Microscan QX-830 Industrial Barcode Scanner Configuration Guide

  • Hello! I am an AI chatbot trained to assist you with the Microscan QX-830 Industrial Barcode Scanner Configuration Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Copyright ©2018 Omron Microscan Systems, Inc. P/N 83-210830 Rev D
Pin Assignment
s
Item Description Part Number
1 QX-830 Compact Industrial Scanner FIS-0830-XXXXG
2 QX-1 Interface Device 98-000103-02
3 QX Cordset, Common, M12 12-pin Socket to M12 12-pin Plug, 1 m 61-000162-02
4 QX Cordset, Host, Serial, M12 12-pin Plug to DB9 Socket, 1 m 61-000152-02
5 QX Cordset, Host, Serial, M12 12-pin Socket to DB9 Socket, 1 m 61-000153-02
6 QX Power Supply, 24V, 100-240VAC, +24VDC, M12 12-pin Socket 97-000012-01
7 QX Cordset, Host, Ethernet, M12 8-pin Plug (Ultra-Lock) to RJ45, 1 m 61-000160-01
or QX Cordset, Host, Ethernet, M12 8-pin Plug (Screw-On) to RJ45, 1 m 61-000160-02
8 QX Cordset, M12 12-pin Plug / M12 12-pin Socket to MS-Connect 210, RS-232, 2 m 61-000158-03
9 QX Photo Sensor, M12 4-pin Plug, NPN, Dark On, 2 m 99-000020-02
Note: Additional cordsets and accessories are available in the Omron Microscan Product Pricing Catalog.
+10-28V
Trigger
Ground
Trigger/New Master / Input 1 Common
Ground
Output 3
Output 1
Output 2
New Master
Default
Power
Input Common
Output Common
RS-232 RxD
Trigger
RS-232
TxD
QX-830 (Back View)
QX-1 Interface
Device (Top View)
Input
Common
RS-422/485 RxD (–)
RS-232 TxD/
RS-232 RTS
Trigger
RS-232 RxD/
RS-232 CTS
Power
Ground
RS-422/485
RxD (+)
RS-422/485
TxD (+)
RS-422/485 TxD (–)
Input 1
Terminated
Connector A (All Models)
M12 12-pin Plug
Connector B (Serial Models)
M12 12-pin Socket
QX-1 Trigger Connector
4-pin Socket
Connector A is a serial M12 12-pin plug. It is the same for all
models of the QX-830.
Connector B is a serial M12 12-pin socket for serial models and
an Ethernet M12 8-pin socket for Ethernet models.
Important: See the QX-830 Compact Industrial Scanner User
Manual for a list of the wire colors that correspond to each pin.
Connector T on the QX-1 Interface Device is the trigger connector.
Connectors 1, 2, and 3 can be used to bus power and data as
required by the application.
TX (+)
RX (–)
RX (+)
TX (–)
Terminated
Ter m i n at ed
Connector B (Ethernet Models)
M12 8-pin Socket
Terminated
Ter m in a te d
POWER
TRIGGER
1, 3, T
1, 2, 3, T
1, 2, 31, 3
QX–830
Compact Industrial Scanner
Configuration Guide
Hardware Required
9
QX-830 Configuration
Standalone Configuration
Daisy Chain Configuration
Multidrop Configuration
Ethernet (with QX-1)
Serial (with QX-1)
Serial with MS-Connect 210
(without QX-1)
Important:
Configure
reader off-line
and then connect
to network when
ready for
dynamic use.
1
1
1
22
3
3
5
66
7
8
9
9
9
Ethernet (with QX-1)
Serial (with QX-1)
Serial or Ethernet (without QX-1)
Important: Do not attempt to
power more than four scanners
with a single power supply in a
daisy chain configuration. Add a
QX-1 and one power supply for
every four additional scanners in
the daisy chain.
Important: Configure reader off-line
and then connect
to network when
ready for dynamic use.
11
1
1
1
1
1
11
1
2
2
33
3
3
3
3
3
3
3
4
5
6
6
6
7
7
9
9
Multidrop Network with MS-Connect 5100
1
1
1
2
2
2
3
3
3
3
3
3
6
6
9
9
www.microscan.com
Copyright ©2018 Omron Microscan Systems, Inc.
/