Toro Weight Kit, Z593-D Z Master Mower Installation guide

Hello! I am an AI chatbot trained to assist you with the Toro Weight Kit, Z593-D Z Master Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Form No. 3354-336 Rev A

Weight Kit

For Z593D Z Master with DFS Vac Collection System

Model No. 110–3860

Installation Instructions

Note: T o comply with ANSI/OPEI B71.4-2004 Standard, this w eight m ust be added when a DFS V ac

Collection System is installed on a Z593D Z Master with 52 inc h mo w er .

Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.

Step

Installing the Weight

Parts needed for this step:

Weight

U-bolt

Locknut, (3/8 inch)

Washer, (3/8 inch)

Procedure

1. Raise the foot pan and then remo v e the

footrest from the mac hine ( Figure 1 ).

Figure 1

1. Bolt 3. Machine frame

2. Footrest

4. Nut

2. Install the w eight onto the mac hine frame with

2 U-bolts (3/8 x 5 inc h), 4 w ashers (3/8 inc h),

and 4 n uts (3/8 inc h) ( Figure 2 ).

3. Install the footrest onto the mac hine and lo w er

the footpan ( Figure 1 ).

Figure 2

1. U-bolt, (3/8 x 5 inch) 3. Washer, (3/8 inch)

2. Weight

4. Nut, (3/8 inch)

8111 Lyndale Avenue South

Bloomington, MN 55420

Printed in the USA.