Screen Tight 5BAR32HD Operating instructions

Brand
Screen Tight
Model
5BAR32HD
Type
Operating instructions

This manual is also suitable for

One Better Way | Georgetown, SC 29440 | 800.768.7325
ScreenTight.com
IMPORTANT
Position Hinges
Measuring from the
top of your door, mark
the door frame at 10”,
40” and 67”. Position
each hinge on the
center of each mark.
Mount Hinges
Align the middle of the hinges with
the side of the door by pushing the
edge guide against the your door.
Mark hole locations and drill 3/32”
holes 3/16” deep. Attach with
included screws and slide
screw covers into place.
Mount Pull Handles
Mount pull handles at
desired height. Usually
aligned near the center
of the door — about 36
inches from the top of
the door.
SCREEN DOOR HARDWARE
INSTALLATION INSTRUCTIONS
Tape Measure
Watch our hardware installation video at ScreenTight.com/Hardware
Drill with 3.32” Drill Bit
and Phillips #2 Bit
TOOLS NEEDED
The process for installing Screen Tight
hardware is the same for both wood and
solid vinyl screen doors.
Guides on Hinges
Your hinges have built-in guides
to ensure proper installation.
Mount the hinges based on the
frame/door designation (g. A)
and be sure to push the edge
guide on the back (g. B) up
against the edge of your door
before mounting.
FIG A
FIG B
2 31
  • Page 1 1

Screen Tight 5BAR32HD Operating instructions

Brand
Screen Tight
Model
5BAR32HD
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents