idh by St. Simons 11041-003 Installation guide

Type
Installation guide

This manual is also suitable for

idh
by St. Simons, Inc.
Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories
Demand Quality, Demand idh
idhbrass.com
Installation Instructions
Professional Grade Quality Solid Brass
1-1/2Surface Bolt
Item# 11041
Dimensions:
Length: 1-1/2”
Width: 5/8”
Throw: 3/8”
Projection: 3/4” (base to top of knob)
Net Weight: 1.25 oz.
Gross Weight: 2 oz.
Solid Brass Wood Screws
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Position in desired position with edge of door.
2. Expose bottom screw hole by sliding bolt to up.
3. Mark position and drill 1/16” pilot hole 3/4” deep and
secure with screw provided.
4. Same process for the top screw hole.
5. Position strike with bolt, trace and mortise 1/8” deep and
drill 3/4” strike hole about 1” deep.
6. Re-align strike and drill 1/16” pilot holes 3/4” deep and
secure with screws provided.
7. Align strike plate; mark position and drill 1/16” pilot hole
3/4” deep and secure with screws provided.
Catalog Section: B
1-1/2” Surface Bolt
Item# 11041
Date: Rev 04/18
  • Page 1 1

idh by St. Simons 11041-003 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI