Dahua EAP6218-O Quick start guide

Brand: Dahua

Model: EAP6218-O

Type: Quick start guide

Quick Start Guide

Website: www.dahuasecurity.com

Address: No.1399 Binxing Road, Binjiang District, Hangzhou, P.R.China Postcode: 310053

Tel:+86-571-87688888 28933188

Email: [email protected]

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

1 Mounting

Figure 1-1 Installation

Figure 3-1 AP

Outdoor Access Point

Outdoor

Determine device processing power outage status.

As shown in Figure 1, insert the hoop into the holding pole on the

back of the casing.

Use a hoop to attach the AP to the pole (applicable pole diameter

There are multiple specications for AP antennas to choose from, and this

guide takes the default model as an example.

Holding pole

Hoop

AP device

Hoop 2pcs

Accessories List

2 Connection

3 Note

The outdoor AP device is connected to the PoE port of the PoE power

adapter through a network cable. (For non-standard network cables, it

is necessary to ensure that the impedance of a single line in the required

length of the network cable does not exceed 6 Ω).

Connect the PC to the PoE power adapter LAN port through a network

cable.

After the PoE power adapter is powered on, the power light of the

outdoor AP device remains on, indicating that the device is powered

on and running.

Checking the network connection status on the PC can check whether

the network connection between the PC and the outdoor AP is normal.

Device

PoE Power

adapter

Figure 2-1 Network connection

The user‘s wireless terminal should be within the coverage range of the AP signal as

much as possible.

Connect the network cable of the AP to ensure that the eight cable cores are normal

and in good contact with the crystal heads at both ends. Use Cate5e or higher Ethernet

cables, and after the production of the cables, use a cable tester for testing.

The recommended installation height for AP is 2-3 meters above the ground to ensure

optimal signal coverage.

lf the Outdoor AP adopts a power supply of PoE 48 V, use a switch with

a power supply of IEEE802.3at standard.

When the wireless scale is large and uses more Outdoor APs, we

recommend using a AC wireless controller to manage all the APs.

Step 1

Step 2

Step 3

Step 4

4 Device Management

Dahua EAP6218-O Quick start guide

Dahua EAP6218-O Quick start guide

Dahua EAP6218-O Quick start guide

Related papers

Other documents