Page is loading ...
OAK-CDAB-WAL
MAJORITY
OAKINGTON
DAB / DAB+ Compact Music System
Instrucons Guide
Controls And Funcons ���������������������������������������������� 1
What’s In The Box? ��������������������������������������������������� 6
Instrucons Guide �����������������������������������������������������7
Connecvity �������������������������������������������������������������� 7
Basic Operaon �������������������������������������������������������� 9
DAB/DAB+ Radio Funcons ��������������������������������������11
DAB+ Manual Tuning ����������������������������������������������� 14
How to store a preset staon ���������������������������������� 14
FM Radio ������������������������������������������������������������������ 16
CD Playback ������������������������������������������������������������ 20
Bluetooth and Phone Connecon ���������������������������23
Other Funcons �������������������������������������������������������28
Manually Seng the Time ��������������������������������������� 28
Alarm or Timer Seng ������������������������������������������� 30
Troubleshoong ������������������������������������������������������ 32
System Reset ������������������������������������������������������������32
Warranty �����������������������������������������������������������������34
Safety Informaon��������������������������������������������������� 35
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
Contents
YEAR
WARRANTY
1
4
21
5 6 7 8
9 10 11 12
3
Controls And Funcons
Front View / Control Buttons
1. Remote Sensor
2. Display Screen
3. Standby Indicator
4. Disc Port
5. Previous
6. Next
7. Mode
8. Power/Standby
9. Play/Pause/Menu
10. Equaliser
11. Info
12. Pair Bluetooth/Eject
2
Top View
Controls And Funcons
13. Navigate - Rotate to move up or down the menu screen when in
DAB or FM.
OK: Press to skip to subsequent menu in DAB or FM.
Volume +/- Rotate to increase or decrease the volume level.
13
3
Back View
Controls And Funcons
14. 5V 1A Port for charging
Mobile Device
15. Audio Input
16. USB
17. Earphone Jack
18. Power Switch
19. AC Power Connector
20. Antenna
20
14 1615 17 18 19
4
Remote Control
1. ON/STANDBY
2. MODE (CD/USB/Radio/BT)
3. INTRO/AMS (Automatic Music Scan)
Press to scan all tracks in CD or USB
Press to automatically search for a
channel in FM.
Press again to stop search
4. REPEAT for CD and USB
5. EQUALISER – Press to select sound
characteristics: Classical/Pop/Rock/
Jazz/Normal.
6. BASS +/– (need to press User Mode
(Ref.6) rst)
7. USER Mode
8. MENU for DAB/DAB+ and FM
9. PAIR - Press and hold to activate
the Bluetooth pairing function or to
disconnect.
10. PREVIOUS/RE-WIND (hold button
to re-wind)/Fine Tune FM
11. MONO/STEREO
12. P +/- Press to skip to the beginning
of a current/pervious/subsequent
album
Press to select next/preset track in DAB
or FM
Press and hold for manual tuning in FM
13. NUMBER KEYS 0 – 9
14. INFO - Press to turn on/o the
Information on CD or USB
- Press to view information on DAB or FM
Controls And Funcons
8
9
1 15
17
18
19
20
21
25
24
27
29
23
26
28
16
22
2
3
4
6
5
7
8
10
11
12
13
14
9
CD
BT
USB
SLEEP
0
MO
TIMER
V
P
DIM
DAB
INFO
1
2
3
4
5
6
7
AUDIO
REPEAT
RANDOM
Bass
USER
Treble
PROGRAM
MENU
PAIR
DISPLAY
CLOCK
ST
AMS
INTRO
EQ
FM
5
Controls And Funcons
15. EJECT - Press to put disc in or out
16. SLEEP - Press to set the sleep timer
17. AUDIO - Press Audio/CD/USB/DAB/FM/ BT (Bluetooth Connection)
18. RANDOM - Press to play tracks randomly in CD or USB.
19. TREBLE +/– Press to adjust the treble (need to press User Mode (Ref.6) rst)
20. PROGRAM - Press to programme in CD,USB, DAB & FM.
21. DIM - Press to select dierent levels of brightness for the display.
22. ENTER/PLAY/PAUSE/SKIP – Press to play/pause CD/USB/Bluetooth Device
or use to skip to subsequent menu in DAB and FM.
23. FAST–FORWARD/NEXT
24. STOP
25. MUTE/RESUME Sound
26. CLOCK (See page 28)
27. VOLUME +/–
28. TIMER (See page 30)
29. DISPLAY - Press to display the date when in power mode.
NOTE: Remote Control Operating distance of up to 5 Meters and operates using
2 x AAA Batteries.
6
What’s In The Box?
1. Majority Oakington DAB/DAB+ Radio Music System
2. Remote Control
3. Power Adapter
4. Instructions Guide
Box Contents
7
Instrucons Guide
TV
5V 1A AU DIO USB
AC~
5V 1A AU DIO USB
AC~
TV
To connect the Music System/TV outputs to analogue inputs
from the sound board, use the 3.5mm RCA audio cable
(supplied) to connect the Music System/TV outputs with the
AUX (L/R) input socket from the sound board.
Analogue Inputs Connection
Connectivity
8
Instrucons Guide
TV
5V 1A AU DIO USB
AC~
5V 1A AU DIO USB
AC~
TV
Use a line-in audio cable 3.5mm (not supplied) to connect to
the Music System/TV outputs with the AUDIO input socket from
the sound board. You can also connect an external device such
as an MP3 Player, iPod or iPhone.
Analogue Inputs Connection
9
Basic Operation
Instrucons Guide
Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Plug the connector into the back of the system labelled AC-
(Ref.) and the power supply into the mains.
Ensure the antenna (Ref.) is extended as far as possible so that
you can rotate it which will enable you to get the best signal you
can.
Switch the button on the rear of the unit to “On” (Ref.). Press
the ‘Power/Standby’ button to turn on the unit (Ref.). It will
automatically take you to DAB/DAB+ radio mode or the previous
mode you were using.
When DAB Radio is activated for the rst time the display will
show “Full Scan”, press the ‘OK’ button on the unit (Ref.) or the
‘Enter/Play’ button (Ref.) on the remote. The unit will then
scan and store all available stations.
To scroll through the stations use the ‘Previous’ (Ref.) and ‘Next’
buttons (Ref.). Press ‘OK’ (Ref.) to listen to a station.
To change the mode, press the ‘Mode’ button (Ref.) on the unit
to switch between the options. You can also select your option
on the remote (Ref.).
10
Instrucons Guide
Standby
To put the music system in standby, press the ‘Power/Standby’
button (Ref.) or the ‘ON/STANDBY’ button (Ref.) on the
remote.
To turn o fully, switch it o at the mains. The cord must be out
of reach of children.
Language Setting
The default display language is English. You can change to
Deutsch by pressing Menu <Full Scan> will be displayed on the
screen, press ‘Next’ to get <System>, then press ‘Play/Pause’ to
enter. After that, press ‘next’ to get Deutsch, then press ‘Play/
Pause’ to conrm.
11
Press the ‘Mode’ button (Ref.) multiple times on the unit to
switch to DAB/DAB+ Radio. On rst use when DAB Radio is
activated for the rst time the display will show “full scan”, press
the ‘OK’ button on the unit (Ref.) or the ‘enter/play’ button
(Ref.) on the remote.
To select the mode from the remote press the ‘FM/DAB’ button
(Ref.).
Fully extend the antenna (Ref.).
To auto scan, press the ‘Menu’ button (Ref.) on the remote and
use the ‘Next’ (Ref.) and ‘Previous’ buttons (Ref.) to scroll
through options. Select “Full Scan” and press the ‘Enter’ button
(Ref.). This will start scanning up the frequency band and store
all stations that have a good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has nished it will
automatically play the rst station stored.
To listen to all stations that have been stored use the ‘Next’
(Ref.) and ‘Previous’ buttons (Ref.) to scroll through them,
press the ‘Enter’ button (Ref.) when on required station.
The radio will display station information when you press the
‘Info’ button (Ref.) on the remote. Press it multiple times to
view all information. Please see page 26 for further details.
DAB/DAB+ Radio Functions
Instrucons Guide
12
When you turn on the radio again after it switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected. In DAB/DAB+ mode, the radio will synchronize with the
time and date of the station.
Prune
To remove stations that are listed but are unavailable.
Press the ‘Menu’ button (Ref.) on the remote and use the ‘Next’
(Ref.) and ‘Previous’ buttons (Ref.) to scroll through options.
Select “Prune” and press the ‘Enter’ button (Ref.).
Use the ‘Next’ (Ref.) and ‘Previous’ (Ref.) buttons to choose
“Yes/No”. Press the ‘Enter’ button (Ref.) to conrm. The
unavailable station will now be deleted if you chose “Yes”.
Instrucons Guide
13
Dynamic Range Compression (DRC)
This function enables you to reduce the dierence between the
maximum and minimum audio volume being broadcast. This
makes quiet sounds comparatively louder, and loud sounds
comparatively quieter. DRC only works if it enabled by the
broadcaster for a specic station.
Press the ‘Menu’ button (Ref.) on the remote and use the ‘Next’
(Ref.) and ‘Previous’ buttons (Ref.) to scroll through options.
Select “DRC” and press the ‘Enter’ button (Ref.).
Use the ‘Next’ (Ref.) and ‘Previous’ (Ref.) buttons to select
“DRC [o/high/low]”.
Once you have chosen press the ‘Enter’ button (Ref.) to
conrm.
Instrucons Guide
14
Instrucons Guide
DAB+ Manual Tuning
As well as an auto tune function, you can manually tune the
receiver. This can help you when aligning your aerial or when
adding stations that were missed while auto tuning.
Press the ‘Menu’ button (Ref.) on the remote and use the ‘Next’
(Ref.) and ‘Previous’ buttons (Ref.) to scroll through options.
Select “Manual Tune” and press the ‘Enter’ button (Ref.).
Use the ‘Next’ (Ref.) and ‘Previous’ (Ref.) buttons to cycle
through the DAB+ channels, which are from 5A to 13F.
How to store a preset station
Up to 40 stations can be set. To store a station that you are
currently playing:
Press and hold ‘Program’ button (Ref.) on the remote for 3 to 5
seconds. “<1: (Empty)” will show on the display.
Press ‘Previous’ button (Ref.) or ‘Next’ (Ref.) to change the
“<1” to the number you want to store the station as. Then press
‘Enter’ button (Ref.) on the remote to save. The display will
then show “Preset [1] stored”.
15
Instrucons Guide
How to play a preset radio station
Up to 40 stations can be set. To store a station that you are
currently Press the ‘Program’ button (Ref.) on the remote.
Press ‘Previous’ button (Ref.) or ‘Next’ (Ref.) to scroll through
your preset stations, up to 40.
Press the ‘Enter’ button (Ref.) to select your choice.
16
Press the ‘Mode’ button (Ref.) multiple times on the unit and
choose “FM” or press the ‘FM/DAB’ button (Ref.) on the remote.
The rst time you do this, the FM frequency “87.5 MHz” will be
displayed on the screen.
Fully extend the antenna (Ref.).
To auto scan, press and release the *‘AMS’ button (Ref.) on the
remote. This will then start scanning up the frequency band and
play the rst station it nds with good signal.
The radio will display station information when you press the
‘Info’ button (Ref.) on the remote, press multiple times to view
all information. Please see page 27 for further details.
*Automatic Music Scan
FM Radio
Instrucons Guide
17
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the stations with strong signal (Only).
Press the ‘Menu’ button (Ref.) on the remote. To make your
choice, use the ‘Previous/Next’ buttons (Ref./23) to choose
your option.
Select “FM Scan Setting” and press the ‘Enter’ button (Ref.).
Press the ‘Previous’ (Ref.) or ‘Next’ (Ref.) button to choose
between “Strong stations only” or “All Stations”, press the ‘Enter’
button (Ref.) to conrm your choice.
To tune a specic frequency manually
To listen to a specic frequency press and hold ‘Next’ (Ref.) on
the remote to search forward quickly and ‘Previous’ (Ref.) to
search back quickly. It will stop
searching when the button is released. To search slowly press
the ‘Next’ (Ref.) or ‘Previous’ button (Ref.) on the remote
multiple times rather than holding.
Instrucons Guide
18
Audio Settings Mono or Stereo
All stereo stations are reproduced in stereo. For weak stations
this can result in poor audio quality. The audio quality can be
improved using mono.
Press the ‘Menu’ button (Ref.) on the remote. To make your
choice, use the ‘Previous/Next’ buttons (Ref./23) to choose
your option.
Choose “Audio Setting” and press the ‘Enter’ button (Ref.).
Press the ‘Previous’ (Ref.) or ‘Next’ (Ref.) buttons to choose
between “Stereo allowed” or “Forced mono”, press the ‘Enter’
button (Ref.) to conrm your choice.
How to store a preset station
Up to 40 stations can be set. To store a station that you are
currently playing:
Press and hold ‘Program’ button (Ref.) on the remote for 3 to 5
seconds. “<1: [Empty]” will show on the display.
Press ‘Previous’ button (Ref.) or ‘Next’ (Ref.) to change the
“<1” to the number you want to store the station as. Then press
‘Enter’ button (Ref.) on the remote to save. The display will
then show “Preset [1] stored”.
Instrucons Guide
/
