morse 620-117 User manual

Hello, I'm here to assist you with your questions about the MORSE 50Hz 620 Series Drum Racker. I have reviewed the CE Declaration of Conformity, which confirms the product's compliance with European directives for EMC, low voltage, and machinery safety. The document details the specific standards the product meets and is valid for the test sample of the specified product.
What is the purpose of this document?

What directives does this product comply with?

What is the model name?

The Specialist In Drum Handling Equipment

CE Declaration of Conformity

50Hz 620 Series MORStak Drum Rackers

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CE Declaration of Conformity

This product has been tested to the current appropriate standards

and is in compliance with the following

-------------------------------------------------------------------

EMC Directive: 2014/30/EU

Generic Emissions Standard: EN 61000-6-4:2007

Product Specic Emissions: EN 55011 Class A

Generic Immunity Standard: EN 61000-6-2: 2005

Immunity: EN 61000-4-2 Electrostatic Discharge

EN 61000-4-6 Conducted Susceptibility

Low Voltage Directive: 2014/35/EU

Standard: EN 60204-1 Safety of Machinery

Machinery Directive: 2006/42/EC

Standard: EN 60204 Safety of Machinery

-------------------------------------------------------------------

Manufacturer’s Name: MORSE Mfg. Co., Inc.

Manufacturer’s Address: 103 Kuhn Rd.

Syracuse, NY 13208

Product: MORStak Drum Rackers

Model: 50Hz 620 Series

Serial Number: 400000 and up

-------------------------------------------------------------------

This Certicate of Compliance issued 2022 is valid for the test sample of the product specied

above and that it conforms to the Directive(s) and Standard(s).

Signature:

Nathan Andrews

President

Morse Manufacturing Company, Inc.

103 Kuhn Rd.

Syracuse, New York, USA 13208

Phone: (315)-437-8475

Fax: (315)-437-1029