Quick Start Guide
ZV427FX4
ZV427FX4 A
Printed in China
E9P8DUD / E9P8DUH / E9P8EUH
1VMN33215 ★★★★★
Connecting to an
External Tuner
1.
Select
2.
Connect
3.
Prepare
4.
Record
(DVD)
5.
After all the connections are complete,
connect the AC power cord.
1
2
4
5
3
Insert two Size AA (1.5V).
2
Press [ ] to turn On the unit.
3
Turn On your TV.
4
Press the button on the TV’s remote control
that accesses the external input channel
repeatedly until you see "Initial Setup"
menu. (Please refer to your TV’s owner's
manual.)
If the TV is connected by an HDMI cable,
it may take a while for the "Initial Setup"
menu to come up.
5
Prepare
4.
6
Use [
/L] to select your desired
language, then press [OK].
Press [REC] to start recording.
Writing to Disc 90%
1
Insert a recordable disc (refer to page
24 in the Owner's Manual on how to
insert a disc).
Press [REC MODE] repeatedly to
select a recording mode.
Press [
] to Stop recording.
The title list will appear automatically after
writing to a disc is completed.
You will need to nalize DVD-RW or DVD-R
to play them back on other DVD players.
Refer to page 42 in the Owner's Manual
on how to nalize a disc.
t1SFTT
to exit the title list.
Press [DVD] rst.
Align the disc to
the disc tray guide.
5.
e.g.) DVD-R
Initial Setup
Select the language for Setup display.
OSD Language
English
Français
Español
Record(DVD)
VIDEO IN
AUDIO IN
L
R
L
R
IN --- AUDIO --- OU T
IN --- VIDEO --- OU T
ANT. INANT.OUT
LR
VIDEO OUTAUDIO OUT
rear of this unit
external tuner
Audio cable
Video cable
satellite
dish
ANT. IN
cable TV
company
RF coaxial cable
or
Video cable
Audio cable
Your setting will be activated.
The clock starts counting when you press [OK].
8
Use [
/ B] to select an item to set, and
use [
/L] to select the contents to suit
your preference, then press [OK] when you
nish setting all the contents.
7
Use [
/L] to select calendar or time,
then press [OK].
Clock Setting
JAN / 24 / 2013 ( THU
)
12 : 00 AM
Clock Setting
- - - / - - / - - - - ( - - -
)
- - : - - - -
1.
Connecting to an External Tuner
FUNAI is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.
DVD Recorder/VCR LINE-IN RECORDING (No Tuner)
Press [INPUT SELECT] to select the
appropriate external input position
(L1/L2) to which your external tuner is
connected.
Then select the desired channel to record
on the external tuner.
This Recorder only record on DVD-RW/-R,
cannot record on DVD+RW/+R.
For more info,
please contact
1-877-393-8624
or visit : www.funaiamerica.com
Manual
Please read the supplied Owner's
Manual for the detailed instructions.
*1VMN33215*
