .... ..........7
................................... ............... 12
Recommendations fo r loading and unl oading
the dishwasher
Filter System................ ......... ........................ ......16
Caring for the Dishwasher........... .......... ............. .17.
B Loading th e Salt into the Softener......................8
C Filling the Rinse Aid Dispenser........ ........ ......... 8
D Function of Detergent ........... ........................ ...9
Loading the upper ....................................13Basket
Loading the Lower ....................................13Basket
Wash Cycle Table................................................14
Turning on the Appliance.....................................14
... ......... ..............15
Changing the Program mid-cyc le
At the en d of th e Wash Cycle................................15
Before calling for service........................... ..........25.
Error codes.................................... ...................26.
Technical information.............................. ..... .....27..
Control Panel.. ........... .... ........... .... ............... .........6
Inst allation preparation. ......... ........................ .....18
........19Aesthetic panel's dimensions and installation
Tension adjustment of the door spring ...................21
Connection of drain hoses...... ........................ .....21
Dishwasher installation steps......................... .....22
About Electricity Con necting................................23
Cold Water Conne ction. ................... .............. .....24
1
This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be done by children
without supervision.(For EN60335-1)
Packaging material could be dangerous for children!
This appliance is for indoor household use only.
To protect against the risk of electrical shock,
do not immerse the unit, cord or plug in water or
other liquid.
Please unplug before cleaning and performing
maintenance on the appliance.
Use a soft cloth moistened with mild soap, and then
use a dry cloth to wipe it again.
When using your dishwasher,
follow the precautions listed below:
2
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the
risk of an electric shock by providing a path of least
resistance of electric current. This appliance is
equipped with an earthing conductor plug.
The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all
local codes and ordinances.
Improper connection of the equipment-earthing
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance;
If it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not operate your dishwasher unless all enclosure
panels are properly in place.
Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
3
2) Warning: Knives and other utensils with sharp points
must be loaded in the basket with their points
down or placed in a horizontal position.
Check that the detergent powder is empty after
completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent.
For check the
manufacturer's recommendations.
Use only detergent and rinse agents recommended for
use in an automatic dishwasher.
The door should not be left open, since this could increase
the risk of tripping.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
During installation, the power supply must not be
excessively or dangerously bent or flattened.
Do not tamper with controls.
The maximum number of place settings to be washed
is 13.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.
facing
unmarked plastic items not so marked,
Never use soap, laundry detergent, or hand washing
detergent in your dishwasher.
The appliance needs to be connected to the main water
valve using new hose sets. Old sets should not be reused.
4
This appliance's packaging materials are recyclable.
Dispose of the packaging into a suitable waste
collection container to recycle it.
It is prohibited to dispose of this appliance as
household waste.
Correct Disposal of this product: this symbol on the
product or in its packing indicates that this product
may not be treated as household waste. Instead,
it should be taken to the appropriate waste collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by the inappropriate
waste handling of this product.
For more detailed information about the recycling of
this product, please contact your local council your
household waste disposal service, or the shop where
you purchased the product.
For disposing of package and the appliance please
go to a recycling centre. Therefore cut off the power
supply cable and make the door closing device
unusable.
Cardboard packaging is manufactured from recycled
paper and should be disposed in the waste paper
collection for recycling.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this
product, please contact your local city office and your
household waste disposal service.
DISPOSAL: Do not dispose this product as unsorted
municipal waste. Collection of such waste separately
for special treatment is necessary.
5
For detailed operating method read the corresponding content on the instruction manual.
For each wash cycle.
For programs with pre-wash,please put the detergent anywhere inside the
inner tank except in compartment A
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Turn on the water tap ,close the door . The machine will start working at once.
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (abou t 15 minutes ) before unlo ading the dishwas her to avoid
han dling the dishes and utensils while they are still hot and more s uscep tible to brea k.
The dishes will also dry bett er. Firs t start unloading the lower basket.
Changing the programme
Adding forgotte n dishes
in t he dishwash er.
To load the baskets, ref er to th e sect ion en titled Load ing th e Dish washe r Baskets .
Touc h any progra mme button until the sele cted p rogram me li ghts u p.
( See the section entitled Op eratio n instr uction )
If the appliance is switched
off during a wash cycle.
Open the door care fully.
Look out for hot ste am
when openin g the door!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance Open the door, the On/Off button to switch on the appliance .
touch
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again .
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2.Open the door.
3. for more than 3 seconds to cancel the running programme.
4. Select a new programme.
5. Restart the dishwasher.
Touch any programme button
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
before using it for the first tim e.
To get the best perform ance from your dishwasher, read all operating instructions
7.Program functions, on ly one function can b e selected in
a cycle:
Express, t o reduce the program time.
3.Screen- Show the program time and d elay time;
Eg: program time
Delay time
2. Program Buttons-touch to select the Prog ram,
corresp onding in dicator will be lightened;
Auto
Intensive
Normal
ECO
Glass
90M in
Rapid
4.Status In dic ators :
Faucet is not open
Rinse detergent need to be refilled
Salt need to be refilled
1. Power B utton- touch on and off. 5.Delay Buttons:
6.Alt Function Buttons and indicators:
Increase
Upper basket
Reduce
Lower basket
9
Dispenser
Cup Shelf
Spray arm s
Filter assembly
Inlet pipe connector
Drain pipe
Lower Baske t
Inner pip e
Upper Baske t
1
Salt Container
5
6
7
8
9
10
3
2
4
10
1
2
3
4
5
6
7
8
Front view
Ba ck View
Extra Dryi ng: Fina l rinse temperature increases and
an extend ed dryin g phase is added to impro ve d rying
efficiency. It involves a slight energy consumption in
cr ease.
Strong wash: An increa sed temperature during the main
wash and a ad ditional rising are added to impro ve clean ing
efficiency. This function will involve an energy and water
consumpt ion i ncrease.
The water softener must be set m anually, using the water hardness dial.
The water softener is des igned to rem ove minerals and salts from the water, which woul d have
a detrimental or adverse effect on the operation of the app liance.
The more mi nerals there are, the harder your wate r is
The softener should be adjusted according to the hard ness of the water in your area. Your local Water Authority
can advise you on the hardness o f the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of salt co nsumed bas ed on the ha rdness of
the water used. This is intended to optimise and customise the level o f salt consum ption.
1. Open the door ,Switch on the appliance;
2. Touch the program button for more than 5 seconds to star t the water softener
setting mode within 60seconds after the appliance was switched on(Salt and
Rinse aid warning lights will be on periodically );
3. the progr am button to select the proper set according to ,
4. To end the setting mode, either touch the On/Off button or wait 5 sec onds
Touch
th e setting will change in the following sequence: H1->H2->H3->H4->H5->H6->H1;
Rapid
seeting mode is on
the hardness of you r local waterRapid
WATER SOFTENER
The hardness of the water varies from place to plac e. If hard water is used in the dishwasher, de posits will
form on the dishes and utensils.
The appliance is equipped with a sp ecial softener that uses a salt container specifically designed to eliminate
lime and minera ls from the water.
Contact your local water board for information on the hardness of your water supply.
H1
H2
H3
H4
Please follo w the steps below for adjustment in salt consumption.
7
If your model does not have any water softener, you may skip this section.
H5
H6
The manufactory setting: H3 (EN 50242)
Before using you r dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishw asher salt and then full fill the salt container with w ater
C. Fill the rinse aid dispenser
D. Fill in detergent
Clark: British degree
fH: French degree
dH: German degree
dH=1.25 Clarke=1.78 fH =0.178mmol/l
1
dH
mmol/l
0~90~5 0~0.94 0
10-20
6-11
1.0-2.0 9
21-3012-17 2.1 -3.0 12
20
fH
0~6
7-14
15-21
Clarke
WATER HARDN ESS
Sel ector Position
Salt con sumption
(gram/cycle)
18-22 31-40 22-28 3.1-4.0
41-6023-34 4.1 -6.0 30
60
29-42
35-55 61-98 43-69 6.1-9.8
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2.
I f sal t has spilled, run a soak or qu ick prog ram to remo ve i t.
Always use the salt intended for dishwasher use.
The salt contain er is located beneath the lower basket and should be filled as explained
in the following:
Warning!
Only use salt spe cifically desi gne d for dishwashers use! Every other type of
salt not specifically desig ned for dishwasher use, e specially table salt, will
damage the water softener. In case of damages caused by the use of unsuitable
salt the manufacturer does not give any warranty nor is liable for any damages caused.
Only fil l with salt before runnin g a cycl e.
This will prevent any g rains of salt or salty wate r, which may have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosion.
8
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a s pot and streak free drying.
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any other substances
(e.g. Dishwasher cleaning ag ent, liquid detergent). Th is would damage the app liance.
with water,It is normal for a small amount of wa te r to
come out of the salt container.
Fill the salt cont ai ne r to its maximum li mit
A After the low er basket has been removed, unscrew and remove the cap from the salt container.
B Pl ace the end of the funnel (supplied) into the hole and introduce about 1.5kg of di shwasher salt.
C
D Af ter fil ling the container ,
screw back the cap tightly.
E The sal t warning light will stop being after the sa lt co ntainer has been fill ed with sa lt.
F Immediat ely after filling the salt into the salt container, a washing program should be started
program Other wise the filt er system, pump or other important parts of t he machine may be damaged
by salty water. This is out of warranty.
(We suggest to use a short
).
The rinse aid is released during the final rinse to prevent water from formi ng droplets on your di shes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. Th e rinse aid dispenser is located inside, on the door and next to the detergent
dispenser.
To fill the dispe nser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
9
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Carefully pour in the r inse-aid into its dispenser, whil st avoiding it t o overf lo w.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or fou r settings. Always st art with the dispenser
set on "4". If spot s and poor drying are a problem, increase the amoun t of rinse
aid disp ensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly o r show spots, adjust the dial t o the next
high er lever until your dishes a re sp ot-free. The recom mended setting is "4".
(Factory value is "4".)
Inc rea se th e dose if there are drops of water o r lime spots on the dish es afte r washing.
Reduce i t if there are sticky whitis h stains on your dish es o r a bluish fil m on glassware or
knife blades.
1
2
3
As the rinse aid diminishes, the size o f the black dot
on the rinse aid level indicator changes, as illustra ted below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
Unless the rinse-aid warning light on the control panel is on, you can always estimate the amount from the co lor
of the optical level indicator "C "located nex t to the c ap. When the rinse-aid container is f ull, the indicator
will be fully dark. The size o f the dar k dot de creases as t he rinse-aid diminishes. You sho uld neve r let
the rinse aid level be less than 1/4 full.
during the next wash. Don't forget to re place the cap be fore you close dis hwasher door.
Clean up any rinse aid spil led while during filling with an absorbent cloth to avoid excessive foaming
The chemical ingredients that compose the detergent are necessary to remove, crush and dispense all dirt out of the
di sh was he r. Most of the commercial qualit y detergen ts are suitable for this purpo se.
" "
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser u ntil you're ready to wash dish es.
Warning!
10
Amount of Detergent to Use
Dishwasher detergent is corrosive!
Take care to keep it out of reach of children.
Based on their chemical composition, deterge nts can be split in two basic types:
Dete rgent tablets of different brands disso lve at different speeds. For this reason some
detergent tablets cannot dissolve and develop the ir full cleaning power during short
prog rams. There fore please use long programs when u sin g detergent tablets, to
ensure the complete removal of detergent residuals.
The dispenser m us t be re filled before the start of each wash cycle f ollowing the instructions
provided in the wash cycle table . Your dis hwa sher uses less detergent and rinse aid than
Conventiona l dis hwa sher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Al way s ad d the
detergent just before star ting the dishwasher, otherwise it could get damp and w ill not
dissolve properly.
Concentrated Detergent
Detergent Tablets
Detergent Dispenser
co nventional, alkaline dete rgents w ith caus tic comp onents
low alkalin e co ncentrated detergen ts with natural enzymes
Normally new pulverised detergent is with out phosphate. Thus the water softener function of
phosphate is not given. In this case we recommend to fill salt in the salt con tainer even when
the hardness of water is only 6 dH. If dete rgents w itho ut phosphate are used in the case of hard water
often white spots appear on d ishes and glasses. In this case please add more detergent to r each
better result s. Detergents without chlorine do only bleach a little. S tron g and coloured spots wil l not
be removed completely. In this case please choose a program with a hi gher temperature.
°
Detergents
There are 3 sorts of d etergents
1.With phosphate and with ch lorine
2.With phosphate and without chlorine
3.Withou t phosphate and without chlorine
Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.
If the lid is closed: press release button. T he lid will spring open.
Detergent powder
11
Fill the detergent dispenser w ith detergen t.
The marking indicates the dosing levels , as
Illustrated :on the right
Plea se observe the manufacturers do sing and storage
Recommendations as stated on the detergent packaging.
Close the lid and p ress on it until it locks into place.
If the dishes are heavily soiled, add an additional prewash detergent dose.
This detergent will take effect during the pre-wash phase.
Filling the detergent dispenser
You information about the amount of detergent for the single programme on page 14.
will find
Be aware that dep end ing on the so iling of wate r, se tting ma y be diffe rent.
Please observe the manufa cturer's recommendations on the detergent packaging.
1. Place the main washing cycle deter gent in the storage
compartment i ndicated with an A on the picture.
Th e marking on the compartment indica tes the dosing
level.
2. Place pre-wash detergent cycle detergent anywhere
inside the inner tank
12
Cutlery with wooden, horn china or
mother-of-pearl handles
Plast ic items that are not heat resistant
Older cut lery with glued parts that are not
temperature resistant
Bonded cutler y ite ms or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Some types of glasses can become
dull after a large number of washes
Silver and aluminum parts have a
tendency to discolour during washing
Glazed patterns may fade if machine
washed frequently
Are not suitable
Are of limited suitability
Dishes and items of cu tlery must not lie inside one another, or cover each other.
The upper basket is designed to ho ld more delicate and lighter dishware such as glasses , coffee
and tea cups
Long bladed knives stored in an upright position are a potential haza rd!
Long and/or sharp items o f cutlery such as carving knives must be positi oned
horizonta lly in the upper basket.
Please do not ove rload your dishwasher. T his is important for good results and for
reasonab le consumption of energy.
To avoid damage , glasses should not touch on e an other.
Load lar ge and difficult to clean it ems in the lower basket.
Load hollow items suc h as cups, glasses, pans etc. With the opening facing downwards so that
water can not collect in the container or a deep b ase.
Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a progr am with
To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately
after the programme has ended.
t he lowest possible temperature.
(For best performance of the dishwasher, follow these loading guidelines.
Features and appearance of baske ts and cutlery baskets may vary from your model.)
Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.
It is not necess ary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots /pans, etc. a re faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way t hat the spray arms can rotate freely during washing.
Very sm all items should not be washed in the dishwasher as they could easily fall out of the basket.
To prevent water dripping from the uppe r basket into the lower basket, we recommend that you
empty the lower basket first
, fo llowed by the
upper basket.
13
For better stacking of pots and pans, the spikes can be folded
down as show on the picture below.
The upper basket is designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as plates, sm all bowls
and shallow pans (as l ong as they are not too dirty).
Position the dishe s and co okw are so that they will
not get moved by the spray of wate r.
Pots, serving bowls, etc, must always be placed to p down.
Deep pots should be slan ted to allow water to flow out.
Please be reminded that:
The Botto m Basket features fo lding spikes so that larger or more pots and pans can be loade d.
They do not nest together.
Silverware is placed with the male face up.
Long utensils in the middle.
Cutlery should be placed in the cut lery basket with the handles at the bottom. If the rack has side baskets, the
spoons should be loaded separately into the appropriate slots, utensils should be placed in theEspecially long
Do not let any item extend through the bottom.
Always load sharp utensils with the sharp point down!
The height of th e up per rack can be easi ly ad just ed to
accommodate taller dishes in ei ther the uppe r an d lower
rac k. To rai se the ra ck t o the upper posit ion, lift rack until
both sides are at the same heigh t. The rack will secure
into place. To lo wer the rack , push down on the h andl e
and release.
For better stacki ng o f cups, th e sh elve s can be fold ed
down as show on the picture below.
We suggest that you place large items and the most
difficult to clean items such as
pots, pans, lids, serving dishes and bowls, as shown
in the figure below. It is preferable to place serving
dishes and lids on the side of the racks in order to
avoid blocking the rotation of the top spray arm.
into the lower basket:
For a top quality cleaning, place the silverware in the basket making sure that:
horizontal position at the front of the upper basket.
Means: Rinse-aid dispenser needs to be filled.
( )
*EN 50242 : This programme is the test cycle. The inform ation for comparability test
in acco rdance with EN 50242, as follows:
Capacity: 13 settings
Position Upper ba sket:
Rinse aid setting: 6
PI:0.49w;Po:0.45w
Lower position
Starting a cycle wash
Draw out the lower and upper basket, load the d ishes and push them back.
It is load the l owe r basket first, then the upper o ne (see the section entitled
Loading the Dishwasher ).
Pour in the detergent (see the section entitledSalt, Detergent and Rinse Aid).
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
Open the doo r, touch the power button, and the On/Off light will t urn on.
f a program is selected, the response light will . Then close the door,
recommended to
turn on the dishwasher
will start its cycle.
1
2
3
4
5 Touch an y progra m button, i
5/30g
1or2 pieces
5/30g
1or2 pieces
5/30g
1or2 pieces
For normally soiled loads,
such as pots plates
glass es and lig htly
soiled pans.
For heavi est soil ed crock ery,
and normally soi led pots
pans dishes etc with dried
on soiling.
A shorter wash for lightl y
soiled loads a nd qu ick
was h.
35g
1 piece
25g
5/30g
1 piece
For lightly soi led cr ockery
and glass.
5/30g
1or2 pieces
Auto sensing wash, lightly,
normally or heavily soi led
crockery, with or with out
dried-on food
This is standard progr amm e, it is
suitabl e to clean normally soi led
tableware and it is the m ost eff icient
pr ogramme in terms of its com bined
ener gy and water consumpt ion for
that type of tabl eware.
For normally soiled loads
that need quick wash.
Pre-wash(50 )
Wash (60 )
Rinse
Rinse
Rinse(70 )
Drying
Pre-wash(45 )
Was h (55 )
Rinse
Rinse (65 )
Drying
Pre-wash
Wash (45 )
Rinse(65 )
Drying
Wash (45 )
Rinse
Rinse (55 )
(50 )
185
195
175
30
1.3
0.93
1.6
0. 75
17.5
13. 5
10
11
(65 )
Rinse
Rinse (65 )
Drying
wash
90
12.51.35
130
0.9
13
Pre-wash
Wash (40 )
Rinse
Rinse(60 )
Drying
11~150.9~1.3
150
Pre-wash (45 )
Autowash(45-55 )
Rinse
Rinse(65 )
Drying
Normal
Rapid
Glass
Int ensi ve
( *EN 502 42)
90 Min
15
If you open the door , the machine will pause. The program light will
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working again .
during a wash cycle
Premise:
A can only be modified if it has only been running f or a short time. Otherwise, the
detergent may have already be en released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
Open the door , , the machine will be in standby state,
then yo u can change the program to the desired cycle setting (see the section entitled " Starting a
wash cycle. . ." ).
touch more than 3 seconds
1
2
running cycle
the running program button
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
The dishwasher will start running again.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
When the wo rking cycle has finished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
the appliance using the ON/O FF button, shut off the wa ter supp ly and open the door of the dishwashe r.
Wait for a few minutes before unlo ading the dishwasher to avoid ha ndlin g the dishes and utensils while th ey
are still hot and more suscept ible to break. They wi ll also dry be tter.
Switching Off the Dishwasher
The program light is on but is not blinking,
only in this case has the program ended.
1.Open the door.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
shocks. The dishes should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishwasher to be wet insid e.
The filter prevents larger remnants of food or other obj ects from getting insi de th e pump.
The residues may block the filter, in this case they must be rem oved .
The filter system consists of a coar se filter,a flat (Main f ilter)
And a microfilter(Fine filter).
Fo od and soil particles trap ped in this filter are pulverize d by a
specia l jet on the lower spr ay arm and w ashed down drain.
La rger ite ms, such as p ieces of bones or glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently sque eze the tap on the top of this
filter and lift out.
This filter holds soil and food residues in the sum p area a nd
preve nts
the m fr om b eing red epo site d on the dishes d uring wash cycle.
Main filter
1
Coarse filter
2
Fin e filter
3
2
3
1
Filter assembly
The filter efficiently
For best performance and results, the filter must be cleaned regularly. this reason, it is a good idea to
remove the larger food particles trapp ed in the filter after each was h cycle by rinsing the semicircular filte r and
cup under runnin g water. To remove th e filter device, pull the cup handle in the upward d irection.
remo ves food particle s from the wash water, allowing it to be rec ycle d during the cycl e.
For
The dishw asher m ust never be used without the filters.
Impro per replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
Step 1 Turn the
filter counterclockwis e,
Step 2 lift the filter assy up
When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
16
1
2
17
The control pane l can be clea ned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For t he exter ior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Winterzing
1 .Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remov e the filt er at the bottom of the tub and use a sponge to soak up water in the sump.
please take frost protection measures on the dishwasher in winter. Every fter washing cycles,
please operate as follows
time a
Cleaning the Filter
Cleaning The Door
To clean the coarse filte r and the fine filt er, u se a cleaning brush. Rea ssemble the filte r parts (see page 15) and
rei nsert the m in the dish was her, pos itioning them in their sea t and pressing downwards.
When cleaning the filters, Otherwise, the filters could be
contorted and the perform ance of the dishwasher could be decreased.
do not knock the m.
To cle an the edge around the door, you
To avoid pene tration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.
sh ould only use a soft, ward and damp
cloth.
Never u se a spray cleaner to clean the door panel as it may dam age the door loc k
and electrical components.
Abrasive agents or som e paper towels shou ld not be used becau se of the risk of
scratching or leaving spots on the stainless steel surface.
Cleaning the Spray Arms
If your dishwasher cannot work because of the ice,
please contact professional service persons.
It is necessary to clean the spra y arms re gularly fo r hard
wate r che micals w ill clog the sp ray arm jets and bearings.
- After each cyc le, c heck for any deb ris in the filte r to avoid future b lock age.
- By unscrew ing the coarse filter, you can remove the filter system. Re move any foo d remnants and
clean the filters under running water.
Remarks:
The entire filter assembly should be cleaned once a week.
To remove th e lower spray arm, pull out the spray arm u pwa rd.
To remove the upper spray arm, hold the nut, rotate the arm
clockwise to remove it.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
It is recommend that you run a wash cy cle with the
dishwasher empty an d then remove the plug from the
sock et, turn off the water supply and leave the door of
the appliance slightly open. This w ill help the door
seals to last longer and prevent odours from forming
withi n the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher n the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
is rema ining foo d strapp ed i
Before cleaning or performing maintenance, always
remove the plug from the socket.
To cle an the exterior and rubber parts of the di shw asher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm so apy water.
To remove spots or stains from the surface of t he
interior, use a cloth dampened with water a n a little
vinegar, o r a cleaning pro duct mad e specifically for
dishw ashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off the water supply to the
appliance and leave the door slight ly op en so that
moisture and odours are not trapped inside.
After Every Wash
When not in use for a Timelong
18
Th e installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock electrical power
dishwasher.
Failure to do so can result in death or electrical shock.
Hazard. Disconnect
before installing
The installation position of dishwasher should be ne ar the existing inlet and drain hoses and power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dis hwa sher.
Installation preparation
Note: please che ck the accompanying installation accessories(hook for aesthetic panel, screw)
1 / 1

Brandt DVH1342J Owner's manual

Category
Dishwashers
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document