Fields of application
Suitable for acid-resistant installation and grouting of floor and wall tiles and mosaic in interiors
and exteriors. Suitable for applications where the surfaces are exposed to aggressive chemical
substances (see chemical resistance table) such as dairies, abattoirs, pubs, food factories in
general.
It is also recommended for grouting swimming pools and tanks, containing thermal or brackish
water.
2 PART EPOXY MORTAR
EPOXYSTUK X90
EXCLUSIVE DISTRIBUTOR FOR USA
Tile Doctor
www.TileDoctor.com
877-TileDoc (845-3362)
Made In Italy
For installation and grouting of ceramic tiles
with joint widths between 1 and 15 mm
Available in 4 colors - matt finish.
1-15
mm
waterproof
No more stains and dirt with Epoxystuk X90
waterproof grout
The joints are always the critical point in terms of cleanliness of a tiled surface.
Epoxystuk X90 is completely waterproof and makes the grouting surface stain-proof and
easy to wash with normal detergents on the market.
The benefits of easy-to-clean grouting
that doesn’t absorb liquids or stains
Absorbent cement grouting is a critical obstacle in cleanliness of tiled surfaces. It is
therefore possible to deteriorate for the following reasons:
• accumulation of dirt and other contaminants that leads to unclean and possibly unsafe
surfaces;
• discolouration and chromatic variations, efflorescence.
These processes of degradation increase in the presence of moisture and steam such as
in bathrooms and kitchens.
Unlike cement grout that requires sealing and maintenance Epoxystuk X90 does not
absorb liquids and dirt and can therefore be easily washed.
It additionally prevents the proliferation of unwanted contaminates ensuring the best
possible and most hygienic grout surface.
Grouting in contact with aggressive
or chemical substances
• dairies
• oil mills
• abattoirs
• breweries and wineries
• the food industry in general
• tanks containing thermal or brackish water
• tanks for fish breeding
R12
Easy to clean even for applications on very rough
R12 tiles
Thanks to the experience developed over the years in the epoxy adhesive and
grouts, Litokol has developed Epoxystuck X90 formula and achieved an easy
to apply and easy to clean grout by simply wiping with a sponge, even with the
roughest non-slip R12 tiles.
Safer for the user due to
its non-corrosive nature
Epoxystuk X90 is safer for the user and safeguards the environment:
the same safety labelling as a normal cementitious product.
Part B of Epoxystuk X90 (catalyst) is non corrosive as is commonly the
case in other products on the market.
Safe for housing as it has
very low VOC emissions
Many products and materials in domestic dwellings contain VOCs (volatile
organic compounds) which may be released over time. Epoxystuk X90
has very low emissions of volatile organic compounds - Class A +
according to French Regulations.
Beauty and strength in every residential situation
• 4 colors matt finish
• For interior and exterior wall and floor ceramic and mosaic tile installation and
grouting;
• underfloor heating;
• flooring and wall tiles for bathrooms and showers;
• countertops;
• terraces and balconies.
Grouting that is resistant to the most extreme
industrial applications
Industrial floors subject to high stresses such as the trafficking of trolleys, forklifts
and pallet trucks.
For flooring subject to a high level of public and
commercial use
Flooring intended for significant use such as shopping centres, airports, stations,
sports facilities, offices and shops, bars and public buildings.
/
