Model:
Qty. Description
4mm Hex Key (included)
CDD200, CDD201, CDD202
frame into the insert nuts
on the arm supports
__(1) HARDWARE PACK
__(2) ARM ASMB (RH/LH)
__(1) CHAIR
Step 1
until the arm is snug against the back leg.
the attached dowel screw into the pilot hole
Attach back of arm by threading
Step 2
Attach (4)1-3/4 bolts thru the seat
TOOLS NEEDED
ALLHARDWAREISCOATEDSTAINLESSSTEEL
A -1/4-20 X 1-3/4 WAFER SHCS
4
CDD201
CDD202
HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)
1
A
CLOCKWISE
ROTATE
PILOT HOLE
INSERT
NUTS
ROTATE
CLOCKWISE
CDD200
ASSEMBLY INSTRUCTIONS
11/30/2012
/
