Casio EX-830 User manual

SERVICE MANUAL

QT-6600

ELECTRONIC CASH REGISTER

QT-6600

(EX-830)

NOV. 2008

CONTENTS

QT-6600 PAGE

1. SPECIFICATIONS ...................................................................................1

2. MACHINE INITIALIZATION .....................................................................5

3. DISASSEMBLY .....................................................................................10

4. ASSEMBLY ...........................................................................................24

5. OPTION INSTALLATION ......................................................................36

6. INLINE / ONLINE ...................................................................................38

7. DIAGNOSTIC OPERATION ..................................................................40

8. CIRCUIT EXPLANATION ......................................................................81

9. ERROR CODE LIST ..............................................................................84

10. PCB LAYOUT ........................................................................................95

11. CIRCUIT DIAGRAM ..............................................................................99

12. PARTS LIST ........................................................................................119

To prevent malfunctions caused by the weak batteries, charge the memory

protection batteries for over 12-hours before installation or after a long-time

vacation (over 30 days).

•

Before installation, initialize the terminal and leave it turn on over 12-hours.

•

After a long-time vacation, initialize the terminal and restore the program

data if the terminal is in malfunction, and leave it turn on over 12-hours.

•

Over 48-hours charging makes the batteries fully charged.

— 1 —

1. SPECIFICATIONS

1-1. Electrical Speciﬁcations

100V 120V 220V 230V 240V

• Power consumption <AC input current at Adaptor>

In operation Max. 1.5A 1.5A 1.5A 1.5A

Display off Max. 0.25A 0.25A 0.25A 0.25A

In operation Max. 1.3A 1.3A 1.3A 1.3A

Display off Max. 0.5A 0.5A 0.5A 0.5A

• Memory protection Back-up battery

Battery life

Recharge time

NiMH (nickel-metal-hydride)

HHR-21HL3G1B (USA only)

HHR-21HL3G1C (Except USA)

Replace the battery every 1 year.

6 hours (full charge)

• Clock & Calendar Accuracy

Auto calendar

Within ± 40 sec. Per month (25 °C)

Effective until 2099 A.D.

• Clock protection Back-up battery

Battery

Recharge time

Manganese dioxide lithium

CR2032/1HF1

Replace the battery every 1 year.

1-2. Environmental speciﬁcations

• Operating temperature 0 °C ~ 40 °C

• Operating humidity 20 % ~ 85 %

• Storage temperature -20 °C ~ 65 °C

• Storage humidity 10 % ~ 85 %

1-3. Main LSI speciﬁcations

• CPU Name

Number of control bit

R5S77631AY266BGV

32 bits

• I/O controller Name

Number of control bit

UPD70F3728GC-8BT-A

16 bits

• Gate array Name UPD65945GJP16-JEUA

• DDR SDRAM Name

Capacity

HYB25DC256163CE-5

256 Mbits

SDRAM Name

Capacity

MT48LC4M16A2P-75:G

64 Mbits

• Flash ROM (Back up) Name

Capacity

S29GL256P90TFCR20

256 Mbits

• Flash ROM (Program) Name

Capacity

S29GL256P90TFCR2A*

256 Mbits

• Display controller Name MB86276PB-G-ZE1

• Ethernet controller Name LAN9115-MT (10/100BASE)

— 2 —

1-4. Devices speciﬁcations

• LCD Display Name

Screen size

Resolution

Interface

Display color

Pixel pitch

Luminance

Contrast ratio

Power supply voltage

Back light

NL10276BC30-32D

15.0 inch (38cm diagonal)

1024(H) x 768(V) pixels

LVDS (RGB 8 bits each)

16.77 M colors

0.297(H) x 0.297(V) mm

250 cd/m

2

500:1

3.3 V

Top and bottom, 1 CCFL each

• Touch Panel Name

Size

N010-0527-T841

15 inch

• Panel brightness control 1 x VR controller

• Power supply External adaptor "SO1330A"

• Cleck key Magnetic ibutton prove "94-J-04"

1-5. I/O Ports

The following optional peripherals can be used by plugging them into the appropriate port.

RS-232C COM 1 port For MODEM, PC direct connection or Order man

RS-232C COM 2 port For Hand held scanner, Slip printer or Scale

RS-232C COM 3 port For Remote customer display or Scale

RS-232C COM 4 port For Remote printer, Slip printer or Scale

RS-232C COM 5 port For Remote printer or Scale

RS-232C COM 6 port For Remote printer or Scale

Inline port. Ethernet

Drawer port x 2 Drawer

CF card slot

(in the card slot cover)

CF card

PS-2 keyboard port PS-2 keyboard (Microsoft Wired Keyboard 500)

DISPLAY

SCANNER

PC/MODEM

COM3

COM6

COM2

COM5

COM1

COM4

SPK

PS/2

KEYBOARD

MIC

LAN

Brightness

COM3 COM6

COM2

COM5

COM1 COM4

Inline (10/100Base-T)

PS/2 Keyboard

AC Adaptor

Drawer 2

Drawer 1

Ext. microphone

Ext. speaker

Bottom side of the terminal

— 3 —

1-6. Option List

CASIO sales options

DEVICE NAME MODEL NOTE

• Magnet i-Button QT-6011DLS

• Display set for customer QT-6060D Connect to Com 3

• Display cable for customer

(for mounting to the base)

QT-6061CB

• Display 5-meter cable for customer QT-6062CB

• Slip printer SP-1300 Connect to Com 2

• Slip printer cable PRT-CB-8C Length 1.5m

• Remote printer UP-400 Connect to Com 4 ~ 6

• Remote printer UP-360BB Connect to Com 4 ~ 6

• Printer cable PRT-CB-8A Length 3m

• Printer cable PRT-CB-8B Length 5m

• MCR QT-6046MCR

• Drawer extension cable MDL-11

• PC cable PRL-CB-2 Com1 port only

Local purchase options

DEVICE NAME MAKER MODEL NOTE

• Remote printer EPSON TM-T88 IV (Mark 4) Connect to Com 4 ~ 6

• Remote printer EPSON TM-U220 Connect to Com 4 ~ 6

• Remote printer EPSON TM-U230 Connect to Com 4 ~ 6

• Remote printer EPSON TM-J7100 Connect to Com 4 ~ 6

• Remote printer EPSON TM-T88 lll Connect to Com 4 ~ 6

• Printer AC adaptor EPSON PS-180

• Slip printer/AC adaptor Citizen AD31-U or E

(For SP-1300)

U: 100V / E: 200V

• Power cord for power unit EPSON AC-170

• Laser scanner PSC PSC QuickScan6500 Connect to Com 2

• Laser scanner Metrologic Metrologic MS9544 Voyager Connect to Com 2

• Fixation scanner Metrologic Metrologic MS7120 Orbit Connect to Com 2

• Scanner Scale PSC PSC Megellan 8100 Connect to Com 2

• Modem U.S.Robotics 56k V.92 (RS232C) Connect to Com 1

• Modem D-Link DFM-560EL (RS232C) Connect to Com 1

• Orderman Orderman Orderman Don/Max2/

Access Point

• External speaker ELECOM MS-76CH

• External microphone ELECOM MS-STM55

• Conversion plug OHM

ELECTRIC

AP-2633

• CF Memory card Sandisk 1GB (Ultra II),

2/4/8GB (Extreme III)

• PS2 keyboard Microsoft Microsoft Wired Keyboard 500

• HUB NETGEAR FS-108

• HUB NETGEAR GS-108

• Ketchen alarm HERALD Kitchen Alarm System

• Video surveillance VHC2-VIDQT6

— 4 —

1-7. Drawer

Type Drawer Name Speciﬁcation USA/Canada Other Countries

M DL-2808 D-24BC-B84M-4 X

M DL-2809 D-24BC-B84-SM-4 X

M DL-2434 D-24BC-B55SM-4 X

M DL-2810 D-24BC-A84SM-4 X

L DL-3622 D-11BH-B65SS-4 X

L DL-3623 D-11BH-B65-4 X

1-8. Duration of Life

TFT LCD (Main) 30,000 hours

STN LCD (Rear) 20,000 hours

Touch Panel (number of touch times) one million times

Battery 1 year

AC adaptor 5 year

■

Installing Precautions

When installing QT-6600, attach the ferrite core to the QT-6600 side. Wind the

AC adaptor cable around the ferrite core two times.

The ferrite core is packed with QT-6600.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS

— 5 —

CASIO COMPUTER CO.,LTD.

ROM VER. xxxxxx xxxx

CREATE xxxx-xx-xx xx:xx

QT-6600 x.xx

APL VER. xxxxxx xxxx

Version

INIT

C

7 8 9

4 5 6

1 2 3

0

OK

2. MACHINE INITIALIZATION

2-1. How to initialize the terminal

Preparation:

1. All peripheral devices and terminals of this cluster should be turned off.

2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.

3. Connect all terminals by inline.

Operation:

4. Turn on all peripheral devices of a terminal.

5. Turn on this terminal with pressing the initialize switch and release after beep sound.

6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000” (other area:

German), “50000” (other area: French), “60000” (other area: Spanish) and press the <OK> key.

Enter terminal ID and IP address

Init Sw

ID & I P ADD R ESS

Ter m inal ID

ENTER ID

IP ADDRESS

AUTO

FTP Server

OK?

