Hill-Rom Connex ProBP 3400 Digital Blood Pressure Device Reference guide

I've reviewed the Welch Allyn Connex ProBP 3400 Quick Reference Guide, which details how to convert the handheld blood pressure monitor into wall-mounted, desk-mounted, or mobile stand configurations. This document provides part numbers and descriptions for the necessary components and also mentions optional accessories for different setups. I'm ready to answer any questions you have about this device and its setup.
What is needed to convert to a wall mount configuration?

What is needed to convert to a desk mount configuration?

What is needed to convert to a mobile stand configuration?

To convert to Wall Mount Configuration, customer will need:

PN: 4601-61 Desc: WALL MOUNT WITH BASKET FOR PROBP 3400

PN: 3400-31 Desc: DOUBLE TUBE BLOOD PRESSURE HOSE (10FT) - OPTIONAL (to extend

the BP hose from 5' as supplied with the handheld configuration to 10' for extra

reach)

To convert to Desk Mount Configuration, customer will need:

PN: 4602-61 Desc: DESK MOUNT W/BASKET FOR PROBP 3400

To convert to Mobile Stand Configuration, customer will need:

PN: 4600-61 Desc: MOBILE STAND W/MOUNTING KIT PROBP 3400

PN: PWCD-5WT-B Desc: PROBP MOBILE STAND CORD ASSY - OPTIONAL (4600-61 comes with a

Power Supply Mounting Kit. The PWCD-5W-B includes a new transformer that mounts in

the Power Supply Mount, a short 18” USB cable that connects the output of the

transformer to the ProBP, and a long 8’ power cord that plugs the transformer into a wall

outlet. The power supply and long USB cable that comes with the Handheld configuration

can be used with the mobile stand, but the PWCD-5WT-B provides a cleaner installation.)

Welch Allyn Connex® ProBP 3400

Converting Handheld to Other Configurations