Rime Lite XB WiFi Operation Instruction Manual
- Type
- Operation Instruction Manual
1. Connecting UTP LAN port.
Connect Wi-Fi converter to Wireless router with UTP LAN cable. (Reference image B1,B2)
* If the Wireless router is connected to the Internet, UTP LAN cable has to be connected to LAN 1~4 Port.
** Connect UTP LAN Cable to Internet main port if the Internet use is nothing the area.
* In case of sharing AC power with Wire & Wireless router, insert the cable (C2) to A2 socket and A4
socket and then insert AC adapter(C1) to A3 socket.
B1 C1
C2 C3
Wi-Fi Convter
Wireless Router
WAN Internet Port
B2
2. Connecting Wi-Fi converter power supply.
Insert AC adapter(C1) into Wi-Fi power(A2 or A3) slot and connect AC power plug to any AC power socket.
A4 A5
A1 A2 A3
* Change the configuration of Apple devices(iPhone, iPad, ipod touch)
‘DHCP’ to ‘STATIC’.
For example) IP Adress : 192.168.11.10 ~ 192.168.11.99
Subnet Mask : 255.255.255.0
3. Check Network SSID (Sub System IDentification)
For the check of Wi-Fi’s normal operation.
Complete the sequence instruction(No: 1,2), and check the SSID network with Apple device(i-Phone, i-Pad, i-Podtouch)can be operated normally.
change Wi-Fi configuration of Apple device ( iPhone, iPad, iPod touch) ‘DHCP’ to ‘STATIC’.
* IP Address is 192.168.11.xx. Subnet Mask : 255.255.255.0
iPhone Setting ( Wi-Fi SSID)
iPhone Setting IPad setting
IPad setting (Wi-Fi SSID)
5. “XB WIFI” Flash Scan (iPhone)
Scan flashes are connected to iPhone. Run ‘’xb wifi’, and touch Option button(A2). Scan(A3) Studio which were connected flashes.
* Group Setting each xb-prime (A,B,C,D,E).
In ‘xb wifi’ option(i-Phone), select a studio(A,B,C,D,E) of which XB-prime flashes belong to
Run ‘Scan’
A2
A3
A1
6. XB WIFI (iPhone)
Current channel
Sleep mode On / Off
Prop(On) : concurrent control of the Flash and Modeling light
Prop(Off) : Individual control of the Flash and Modeling light
Modeling light
On / Off
Group Setting (A, B, C, D, E)
Flash Output ( + : Up, - : Down ) Modeling lamp Output
( + : Up, - : Down )
Flash Test
Automatic : Modeling lamp keep turning on all the time during flashing
Status of Flash
Status of Modeling lamp
Status of the strobe functions
Controlling each flash separately (Master)
Controlling each flash at once(Indivisual)
Cell
On / Off
Sound
On / Off
6. XB WIFI (iPad)
Status of flash setting
Controlling of flash setting
Controlling of
Modeling setting
Sleep mode On / Off
Flash Test
CELL On / Off
SOUND On / Off Prop(On) : concurrent control of the Flash and Modeling light
Prop(Off) : Individual control of the Flash and Modeling light
Modeling light On / Off
Status of Modeling lamp
Group Setting (A, B, C, D, E)
Flash Output ( + : Up, - : Down )
Modeling lamp Output ( + : Up, - : Down )
Controlling of flash setting
Controlling of Modeling setting
Automatic : Modeling lamp keep turning on all the time during flashing
Current channel
Status of Flash
Strobe Name
Status of Modeling lamp
Status of the strobe functions
Controlling each flash separately (Master)
Controlling each flash at once(Indivisual)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Rime Lite XB WiFi Operation Instruction Manual
- Type
- Operation Instruction Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Godox X2T-F TTL Wireless Flash Trigger for Fujifilm Fuji, Bluetooth Connection, 1/8000s HSS, 5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light User manual
-
Avalon StarGO User manual
-
Yamaha SC2 Owner's manual
-
-
Godox Godox X2T-N TTL Wireless Flash Trigger for Nikon, Bluetooth Connection, 1/8000s HSS,5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light User manual
-
-
-
Universal Audio OX Amp Top Box Owner's manual
-
Motic EasyScan One User manual
-
Bluesound Powernode User manual
