IDEAL Security ISB1AC Installation guide

IDEAL Security
Brand
IDEAL Security
Model
ISB1AC
Type
Installation guide

IDEAL Security ISB1AC is a handle set designed for inswinging doors only. It's easy to install, with a 1:1 scale template included for precise drilling. The handle set is durable and secure, with three 1/4" straight-through holes and two 3/16" 1" deep holes for added strength. It's the perfect choice for any home or office, providing both style and security.

IDEAL Security ISB1AC is a handle set designed for inswinging doors only. It's easy to install, with a 1:1 scale template included for precise drilling. The handle set is durable and secure, with three 1/4" straight-through holes and two 3/16" 1" deep holes for added strength. It's the perfect choice for any home or office, providing both style and security.

1.75in
44.5mm
.25in
6.4mm
STRAIGHT
THROUGH
3 PLACES
.09in
2.4mm
1" DEPTH
2 PLACES
3.25in
82.6mm
1.50in
38.1mm
1.18in
29.8mm
DOTTED LINE
TO BE ALIGNED
WITH EDGE OF JAMB
ALIGN DOTTED LINE
WITH EDGE OF JAMB
(NOT EDGE OF DOOR)
FIG 2
DOOR JAMB
INSIDE DOOR SURFACE
INSIDE DOOR
SURFACE
DOOR JAMB
FIG 1
OUTSIDE DOOR
SURFACE
FIG 3
ISB1 DRILLING TEMPLATE AND INSTALLATION INSTRUCTION
THIS HANDLE SET IS DESIGNED FOR INSWINGING DOOR ONLY.
THE INSIDE SURFACE OF THE DOOR SHOULD BE FLUSH
WITH THE DOOR JAMB. SEE FIG 1.
1. PRINT THIS SHEET USING 1:1 SCALE.
USE A RULER TO VERIFY IF IT IS 1:1 SCALE.
2. CLOSE DOOR, PLACE THE TEMPLATE ON INSIDE DOOR SURFACE,
ALIGN THE DOTTED LINE WITH THE EDGE OF THE DOOR JAMB,
NOT THE EDGE OF THE DOOR. SEE FIG 2.
3. MARK ALL HOLE LOCATIONS WITH A CENTER PUNCH.
DRILL THREE 1/4" HOLES STRAIGHT THOUGH THE DOOR.
DRILL TWO 3/16" HOLES 1" DEEP. SEE FIG 3.
4. FASTEN THE HANDLE SET AND THE STRIKE IN PLACE.
1.75in
44.5mm
.25in
6.4mm
AU TRAVERS
3 PLACES
.094in
2.4mm
1" PROFONDEUR
2 PLACES
3.25in
82.6mm
1.50in
38.1mm
1.18in
29.8mm
ALIGNEZ LA LIGNE
DE POINTILLÉS
SUR LE BORD DU
MONTANT DE LA PORTE
ALIGNEZ LA LIGNE DE POINTILLÉS
SUR LE BORD DU MONTANT DE LA PORTE,
PAS LE BORD DE LA PORTE
FIG 2
MONTANT
SURFACE INTÉRIEURE
DE LA PORTE
SURFACE INTÉRIEURE
DE LA PORTE
MONTANT
FIG 1
SURFACE EXTÉRIEURE
DE LA PORTE
FIG 3
ISB1 GABARIT DE PERÇAGE ET INSTRUCTIONS D’INSTALLATION
CET ENSEMBLE DE POIGNÉE EST CONÇU POUR
PORTE OUVRANT VERS L’INTÉRIEURE SEULEMENT.
LA SURFACE INTÉRIEURE DE LA PORTE DEVRAIT ÊTRE
ALIGNÉE AVEC LE MONTANT DE PORTE. VOIR LA FIGURE 1.
1. IMPRIMER CETTE FEUILLE À L’ÉCHELLE 1:1.
UTILISEZ UNE RÈGLE POUR VÉRIFIER SI C’EST BIEN L’ÉCHELLE 1:1.
2. FERMEZ LA PORTE, PLACEZ LE GABARIT SUR LA SURFACE
INTÉRIEURE DE LA PORTE, ALIGNEZ LA LIGNE DE POINTILLÉS
SUR LE BORD DU MONTANT DE LA PORTE,
PAS LE BORD DE LA PORTE. VOIR LA FIGURE 2.
3. MARQUER LA POSITION DES TROUS AVEC UN POINÇON.
PERCEZ TROIS TROUS DE ¼ PO AU TRAVERS LA PORTE.
PERCEZ DEUX TROUS DE 3/16 PO ET 1 PO DE PROFONDEUR
SUR LE MONTANT. VOIR LA FIGURE 3.
4. FIXER LES POIGNÉES ET LA GÂCHE EN PLACE.
.88in
22.4mm
3.61in
91.7mm
1.10in
27.8mm
2.90in
73.8mm
.36in
9.1mm
1.50in
38.1mm
1.75in
44.5mm
3.25in
82.6mm
.63in
16mm
.33in
8.3mm
3.88in
98.4mm
.27in
6.7mm
.68in
17.2mm
2.99in
76mm
1.12in
28.3mm
3.63in
92.1mm
Thank you for your purchase.
If you require any information or installation assistance,
please contact our customer service.
Monday to Friday 7:30 am -3 pm (Eastern Time)
Tel: 1-800-361-2236 x 230
e-mail:
[email protected]
Updated instructions (if applicable) can be found at
www.idealinc.com
IDEAL SECURITY INC.
LASALLE, QUEBEC, CANADA
CORAOPOLIS, PA., USA
ISB1 DIMENSIONS
Nous vous remercions pour votre achat.
Si vous avez besoin d'aide pour l’installation ou information,
veuillez communiquer avec notre service à la clientèle.
Du Lundi au Vendredi de 07:30 à 15:00 (heure de l'est)
Tel: 1-800-361-2236 x 230
E-mail:
[email protected]
Les Instructions de mise à jour (le cas échéant) se trouvent à
www.idealinc.com
IDEAL SECURITY INC.
LASALLE, QUEBEC, CANADA
CORAOPOLIS, PA., USA
  • Page 1 1
  • Page 2 2
  • Page 3 3

IDEAL Security ISB1AC Installation guide

IDEAL Security
Brand
IDEAL Security
Model
ISB1AC
Type
Installation guide

IDEAL Security ISB1AC is a handle set designed for inswinging doors only. It's easy to install, with a 1:1 scale template included for precise drilling. The handle set is durable and secure, with three 1/4" straight-through holes and two 3/16" 1" deep holes for added strength. It's the perfect choice for any home or office, providing both style and security.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents