AguaStella AS3018MB Black Stainless Steel Undermount Kitchen Sink 30 Inches Single Bowl Installation guide

Brand
AguaStella
Model
AS3018MB Black Stainless Steel Undermount Kitchen Sink 30 Inches Single Bowl
Type
Installation guide
Model: AS3018/AS3018RS/AS3018BS
Unpack and inspect your sink upon delivery to avoid costly contractor delays
Product Features
• High quality 18 gauge T304 stainless steel
• Outer Dimensions: 30 (length) x 18 (width) x 10 inch (depth)
• Sound Insulaon: Rubber dampening pads and an-condensaon coang
• R10 round corner for cleaning easily; X channel grooves for draining water quickly
• Accessories Included: Basket strainer, grid protector, roll-up dish drying rack and all mounng hardware
This sink is intended only for undermount installaons of
solid-surface composite or natural stone countertops.
It is highly recommended that this sink should be installed by professionals.
Installaon Instrucon for Undermount Sink
30"
28"
16"18"
R10
3.5" Dia
10"
R10
Sink Dimensions
Installaon
Official Site: www.aguastellausa.com
Email: aguast[email protected]
Amazon Store: www.amazon.com/shops/aguastellausa
No.
Qty
Description
Kitchen Sink
Undermount Clips
Cutout Template
Picture
Step 1: Countertop Cutout
Cutout the perimeter of the template.
Step 2: Align the Nut Holes as Shown Below
Hole Size : 10mm with depth 15mm
B1
B2
B3
B
B1
Apply the silicon
B2
B3
Cutout Size: 714 x 409mm
Step 3: Install the Nuts
Step 4: Install the Kitchen Sink
  • Page 1 1
  • Page 2 2

AguaStella AS3018MB Black Stainless Steel Undermount Kitchen Sink 30 Inches Single Bowl Installation guide

Brand
AguaStella
Model
AS3018MB Black Stainless Steel Undermount Kitchen Sink 30 Inches Single Bowl
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents