2. ROOMS TO GO
  3. 23072705

ROOMS TO GO 23072705 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the UNRS 270 VANCOUVER End Table. This document details how to assemble the drawer, including attaching the handle using bolts. I'm ready to answer your questions about the assembly process, parts, or any other aspect of the end table mentioned in the instructions.
  • What tool is required for assembly?
    Are all parts in the parts bag?
    How do I install handle pull?
ASSEMBLY INSTRUCTIONS
instructions for:
INTRUCTIONS:
ATTENTION: Some lettered parts listed on the instructions sheets may not be in the
parts bag, they may already be assembled.

VANCOUVER END TABLE
ITEM SKUDESCRIPTION IMAGE # PZ
1
2
NL-VNHNDL
NL-VNBOLT
A
BHANDLE PULL (ALREADY INSTALLED)
Bolt 8/32 x 7/8” (ALREADY INSTALLED)
TOOLS REQUIRED: Phillips Screwdriver (Not Included)
FIG. 1 FIG. 2
B
A
1.- Unscrew the bolts (A) that are installed in the front of the drawer to
take the pull (B)
2.-Place the screws from inside the drawer and screw them to the handle pull
as shown in FIG. 2
ASSEMBLY INSTRUCTIONS
instructions for: UNRS 270 VANCOUVER END TABLE
RTG SKU: 23072705, 23062704
/