2. Jar Furniture
  3. NEW ZEALAND

Jar Furniture NEW ZEALAND Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the NEW ZEALAND TUB CHAIR. This document details the necessary parts and steps to assemble the chair, including how to attach the wooden legs using bolts, flat washers, and spring washers. I'm ready to answer your questions about the assembly process or the chair itself.
  • What parts are included for assembly?
    What tool is needed to assemble the chair?
    How to assemble the chair?
Take out the 4 wooden legs and the package of
hardware accessories from the seat(P1).
Insert each leg(P2,P3) completely vertically into each seat frame corner.
Now tighten the bottom bolt at first, then the blot on the top by using
8 Bolts(H1)+8 Flat washer Rings(H3)+8 Spring washer Rings(H2) with the tool provided.
THE JOB IS COMPLETE
PLEASE DISPOSE OF ALL PACKAGING THOUGHTFULLY
IN THE INTEREST OF OUR ENVIRONMENT
You will need:
8*Bolt
(H1)
8*Spring Washer
(H2)
8*Flat Washer
(H3)
Step 1
Assembly Instructions
NEW ZEALAND
TUB CHAIR
(P1)
(P3)
Page 4
(P2)
Ver1.1
P
Page 2
Page 3
2*Front legs
(P2)
Accent Chair
(P1)
2*Back legs
(P3)
What you Need
1x Allen Key (5mm)
(PROVIDED)
8*Bolt
(H1)
8*Flat Washer
(H3)
8*Spring Washer
(H2)
Please make sure you have all these parts before you start.
/