Westermo RD-48 HV is a high-voltage galvanic transient surge protector for RS-422/485 interfaces. It safeguards your sensitive equipment from electrical surges and transients, ensuring reliable data transmission in harsh industrial environments. With an insulation voltage of 1000V, breakdown voltage of 7kV, and surge capacity of 1kW for 1ms, the RD-48 HV provides superior protection against electrical disturbances.
Westermo RD-48 HV is a high-voltage galvanic transient surge protector for RS-422/485 interfaces. It safeguards your sensitive equipment from electrical surges and transients, ensuring reliable data transmission in harsh industrial environments. With an insulation voltage of 1000V, breakdown voltage of 7kV, and surge capacity of 1kW for 1ms, the RD-48 HV provides superior protection against electrical disturbances.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Westermo RD-48 HV User guide
- Type
- User guide
- This manual is also suitable for
Westermo RD-48 HV is a high-voltage galvanic transient surge protector for RS-422/485 interfaces. It safeguards your sensitive equipment from electrical surges and transients, ensuring reliable data transmission in harsh industrial environments. With an insulation voltage of 1000V, breakdown voltage of 7kV, and surge capacity of 1kW for 1ms, the RD-48 HV provides superior protection against electrical disturbances.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
CCIT T7 Pro User manual
-
Socomec Communication interfaces Operating instructions
-
Allen-Bradley 6153 Product Data And Installation Instructions
-
Channel Vision 5050 User manual
-
Satel XPRS User guide
-
Dutec Basic I/O Product User manual
-
ABB AC 800M User manual
-
Elvox 6680/C17 Installer's Manual
-
ETS-Lindgren HI-4422 Owner's manual
-
Texas Instruments Comparing Bus Solutions (Rev. C) Application notes