———

Terminal ID: 0,1 ~ 32

———

Press <YES> to continue.

Yes

— 6 —

• Case 1: If your system has no LAN device = “0”

OK?

———

Press <YES> to continue.

Yes

• Case 2: Terminal ID = “1”

——— Press <YES> to continue.

———

Select <YES>, if you want to use this terminal as an FTP server.

———

Select “CLIENT”, if you want to use this terminal as a DHCP client.

——— Enter IP address if you want to change.

IP AD D R E SS

FTP S e r v er

DHCP SERVE R

192. 1 6 8 . 0.

1

MANUA L

OK?

Yes

* The IP address of each terminal should be the unique number from 192.168. 0. 1 to

192.168.255.255.

• Case 3: Terminal ID = “2” ~ “32”

——— Press <YES> to continue.

———

Select “MANUAL”, if you want to enter IP address manually.

(IP address setting line will appear on the screen.)

IP AD D R E S S AUTO

OK? Yes

Declare terminal conﬁguration

——— Enter cluster No. “1” ~ “9”, if using check cluster system.

——— Select the appropriate printer.

——— Press <YES> to continue.

———

Master / Backup master / Satellite / Self master

———

Enter time if it is wrong.

———

Within 12 characters

——— Enter date if it is wrong.

OK?

Slip P r i nter

No

R/J/O r d e r Printer3

No

R/J/O r d e r Printer2

No

R/J/O r d e r Printer1

No

Check C l uster ID

0

Check S y stem

Maste r

ID C h a r a cter

MC #0 1

Time

12:34 0 0

Date

01-10 - 1 0

YES

— 7 —

Program restoration

INIT 10 - 1 0 - 0 1 12:34 00 0 0 0 1

AUTO PG

M

1.No Re s t o r e / Receive

2.PGM R e s t o r e (CF Card)

3.PGM R e c e i v e (Inline)

———

Select, if no need to download any data.

———

Select to download a program data from CF card.

———

Select to download a program data from other terminal.

• Restore from CF card.

Insert the CF card into the slot and select the appropriate ﬁle and press the <YES> key.

• Program receive from other terminal.

INIT 10-1 0 - 0 1 12:34 000 0 0 1

Receive Data

PGM Receive from

OK

?

All PG

M

MC #05

YES

——— All Data (including totalizer) / All PGM (program only)

——— Select the machine to send the data.

2-2. How to initialize the terminal (add / replace one terminal)

Preparation:

1. All peripheral devices and terminals of this cluster should be turned off.

2. Connect all of the peripheral devices (such as printer, display etc.) to this terminal.

3. Connect the added / replaced terminal to inline.

Operation:

Follow the steps shown on the page 5 to 7.

— 8 —

2-3. How to ﬂag clear the terminal (or INIT2)

Preparation:

1. All peripheral devices and this terminal should be turned off.

2. Check the connection of all peripheral devices (such as printer, display etc.) of this terminal.

3. Check the connection of this terminal to inline.

Operation:

4. Turn on all peripheral devices of this terminal.

5. Turn on this terminal with pressing the <DISP ON/OFF> key.

6. Press <OK> key.

FC

OK

CASIO COMPUTER CO.,LTD.

ROM VER. xxxxxx xxxx

CREATE xxxx-xx-xx xx:xx

QT-6600 x.xx

APL VER. xxxxxx xxxx

Version

7. Select “1. Flag Clear” and press <YES> key to ﬂag clear.

or select “2.Init2” and press <YES> key and enter “8888888888” and <YES> key to Init 2.

2-4. IPL (Initial Program Loading)

IPL should be made before initializing when the application software has been modiﬁed.

2-4-1. IPL

IPL via CF card or COM1 port

Initial program loading process is as follows: IPL code = 44449999

Start

Continue

to INIT

ROM check

Store the receiving

data to Flash

— 9 —

IPL via LAN port

Start

END

Restore

all data

IPL from

CF card

Store IPL data

to CF card

Backup all data

to CF card

Clear IPL data

in the CF card

Insert more than

128MB CF card

2-4-2. System conﬁguration before IPL operation

Connect source terminal (cash register terminal) and target terminals or insert the IPL CF card to the

terminal.

CF card

IPL source

IPL target

IPL Data

CF card slot is located

on the leftside of the terminal.

IPL source

LAN port

defined as FTP server

IPL target

IPL Data

2-4-3. IPL operation

Insert the CF card into the slot before this step.

1. Press the <START> key to proceed, in case of downloading

via inline, automatic ID deﬁnition is made by this timing. So

press the <YES> key terminal by terminal.

2. After ﬁnishing IPL, machine initialization is necessary.

xxxxxxx

CANCEL

START

— 10 —

3. DISASSEMBLY

NOTE:

* Please make a back-up copy of the clients’ data before disassembling.

* When the power is turned off, the internal battery enables the hibernate function.

* There are several kinds of screws. Be sure to use the

correct type of screws when reassembling.

It is advisable to sort the screws as shown in the right

after removing them.

* When assembling/disassembling the Stand, be careful not to get the ﬁngers caught.

* Use caution when handling the LCD unit and the inverter for the backlight as there is the risk of

high-voltage electrical shock.

* Internal battery:

• Do not disassemble or short-circuit the battery.

• Do not place the battery near a heat source or expose it to direct ﬂame or heat.

• Place the battery with its (+) and (-) terminals in the correct orientation.

• Do not recharge the battery. (Primary battery)

* When assembling, be sure that it is free of dust and other foreign matters.

Pay special attention when replacing the touch panel and LCD

* Do not tangle the cables in principle.

— 11 —

■

Disassembling

See the ﬂowchart below for the order of disassembling main parts.

A.

Removing the Stand

B.Removing the B-case Assy Block

C.Removing the Rear Display Block

D.Disassembling the Rear Display

E.Removing the Mic PCB (E830-MIC)

F.Removing the LED PCB (E830-E6)

G.Removing the Inverter Unit

H.Removing the Touch Panel PCB (E830-TP)

I.

Removing the Power Supply PCB (E830-INLET)

J.Removing the COM PCB (E830-COM)

K.Removing the Main PCB (E830-1)

L.Removing the MCR

M.Removing the LCD/Touch Panel

— 12 —

A. Disengage and remove the Main Unit from the Stand.

B. Removing the B-case Assy Block

B-1. Remove three screws.

Screws (S4)

B-2. Remove two covers.

HNG COVER

CONNECTOR COVER

— 13 —

B-3. Remove 12 screws.

B-4. Remove the B-case Assy Block.

B-5. Unplug the connector to the speaker.

Screws (S1)

Screws (S2)

Screws (S3)

B-CASE ASSY BLOCK

Connector (Speaker)

— 14 —

C. Removing the Rear Display Block

C-1. Remove eight screws.

C-2. Remove the connector to the battery.

Connector (Battery)

Screws (S6)

C-3. Remove the Rear Display Block.

C-4. Unplug the connector to the Rear Display.

Connector (REAR DISPLAY)

REAR DISPLAY BLOCK

— 15 —

D. Disassembling the Rear Display

D-1. Remove the screw and remove the Rear Display Unit.

Screws (S5)

D-2. Remove two screws and remove the LCD Frame.

Screws (S7)

D-3. Use a solder to remove six lead wires.

D-4. Release the connector lock and disconnect the FPC.

D-5. Remove the Rear LCD PCB (E830-E22).

Black

White

Green

White

Black

— 16 —

Mic PCB (E830-MIC)

COM PCB (E830-COM)

LED PCB (E830-E6)

LCD

i-Button key

MCR

Touch panel PCB(E830-TP)

Inverter unit

Power switch/code

Drawer 2

Drawer 1

■

PCBs and the Connectors to the Main PCB

LED PCB

(E830-E6)

Power supply PCB

(E830-INLET)

Inverter unit

Touch panel PCB

(E830-TP)

Main PCB

(E830-1)

COM PCB

(E830-COM)

Mic PCB

(E830-MIC)

■

PCBs and the Connectors to the Main PCB

— 17 —

E. Removing the Mic PCB (E830-MIC)

E-1. Unplug the connector.

E-2. Remove two screws and remove the Mic PCB (E830-MIC).

F. Removing the LED PCB (E830-E6)

F-1. Unplug the connector.

F-2. Remove the screw and remove the LED PCB (E830-E6).

G. Removing the Inverter Unit

G-1. Unplug three connectors.

G-2. Remove two screws and remove the Inverter Unit.

Screws (S7)

Screws (S5)

— 18 —

H. Removing the Touch Panel PCB (E830-TP)

H-1.Unplug the connector.

H-2. Release the connector lock and disconnect the FPC.

H-3. Remove two screws and remove the Touch Panel PCB (E830-TP).

I. Removing the Power Supply PCB (E830-INLET)

I-1. Unplug the connector.

I-2. Remove two screws and remove the Power Supply PCB (E830-INLET).

J. Removing COM PCB (E830-COM)

J-1. Unplug two connectors and 1 FPC.

J-2. Remove six nuts and remove the COM PCB (E830-COM).

Screws (S5)

Page is loading ...

Casio EX-830 User manual

This manual is also suitable for

Casio EX-830 User manual

Related papers

Other documents