Extron TLP Pro 1520MG Template

Brand: Extron

Model: TLP Pro 1520MG

Type: Template

Cut-Out Template for the Extron

TLP Pro 1520MG

0.685"

(1.52 cm)

0.685"

(1.52 cm)

1. Confirm the product to be installed.

. Before printing, check the print settings

and make sure the p

age is not scaled.

. Remove the surface cut-out area (gray)

rom the template. (Keep these instructions.)

. Measure the cut-out and template.

. Mark the position on the mounting surface

where the

TLP Pr

o 1520MG is being installed.

. Check dimensions and position, then cut

the opening.

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

SURFACE

CUT-OUT

AREA

Outer Edge of Front Bezel

(Do not cut this line.)

P/N 68-2738-01

Rev. A

Mounting Holes (4)

6.65"

(16.89 cm)

9.63" (24.46 cm)

7.25"

(18.42 cm)

11.00" (27.94 cm)

0.68"

(1.73 cm)

0.08"

(0.20 cm)

Take into account that the

bottom edge of the touchpanel

is below the bottom of this page.

The sides of the touchpanel

are 11.02 inches (27.99 cm).

Extron TLP Pro 1520MG Template

Extron TLP Pro 1520MG Template

Extron TLP Pro 1520MG Template

Related papers

Other documents