ARC RCL-100 LED Searchlight Template

Type
Template

This manual is also suitable for

2 7/8”
(73mm)
3 23/32”
(94.5 mm)
URP-102 Point Pad
Flush Mount Template
Use U-Clamp to secure
control switch
C
L
Bolt Holes Size
2 Places 13/64”
(5.16 mm)
1”
(25.4 mm)
1 13/16”
(46 mm)
Wire Clearance Hole Size
1” Diameter Minimum
URP-102 Point Pad
Surface Mount Template
5757 Ravenswood Road
Ft. Lauderdale, FL 33312
+1 (954) 981-3333 Fax +1 (954) 983-5087
www.acrartex.com
RCL-50 / RCL-100
Remote Control Searchlight System
Mounting Templates
3.94
100 mm
1.00
25.4mm
.25
6.34mm
4 PLACES
1.50
38.1mm
1.50
38.1mm
1=25.4 ( mm)
SCALE 1=1 ( in.)
0
1
2
3
4
SEARCH LIGHT MOUNTING TEMPLATE
Please Note: If mounting template is obtained from the ACR website, any
electronic media or from a photocopy, please verify the dimensions of scale
shown with an actual measuring device. Duplicate templates may not be of true
1:1 scale. Any deviation should be considered when using mounting template.
Y1-03-0138-1 Rev. G
  • Page 1 1

ARC RCL-100 LED Searchlight Template

Type
Template
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI