LUX-INST-P40-Upgrade-Instructions - 10118
a: 12884 S. Frontrunner Blvd, Suite 201, Draper, UT 84020 | p: 801-822-5450 | luxul.com
© Copyright 2018 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or
registered trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their respective holders.
Wireless Bridge + Range Extender
P40
Firmware Upgrade Instructions
The P40 must upgraded via Ethernet cable. We do recommend Factory Defaulting the P40 then performing the upgrade accord-
ing to the following instructions.
NOTE: See the P40 QIG for instructions on how to Factory Default your device.
1. Download the new P40 firmware from https://www.luxul.com/firmware-updates.aspx and save to your computer.
2. Make sure your P40 is powered on.
3. Connect an Ethernet cable from your computer to the Ethernet port of the P40.
4. Open your web browser and go to http://192.168.1.1
5. At the login prompt type in your administrator username and password (default is admin/admin).
6. Press the “Skip Wizard” button.
7. Choose the “Administrator” menu option from the left navigation menu.
8. In the left navigation menu under “Adminstrator” select “Firmware Update”.
9. Select “Choose File”, navigate to the location of the P40 Firmware, select it and choose “Open”.
10. Select “Update” to begin the upgrade.
11. After the upgrade is completed you will need to login again as you did in step 5. To access the new User Interface after the
upgrade go to: http://192.168.1.1
/