Copyright 2022 - Morse Mfg. Co., Inc. Form DC611-50 (Updated 2 Sep., 2022) 1
The Specialist In Drum Handling Equipment
CE Declaration of Conformity
50Hz 611 Series MORStak Drum Rackers
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
CE Declaration of Conformity
This product has been tested to the current appropriate standards
and is in compliance with the following
-------------------------------------------------------------------
EMC Directive: 2014/30/EU
Generic Emissions Standard: EN 61000-6-4:2007
Product Specic Emissions: EN 55011 Class A
Generic Immunity Standard: EN 61000-6-2: 2005
Immunity: EN 61000-4-2 Electrostatic Discharge
EN 61000-4-6 Conducted Susceptibility
Low Voltage Directive: 2014/35/EU
Standard: EN 60204-1 Safety of Machinery
Machinery Directive: 2006/42/EC
Standard: EN 60204 Safety of Machinery
-------------------------------------------------------------------
Manufacturer’s Name: MORSE Mfg. Co., Inc.
Manufacturer’s Address: 103 Kuhn Rd.
Syracuse, NY 13208
Product: MORStak Drum Rackers
Model: 50Hz 611 Series
Serial Number: 400000 and up
-------------------------------------------------------------------
This Certicate of Compliance issued 2022 is valid for the test sample of the product specied
above and that it conforms to the Directive(s) and Standard(s).
Signature:
Nathan Andrews
President
Morse Manufacturing Company, Inc.
103 Kuhn Rd.
Syracuse, New York, USA 13208
Phone: (315)-437-8475
Fax: (315)-437-1029
/