GROTIC . User manual

Brand
GROTIC
Model
.
Category
Drive recorders
Type
User manual
Yo u r t r u s t e d c o m p a n i o n o n t h e r o a d
U s e r M a n u a l
1.Introduction and overview
2.Appearance and layout
3.Functions
4.Installation guide
5.Appearance and layout
6.Memory card requirement
7.FAQ
8.Notification
9.Disposal of your dashcam
Catelog
2
3
4
1 6
1 8
1 9
2 0
2 1
2 2
1
Thanks for choosing our product. This user manual
is designed to help you get familiar with our product
as soon as possible. Feel free to contact us via
Amazon for remote assistance. The user manual will
be updated according to customers’ feedback.
Accessories within package
1. Front camera with 4 Inches display screen 2. Rear
camera with connection cables
3. Power cord
4.Mounting bracket
5. User manual
1.Overview
2
13
7 8
1
2
3
4
5
6
9
1110
12
1. MODE button 2. Up button 3. OK button
4. DOWN button 5. MENU button 6. Display screen
10.Reset button. 11. Fill light 12. 8 Infrared lights
7. Rear camera interface 8. USB interface
9.Mounting bracket interface
13. Memory card slot
2.Appearance and layout
3
3. Functions
1. MODE button functions.
1>. In sleeping (idle) mode, short press MODE
button to switch between different modes including
recording, photography and file browsing mode. The
default mode is recording mode. Short press MODE
button twice to enter file browsing mode, in which
you can select proper image or video file to display.
recording mode
,photography mode
4
file browsing mode
DOW N
DOW N
DOW N
5
Resolution
Dual Camera
Cyclic Record
Interval Record
High Dynamic Range
Exposure
Motion Detection
Recording
Date Stamp
Gravity sensing
Parking Guard
Car Number
Video setting
2>. In recording mode, short press MODE button to
instant lock the current clip which won’t be erased
later.
video locked
DOW N
6
Resolution
1080FHD
720P
VGA
Dual Camera
On
Off
1.resolution:
Higher resolution means more detail of image or video.
Higher resolution cost more memory card space.
Steps: 1>.Press menu button during standby mode
(idle, sleeping mode)
2>. Select resolution option by pressing up/down
button.
3>. Press Ok button to enter resolution setting menu.
4>. Select proper resolution by pressing up/down button
and press ok button to confirm.
2.Dual Camera:
Turn on front and rear cameras. Or only turn on the
front camera.
Steps:1>.Press menu button during standby mode
2>. Select resolution option by pressing up/down
button.
3>. Press Ok button to enter dual camera setting
menu.
4>. Select on/off by pressing up/down button and
press ok button to confirm.
7
Cyclic Record
Off
3 Minute
1 Minute
5 Minutes
3. Cyclic record:
Loop recording is the process of recording audio and
video continuously, which is done by replacing the
oldest clip with the most recent clip. The clip will be
locked automatically when collision is detected. You
may select the time duration of each clip. We don’t
recommend you to turn off the cyclic recording.
Steps:1>: Press menu button during standby mode
2>. Select cyclic record option by pressing up/down
button.
3>. Press Ok button to enter cyclic record setting
menu.
4>. Select proper option by pressing up/down button
and press ok button to confirm.
4. Interval record:
Set up the time interval between two frames. The
longer the time interval, the longer video will be saved
in limited memory card space. But the recorded video
may seemed laggy. The interval record function is
disabled by default.
Steps:1> .Press menu button during standby mode
2> . Select interval record option by pressing up/down
button.
3> . Press Ok button to enter interval record setting
menu.
4> . Select on/off by pressing up/down button and
press ok button to confirm.
8
5.High dynamic range
HDR will improve the gradual change of lightning and
darkness. But it will cost more memory. Thus HDR is
disable by default.
Steps.1>.Press menu button during standby mode
2>. Select high dynamic range option by pressing
up/down button.
3>. Press Ok button to enter high dynamic range
setting menu.
4> Select on/off by pressing up/down button and press
ok button to confirm.
9
Motion Detection
On
Off
7.Motiondetection:
Amotiondetectorisadevicethatdetectsmovingobjects,
particularlypeople.Whenit’striggered,recordedvideo
willbesavedautomatically.Butitwillnotlockthe
correspondingvideoclip.
Steps1>Pressmenubuttonduringstandbymode
2>.Selectmotiondetectionoptionbypressingup/down
button.
3>.PressOkbuttontoentermotiondetectionsettingmenu.
4Selectproperoptionpressingup/downbuttonandpress
okbuttontoconfirm.
6.Exposure:
It is referring to how to control the lightness and the darkness
of the image or video. The default exposure setting is
designed for general daylight user case. You may need to
adjust proper exposure during the night.
Steps 1>. Press menu button during standby mode
2>. Select exposure option by pressing up/down button.
3>. Press Ok button to enter exposure setting menu
4>. Select proper option pressing up/down button and press
ok button to confirm.
10
Recording
On
Off
Date Stamp
On
Off
9.Datestamp:
Encodedateandtimetotherecordedvideoforthe
documentation.
Steps1>.Pressmenubuttonduringstandbymode
2>.Selectdatestampoptionbypressingup/downbutton.
3>.PressOkbuttontoentergravitysensingsettingmenu.
4>Selectproperoptionpressingup/downbuttonand
pressokbuttontoconfirm.
8.Recording
The product has an integrated audio recorder.
Steps 1>.Press menu button during standby mode
2>. Select recording option by pressing up/down button.
3>. Press Ok button to enter recording setting menu.
4>. Select proper option pressing up/down button and
press ok button to confirm.
11
Gravity sensing
Off
Medium
Low
High
10.Gravity sensing
G-sensor in a dash cam will monitor the proper
acceleration, aka G-Force.In other words, the dash
camera will detect a sudden change in direction. This
could be caused by hard braking, impact from
crashing. When a dash camera detects this change in
direction it will automatically save the current segment
of footage in a protected section of memory.
Steps:1>: Press menu button during standby mode
2>. Select gravity sensing option by pressing up/down
button.
3>. Press Ok button to enter gravity sensing setting
menu.
4> Select proper level of sensibility by pressing
up/down button and press ok button to confirm.
12
11.Parking Guard:
When the car engine is down, the camera can still
activate itself with parking guard function. When collision
is detected, the dash camera can start and record 20
seconds footage automatically.
Step:1>. Press menu button during standby mode
2>. Select parking guard option by pressing up/down
button.
3>. Press Ok button to enter cyclic record setting menu.
4> Select proper option by pressing up/down button and
press ok button to confirm.
Parking Guard
On
Off
12.Car number
Encode your car number to the video.
13
14
2.UP button functions: 键
1>.Insettings,moveuptonextoption
2>.Inplaybackmode,shortpressUPbuttonto
rewind.
3>.Switchbetweendifferentcameras.Inrecording
mode,pressUPbuttontoswitchbetweendifferent
camera’sviewonthedisplayscreen.Forexample,
frontcamera,rearcameraorpictureinpicture.
3.OK button functions:
1>.Turn on/Turn off the dash camera.Long press OK
button for around 2 seconds
2>. Confirm selection.Short press OK button after
selecting proper menu settings.
3>. Open files.Short press OK button to play
recorded file or image in file browsing mode.
4>.Enable/Disable recording function.Short press
OK button in recording mode.
5>. Photograph functionShort press OK button to
take a photo in photography mode.
15
4. DOWN button functions
1>. In settings, move down to next option.
2>. In playback mode, short press DOWN button to
fastforward.
3> . In recording mode, short press DOWN button to
turn on/ turn off audio recording. (The microphone
icon shown in the picture means audio recording
function is enabled. ）
4>. In recording mode or sleeping mode, long press
DOWN button to turn on/turn off parking monitor.
recording
mode
DOW N
16
4.Installationguide
1. Shut down the engine of vehicle.
2.Insert memory card into the slot.
3.Attach the dash camera to the proper area of
windscreen.
4.Connect the dash camera to the car charger using
power adapter for power supply. Make sure every
interface is proper connected.
5. Attach the rear camera to the proper area of the
car. The recommended layout of cable is shown in
the picture. Make sure every interface is proper
connected.
6. Double check the position of dash camera.
7. The dash camera will start running automatically
as you start the engine of vehicle.
17
18
5.Appearance and layout
Chipset
Front camera resolution
Rear camera resolution
Viewing angle
Front camera 170 degrees
Rear camera 140 degrees
Video resolution
Photo resolution
Display screen
Video compression method
Picture format
Video format
Storage temperature
Operating humidity
Operating temperature
Memory card capacity
From 8GB to 32 GB
Operating voltage
4 inches IPS
AC5601
1280x1080
640x480
1280x1080
1280x1080
H.264
MP4
JPG
-20°C~70°C
-15°C~50°C
15~65%RH
DC5V
-4°F~158°F
5°F~122°F
19
Memory card requirement and recommendation (not
included in package). The memory card is the
biggest point of failure with dash cams.System
requirement:Class 10 or higher MicroSD or TF
memory card, which means 10GB/second writing
speed.Minimal supported memory
capacity:8GBMaximal supported memory
capacity:32GB (Recommended for longer video
length)High endurance MLC memory card will
provide better durability for loop recordingSanDisk
Ultra should be avoided due to unreliability.Please
check your memory card’s warranty, especially for
used memory card.Please format the brand new
memory card before using.
6.Memory card requirement
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

GROTIC . User manual

Brand
GROTIC
Model
.
Category
Drive recorders
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents