2. ROOMS TO GO
  3. 22172706

ROOMS TO GO 22172706 Assembly Instructions

  • Hello! I am your chat assistant. I have carefully reviewed the assembly instructions for the UNRS VANCOUVER 270 VANCOUVER Coffee Table. This document guides you through attaching the handle pulls to the drawers using bolts and screws. I'm here to assist with any questions you may have regarding these instructions or the assembly process.
  • What tool is required for assembly?
    Are all parts included in the parts bag?
    What is the first step of assembly?
ASSEMBLY INSTRUCTIONS
instructions for:
INTRUCTIONS:
ATTENTION: Some lettered parts listed on the instructions sheets may not be in the
parts bag, they may already be assembled.

VANCOUVER COFFEE TABLE
ITEM SKUDESCRIPTION IMAGE # PZ
4
8
NL-VNHNDL
NL-VNBOLT
A
BHANDLE PULL (ALREADY INSTALLED)
Bolt 8/32 x 7/8” (ALREADY INSTALLED)
TOOLS REQUIRED: Phillips Screwdriver (Not Included)
FIG. 1
FIG. 2
A
1.- Unscrew the bolts (A) that are installed in the front of the drawer to
take the pull (B)
2.-Place the screws from inside the drawer and screw them to the handle pull
as shown in FIG. 2
B
ASSEMBLY INSTRUCTIONS
instructions for: UNRS 270 VANCOUVER COFFEE TABLE
RTG SKU: 22172706, 22162705
/