Tops MP 5909 Operating instructions

Category
Network Video Recorders (NVR)
Type
Operating instructions

This manual is also suitable for

OPERATION MANUAL
1
TOPS DIGITAL VIDEO RECORDER
TOPS DVR
TOPS DVR
Operation Manual
OPERATION MANUAL
2
WARNING & CAUTION
This symbol indicates that dangerous voltage constituting
a risk of electric shock is present within this unit
This symbol indicates that it may cause injury, damage and
other harmful results
WARNING
CAUTION
All cautions and warnings on this manual should be noted failure to heed this warning &
caution will result in serious damage
OPERATION MANUAL
3
Verify that the voltage is set correctly for user location
Avoid direct sunlight, heating equipment and electric equipment
(danger of fire)
Be sure that power is plugged in securely
(may cause fire if the connection is unstable)
Do not touch the cord with wet hand
it may cause severe electric shock
Do not pull on the power cord
(may cause fire or electric shock if cord is damaged)
Do not disassemble or reconstruct product
(may cause fire, electric shock or defects)
When in notice of smoke or weird smell, please stop usage and pull out the
power plug and contact the service center
(continued usage may cause fire or electric shock)
Do not place or drop metallic objects (coins, hair pin, metal) or easily
flammable products (matches, paper) in the ventilation of the product
(may cause fire or electric shock)
Do not place any liquid filled objects on the product
(may cause fire, electric shock or other injuries)
Do not install product in areas of high humidity, dust or is soot-covered
(may cause fire, electric shock or defects)
WARNINGS
OPERATION MANUAL
4
To product use hour it uses the all the member cable where becomes the
ground connection it wishes
Before operation, become familiar with all the special features and warning
associated with this equipment and read this manual carefully
Avoid installation in cold areas
This product is designed to operate under max 40℃
Single phase power supply operation is not recommended to prevent a power
supply failure ups is strongly recommended
Back up the important data
When cleaning the product, do not use water, but use a dry cloth to gently
wipe the product
Avoid installation in uneven areas
(may cause defect in product)
Do not place heavy objects on product
(may cause injury)
Avoid areas of magnetic fields and severe vibration
(may cause defect in product)
Do not drop the product or cause sudden impacts
This product is heavy be careful when moving this product
CAUTIONS
OPERATION MANUAL
5
INSTALLATION
INSTRUCTION
1) This device designed to operate under max 40℃ when you install this device in
the rack, please consider the max ambient temperature please install this device
proper ambient temperature of all part
2) Caution : when you install this device in the rack, the operating ambient
temperature may be greater than room ambient please consider this condition and
simulate the max temperature and install in an environment compatible temperature
3) Reduced air flow : installation of this device in a rack should be such that the
amount of air flow required for safe operation of this device is not compromised
please provide enough space to get the proper air flow
4) Mechanical loading – mounting of this device in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading
5) Circuit overloading : please read the rating in the nameplate and consider
appropriate power supply and supply wiring
6) When you are using like a power strips except direct connections to the branch
circuit, please make sure to connect reliable earthing maintained
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense
Connecting Power source to System Using 110V power source Make sure power select switch set to
115V(110V use)
Using 220V power source Make sure power select switch set to 230V(220V use)
NOTICE: For U S A and Canada regions; use only UL listed CSA labeled detachable power cord, 3-
conductor, 18 AWG, SVT or SJT type, plug rounding type parallel blade, cord connector body-IEC
320 style to mate with appliance inlet on product
IMPORTANT The only way to disconnect power completely is to unplug the power cord
Make sure at least one end of the power cord is within easy reach so that you can unplug the
computer when you need to
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO THE
MANUFACTURER’S INSTRUCTIONS
WARNING
This is a class A product In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures
Changes or modifications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment
OPERATION MANUAL
6
4. CONFIGRATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.1 Camera/Sensor ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.2 Schedule ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.3 Sensor ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.4 Password ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.5 Backup ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4.6 Network ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
243. SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
253.1 Search ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
273.2 Panorama Search ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
283.3 Save ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
142. SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
152.1 Surveillance ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
182.2 Preset Setting ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
182.3 1CH Search ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
202.4 Backup ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
222.5 How to Log In/Out ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
232.6 Password/Rotation ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
111.3 Rear Layout ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
101.2 Front Layout ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
91.1 Product Contents ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
81. INSTALLATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
TABLE OF
CONTENTS
OPERATION MANUAL
7
539. CLIENT PAN/TILTㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
549.1 Searchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
549.2 Presetㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
538. CLIENT SEARCHㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
548.1 Searchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
548.2 Detail Searchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
517. CLIENT SURVEILLANCEㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
527.1 Client Surveillanceㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
486. CLIENT CONNECTIONㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
496.1 IP Connectionㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
506.2 PDNS Connectionㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
986. SUPPLEMENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
475.2 PAN/TILT Installationㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
465.1 Sensor/ D/O Installationㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
455. SUPPLEMNET ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
OPERATION MANUAL
8
1.
INSTALLATION
1.1 Product Contents
1.2 Front Layout
1.3 Rear Layout
OPERATION MANUAL
9
DVR Power cable Loop Cables
Only MP8916
MouseKeyboard
Program CD
Windows OS CD
Manuals
Handle, Screws
Key
1.1 PRODCUT CONTENTS
Note:
The above contents will be changeable with different models
OPERATION MANUAL
10
1.2 FRONT LAYOUT
MP 5909/6916/8916
Power Switch
Power LED, HDD LED
Lock
USB
Expansion guide
for HDD, CD-RW,
etc
OPERATION MANUAL
11
TOPS5909/6916/8916
1.2 FRONT LAYOUT
The system layout may be different from each other model
Speaker
Power LED, HDD LED
3 5 inch floppy
disk drive
Lock
Power switch
Expansion guide for
HDD, CD-RW, etc
OPERATION MANUAL
12
MP5216
1.2 FRONT LAYOUT
The system layout may be different from each other model
Expansion guide for
HDD, CD-RW, etc
Power switch
USB Port
HDD LED
Power LED
OPERATION MANUAL
13
1.3 REAR LAYOUT
MP6916/8916
VGA Out
LAN
Printer Port
Audio Out
(Green)
Mouse/
Keyboard USB Port
Verify that the voltage is set
correctly for use location.
!Warning
AC Power Inlet
115/230 VAC switch
Audio In
Alarm Out (Option)
Sensor In (Option)
Camera In/MUX Out/SPOT Out
OPERATION MANUAL
14
1.3 REAR LAYOUT
MP5916/5909
VGA Out
LAN
Printer Port
Audio Out
(Green)
Mouse/
Keyboard
USB Port
경고
AC Power Inlet
115/230 VAC switch
Alarm Out (Option)
Audio In
Camera In/MUX Out/SPOT Out
Sensor In (Option)
PAN/TILT Port
Verify that the voltage is set
correctly for use location.
!Warning
OPERATION MANUAL
15
MP5909/6916/8916
1.3 REAR LAYOUT
AC power inlet
115/230 VAC switch
Verify that the voltage is
set correctly for user
location
!WARNIN
G
LPT1 printer port
Pan/Tilt port 1,2
LAN
Video output
TV out 1,2
Sensor Digital out
Audio output
Camera in
Mouse
Keyboard USB port
TOPS 8916
Audio input
Camera output
TOPS 5916
TOPS 6916
Audio input
OPERATION MANUAL
16
2.1 Surveillance
2.2 Preset Setting
2.3 1CH Search
2.4 BACKUP
2.5 How to Log In/Out
2.6 P/W & Rotation
2. SURVEILLANCE
OPERATION MANUAL
17
2.1 SURVEILLANCE
Surveillance Mode
Search Mode
Setup Mode
Backup Mode
Password / Rotation
User Mode (Log In /Out)
⑦Shut Down
Main Mode
NOTE:
Diskette BACKUP and PRINT buttons are only
available on SEARCH MODE.
①Main Menu
② Live View
③ Camera Controller
④ Camera Layout
⑤Digital Zoom
⑥Volume Control
⑦ 1 CH Pop Up Search
⑧Log In User
⑨Map Search
②③
Main Menu
OPERATION MANUAL
18
Screen Information Channel Information
① Camera Name
② Recording Status
NOR – Normal Recording
MOT – Motion Recording
SEN – Sensor Recording
MOT+SEN – Motion + Sensor
A – Audio Recording
③ Camera Image
Camera View Layout
①1 CH
②4 CH
③9 CH
④ 16 CH
⑤1 Main + 7 Sub CH
⑥ 1 Main + 12 Sub CH
⑦2 Main + 8 Sub CH
⑧3 Main + 4 Sub CH
⑨Rotation
⑩ User Selection
⑪Pop UP ON/OFF
⑫ Full Screen
① Camera Group
② Camera No.1
③ Camera Name
④ Camera Resolution
⑤ Camera Protocol
⑥ Sensor Group
⑦ D/O Group (Alarm Out)
⑧ Audio Group
⑨ External Monitor
NOTE:
Sub menu is available when right mouse
click each CH like “External Monitor” or
“ON/ OFF”
③④
OPERATION MANUAL
19
Digital Zoom
PAN/TILT
①Digital Zoom Box (RED)
② Panning View
③Digital Zoom Control Bar
MOT
MOT
Digital Zoom is only available at 1 CH
layout.
16
①Zoom
②Focus
③Iris
④Preset No.
⑤Preset
⑥P-Run
⑦Light
⑧ Mouse Control Speed
⑨PTZ Direction
⑩ Protocol Information
⑪ Preset/Pattern Save
⑫ A-Run: Auto moving to the Position
⑬ Pattern: Auto moving according to
Pattern Set
⑭ Power: Turn On/Off Camera
⑮Wiper
Camera No.
16
User Selection
① Click “USER SELECTION” button
② Drag a cam from “CAMERA
INFORMATION” and drop it on the
“LIVE VIEW”
Note:
The below is the example of “User
Selection”.
Cam1. Cam2.
Cam3. Cam4.
Cam2. Cam1.
Cam4. Cam3.
OPERATION MANUAL
20
① Select CH No.
② Tick “Mouse Control”
③ Adjust “Speed”
④ Move the direction with mouse
How to set Preset
Note:
PTZ Control is only available at 1 CH
layout.
PTZ MENU is displayed when PTZ camera
is selected.
① Select CH No.
② Select “Preset
③ Tick “Preset Save”
④ Move the camera direction
⑤ Select a “Preset No.” to save
⑥ Click “P-Run’ to move the saved Preset
How to delete Preset
① Select CH No.
② Select “Preset
③ Select a “Preset No.” to delete
How to set Pattern
① Select CH No.
② Select “Pattern”
③ Tick “Pattern Save”
④ Move the camera direction
⑤ Deselect “Pattern Save
⑥ Moving between ③ and ⑤
How to use Mouse Control
Note:
1 CH Search is available at Surveillance
Mode
②③
① 1CH Search
② Smart Search (Object Search)
③Map Search
② ③
⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫
①CH No.
②Rec. Time
③ Record Type
④Close 1 CH Search
⑤ Recorded Image
⑥First Image
⑦Previous Image
⑧Reverse
⑨Playback
⑩Stop
⑪Next Image
⑫Last Image
1CH Search
2.2 PRESET SETTING 2.3 1CH SEARCH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59

Tops MP 5909 Operating instructions

Category
Network Video Recorders (NVR)
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI