Skyrc D200neo Charger is an AC/DC Multi-Function Smart Charger with independent dual ports and supports most batteries in the RC industry. It can be used for various charging scenarios as a dual input charger. It supports Lithium batteries (LiPo/LiFe/Lilon/LiHV), NiMH/NiCd batteries, and Pb Lead-Acid batteries. D200neo has a meticulously designed interface and powerful functions. It features a newly upgraded scroll button control and SkyCharger App control. It also has a DC Power Supply and USB Type-C PD/QC3.0 Output, allowing you to charge your devices conveniently.
Skyrc D200neo Charger is an AC/DC Multi-Function Smart Charger with independent dual ports and supports most batteries in the RC industry. It can be used for various charging scenarios as a dual input charger. It supports Lithium batteries (LiPo/LiFe/Lilon/LiHV), NiMH/NiCd batteries, and Pb Lead-Acid batteries. D200neo has a meticulously designed interface and powerful functions. It features a newly upgraded scroll button control and SkyCharger App control. It also has a DC Power Supply and USB Type-C PD/QC3.0 Output, allowing you to charge your devices conveniently.
SKYRC D200neo Instruction Manual
1. SKYRC D200neo
AC/DC Multi-Function Smart Charger
Instruction Manual
SK-100196
V1.0
SKYRC D200neo Instruction Manual
SKYRC D200neo 2.
Introduction
Package
Chart
Specification
Warning
Standard Battery Parameters
Program Flow Chart
Explanation of Buttons
Power and Battery Connection
Charger Operation
Lithium Battery Program(LiPo/LiFe/Lilon/LiHV)
Parallel Charge(LiPo/LiFe/Lilon/LiHV)
NiMH/NiCd Battery Program
Pb Lead-Acid Battery Program
External Discharge
Charger Master
Battery Analyzer
SkyCharger app Control
DC Power
PCH-150 Power & Charging Hub
Charging Settings
System Setting
Errors and Warnings
Firmware Upgrade Notice
Optional Parts
Conformity Declaration
Warranty and Service
1
1
2
2
4
5
6
8
9
10
12
13
14
15
16
17
18
19
19
20
20
21
22
24
25
26
27
28
SKYRC D200neo Instruction Manual
1. SKYRC D200neo
Introduction
Package
Congratulations on your choice of SkyRC D200neo AC/DC Multi-Function Smart Charger. As
an update version of D200, this charger will take you on an exciting and delightful journey in
the world of model aircraft.
D200neo has independent dual ports and supports most batteries in the RC industry. As a
dual input charger, it can be used for various charging scenarios. We do not only inherit the
meticulously designed interface and powerful functions of T1000 but also add the SkyCharger
charge. So it can meet the charging requirments of different users for different scenarios in a
great extent. The new appearance design and the newly upgraded scroll button control make
the charging operation more convenient and simple.
charging a battery or using the charger in the wrong way can cause a fire or explosion.
Wishing you a pleasant experience with this charger.
SkyRC D200neo charger*1 User Manual*1 AC power Cord*1
SKYRC D200neo Instruction Manual
SKYRC D200neo 2.
Chart
DC Input 10-30V
AC Input 100-240V
Scroll to select the
parameters and start
the process
Output Port
LCD Display
Smart Ventilation
Fan External Discharge
Port
Switch Between
Port A and B
XT60 Output
Socket
Balance Port
Specification
Item Option Specification
Model D200neo
Input Voltage AC 100-240V (50/60Hz)
DC 10-30V
Input Current
SKYRC D200neo Instruction Manual
3. SKYRC D200neo
Item Option Specification
Charge Power AC 200W MAX
DC 400W*2 MAX
Discharge Power
Main port 10W*2
Balance port 37W MAX
External discharge 350W MAX
Charge Current
LiPo/LiFe/LiIon/LiHV/
NiMH/NiCd/Pb
Parallel
Discharge Current
LiPo/LiFe/LiIon/LiHV/
NiMH/NiCd/Pb
External Discharge
Balance Current LiPo/LiFe/LiIon/LiHV
Battery Types
LiPo/LiFe/LiIon/LiHV 1-6S
NiMH/NiCd 4-15S
Pb 3S/6S/12S
Working Modes
LiPo/LiFe/LiIon/LiHV Balance CHG, Charge, Discharge, Storage, Parallel
NiMH/NiCd Charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, Discharge
Pb Normal, AGM Charge, Cold Charge, Discharge
DC Power Supply Voltage 5-27V
Current
USB Type-C Output
PD
Size Lenth*Width*Height 116*110*79mm
Weight Net weight 602g
SKYRC D200neo Instruction Manual
SKYRC D200neo 4.
Warning
D200neo is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the charger by a person responsible for their safety.
Failure to exercise caution while using this product and comply with the following
warnings could result in a product malfunction, electrical issues, excessive heat, FIRE, and
ultimately injury and property damage.
Never leave charging batteries unattended during use.
Never charge batteries overnight.
Never attempt to charge dead, damaged, or wet battery packs.
Never attempt to charge a battery pack containing different types of batteries.
Never charge batteries in extremely hot or cold places or place in direct sunlight.
Never charge a battery if the cable has been pinched or shorted.
Never connect the charger if the power cord has been pinched or shorted.
Never attempt to dismantle the charger or use a damaged charger.
Never attach your charger to both an AC and a DC power source at the same time.
Always use the charger with the correct charging and discharging program.
Always use only rechargeable batteries designed for use with this type of charger.
Never use the charger on car seats, carpets, or similar surfaces.
Always operate the charger away from flammable and explosive materials.
SKYRC D200neo Instruction Manual
5. SKYRC D200neo
Standard Battery Parameters
Select the correct operating procedure in accordance with the battery parameters.
Incorrect settings may cause the battery to burn or even explode.
LiPo Lilon LiFe LiHV NiMH NiCd Pb
Nominal voltage
Max. charge
voltage
Storage voltage N/A N/A N/A
Allowable fast
charge current 1C-2C 1C-2C
Min. discharge
voltage
cell
cell
cell
cell
cell
SKYRC D200neo Instruction Manual
SKYRC D200neo 6.
Program Flow Chart
Language
Max. Input Power
Min. Input Voltage
LCD Backlight
Volume
Completion Signal
Back
> System Settings
English
450W
11.0V
Low
Low
Once
Data
USB
Safety Timer
Max. Capacity
Trickle Charge
Back
> Task Parameters
240 Minute
12000 mAh
> Factory Settings
Restore Factory Settings?
YES NO
> System Upgrade
System Upgrade?
YES NO
> System Self-checking
Self Checking
Do Not Connect the Battery!
> System Info
Hardware Version: 1.00
Firmware Version: 1.59
SN:3130303138320100001000013b010086
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH B
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
Voltage
Current
Start
Back
12.0V
15.0A
> DC Power A
1
2
3
4
5
4.15V
4.17V
4.18V
4.20V
4.19V
4.15V
6
5 m
6 m
10 m
8 m
11
m
12 m
25.13V 28m
Total
> Battery Meter A
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
6.21 A
15.99 V
DC Power
101WCV
Set 16.0
A
V
8.0
A
22.51
20.0
BLiPo / 6S /
Charge
00:30:25
10080
mAh
450 W
A
V
14.89 A
27.00 V
DC Power
403WCV
Set 27.0
A
V
15.0
A
22.51
20.0
BLiPo / 6S /
Charge
00:30:25
10080
mAh
450 W
A
V
6.21 A
15.99 V
DC Power
101WCV
Set 16.0
A
V
8.0
A B DC Power
178 W CV
8.87 A
20.00V
Set 20.0
A
V
10.0
A
1659mAh
00:12:54
LiPo / 6S / Balance CHG
4.20V
1
4.20V
2
4.20V
3
4.20V
4
4.20V
5
4.20V
6
25.15 V
7.91A
199W
A
1659mAh
00:12:54
LiPo / 6S / Balance CHG
4.20V
1
4.20V
2
4.20V
3
4.20V
4
4.20V
5
4.20V
6
25.15 V
7.91A
199W
ALiPo / 6S /
Balance CHG
00:12:54
25.15 V
7.91A
23.64V
0.41A
BLiPo / 6S /
Discharge
1659mAh
199 W
01:33:48
1973mAh
9W
ALiPo / 6S /
Balance CHG
00:12:54
25.15 V
7.91A
23.64V
0.41A
BLiPo / 6S /
Discharge
1659mAh
199 W
01:33:48
1973mAh
9W
B
1973mAh
01:33:48
LiPo / 6S / Discharge
4.04V
1
4.04V
2
4.04V
3
4.04V
4
4.04V
5
4.04V
6
24.30V
0.41A
9W Pb AGM
LiPo
Lilo
LiFe
LiHV
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
2S
3S
1S
4S
6S
5S
Balance CHG
Charge
Storage
Discharge
4.21V
4.22V
4.19V
4.18V
4.23V
4.24V
20.0A
19.9A
19.8A
SKYRC D200neo Instruction Manual
7. SKYRC D200neo
Note: The flow chart is taking one port for example as the flow chart for the two ports (Port
A & B) are identical.
Language
Max. Input Power
Min. Input Voltage
LCD Backlight
Volume
Completion Signal
Back
> System Settings
English
450W
11.0V
Low
Low
Once
Data
USB
Safety Timer
Max. Capacity
Trickle Charge
Back
> Task Parameters
240 Minute
12000 mAh
> Factory Settings
Restore Factory Settings?
YES NO
> System Upgrade
System Upgrade?
YES NO
> System Self-checking
Self Checking
Do Not Connect the Battery!
> System Info
Hardware Version: 1.00
Firmware Version: 1.59
SN:3130303138320100001000013b010086
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH B
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
Voltage
Current
Start
Back
12.0V
15.0A
> DC Power A
1
2
3
4
5
4.15V
4.17V
4.18V
4.20V
4.19V
4.15V
6
5 m
6 m
10 m
8 m
11
m
12 m
25.13V 28m
Total
> Battery Meter A
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
SYSTEM SETTING
>
>
>
>
>
>
>
>
>
>
Task Parameters
System Settings
DC Power
Power for Tire Warmer - A
Power for PD Hub - B
Battery Meter
System Self-checking
Factory Settings
System Info
System Upgrade
Back
6.21 A
15.99 V
DC Power
101WCV
Set 16.0
A
V
8.0
A
22.51
20.0
BLiPo / 6S /
Charge
00:30:25
10080
mAh
450 W
A
V
14.89 A
27.00 V
DC Power
403WCV
Set 27.0
A
V
15.0
A
22.51
20.0
BLiPo / 6S /
Charge
00:30:25
10080
mAh
450 W
A
V
6.21 A
15.99 V
DC Power
101WCV
Set 16.0
A
V
8.0
A B DC Power
178 W CV
8.87 A
20.00V
Set 20.0
A
V
10.0
A
1659mAh
00:12:54
LiPo / 6S / Balance CHG
4.20V
1
4.20V
2
4.20V
3
4.20V
4
4.20V
5
4.20V
6
25.15 V
7.91A
199W
A
1659mAh
00:12:54
LiPo / 6S / Balance CHG
4.20V
1
4.20V
2
4.20V
3
4.20V
4
4.20V
5
4.20V
6
25.15 V
7.91A
199W
ALiPo / 6S /
Balance CHG
00:12:54
25.15 V
7.91A
23.64V
0.41A
BLiPo / 6S /
Discharge
1659mAh
199 W
01:33:48
1973mAh
9W
ALiPo / 6S /
Balance CHG
00:12:54
25.15 V
7.91A
23.64V
0.41A
BLiPo / 6S /
Discharge
1659mAh
199 W
01:33:48
1973mAh
9W
B
1973mAh
01:33:48
LiPo / 6S / Discharge
4.04V
1
4.04V
2
4.04V
3
4.04V
4
4.04V
5
4.04V
6
24.30V
0.41A
9W Pb AGM
LiPo
Lilo
LiFe
LiHV
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
2S
3S
1S
4S
6S
5S
Balance CHG
Charge
Storage
Discharge
4.21V
4.22V
4.19V
4.18V
4.23V
4.24V
20.0A
19.9A
19.8A
SKYRC D200neo Instruction Manual
SKYRC D200neo 8.
Explanation of Buttons
Switch Between Port A and B
Scroll to select the menu or parameters
Press and hold for three seconds under main interface to enter into
the system setting menu
Port Swtich Button
Scroll Button
SKYRC D200neo Instruction Manual
9. SKYRC D200neo
Power and Battery Connection
1. Connecting to power source
2. Connecting the battery
*12V DC Battery or
10-30V DC Power Supply
There are two options of inputs for SKYRC D200neo, DC 10-30V and AC 100-240V.
For safety reasons, it is highly recommended to charge Lithium
batteries (LiPo, Lilon, LiFe and LiHV) using Balance CHG mode,
unless the battery comes without a balance wire.
The balance wire attached to the battery must be connected
to the charger with the black wire aligned with the negative
marking. Ensure correct polarity!
AC 100-240V power source connection.
1) LiPo Battery Connection with Balance Adapter
12V DC Battery / DC power supply connection.
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS
TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK
SKYRC D200neo Instruction Manual
SKYRC D200neo 10.
2) NiMH/NiCd or Pb Battery Connection
Charger Operation
Depending on battery type, different operations will be available. This chart shows which
operations are available for the different types of batteries the D200neo is capable of
working with.
Battery
Type
Working
Mode Description
LiPo
Lilo
LiFe
LiHV
Balance
CHG
This mode is to balance charge the lithium battery based on the charging
rate the user set. It can balance each cells of the battery.
Charge This mode is to charge the lithium battery based on the charging rate
selected.
Storage This mode is to store the battery via charging or discharging its votlage to
a specific storage value.
Discharge This mode is to dishcarge the lithium battery based on the discharging rate
selected.
Parallel This mode is to parallel charge the battery with a higher charge rate of up
SKYRC D200neo Instruction Manual
11. SKYRC D200neo
Battery
Type
Working
Mode Description
NiMH
NiCd
Charge This mode is to charge the NiMH/NiCd battery based on the charging rate
selected.
Re-Peak
a row automatically. This is good for confirming the battery is fully charged.
Cycle_C_D 1 to 5 cyclic and continuous process of charge>discharge is operable for
refreshing and restoring the performance of NiMH/NiCd batteries.
Cycle_D_C 1 to 5 cyclic and continuous process of discharge>charge is operable for
refreshing and restoring the performance of NiMH/NiCd batteries.
Discharge This mode is to discharge the NiMH/NiCd battery based on the discharging
rate selected.
Pb
Normal This mode is to charge the Pb battery based on the charging rate selected.
AGM
Charge
This mode is to charge the AGM battery based on the charging rate
selected.
Cold
Charge
This mode is to charge the Pb battery under a low temperature based on
the charging rate selected.
Discharge This mode is to discharge the Pb battery based on the discharging rate
selected.
SKYRC D200neo Instruction Manual
SKYRC D200neo 12.
Lithium Battery Program(LiPo/LiFe/Lilon/LiHV)
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
LiPo
Lilo
LiFe
LiHV
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
3S(11.1V)
Balance CHG
CH A
Current 20.0A
2S
3S
1S
4S
6S
5S
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
Balance CHG
Charge
Storage
Discharge
The following flowchart is a reference to set the program manually.
ENTER Charge Setting
On the main interface, press the
scroll button to enter CHARGE
SETTING.
Condition Select
Scroll to Condition, call out the
menu and set the delta voltage.
Battery Type Select
Press scroll button to call out
the Battery Type menu, and
scroll to select LiPo.
Charge/Discharge
Current Select
Scroll to Charge/Discharge
Current, call out the menu and
scroll to select the working
current.
Battery Cell Select
Scroll to Battery Cell, call out
the menu and scroll to select
the correct battery cells.
Start
Press scroll button to confirm
and initiate the program.
Stop
Press scroll button to stop the
program.
Task Select
Scroll to Task, call out the
menu and scroll to select the
working mode.
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
4.21V
4.22V
4.19V
4.18V
4.23V
4.24V
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
2S(7.4V)
Balance CHG
CH A
Current 20.0A
20.0A
19.9A
19.8A
A
1659mAh
00:12:54
LiPo / 6S / Balance CHG
4.20V
1
4.20V
2
4.20V
3
4.20V
4
4.20V
5
4.20V
6
25.15 V
7.91A
199W
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
Battery Type
Condition
Battery Cell
Task
Start
Back
CHARGE SETTING
LiPo
4.2V
6S(22.2V)
Balance CHG
CH A
Current 20.0A
SKYRC D200neo Instruction Manual
13. SKYRC D200neo
Parallel Charge(LiPo/LiFe/Lilon/LiHV)
• The Parallel mode is available only for lithium batteries, which cannot be used for other
types of batteries.
• To avoid short circuits, always connect the charge leads to the charger first, and then to
the battery. Reverse the Sequence when disconnecting the pack.
1. Select the correct battery type (LiPo/LiFe/LiIon/LiHV);
2. Select the option of Parallel charge;
3.
4. Start the program after setting up;
• Ensure that AC and DC power is not connected simultaneously;
• With the single port, charging power is 200W; with the dual ports, charging power is intelligently
distributed;
• Do not connect the battery before the charger powered on.
• The parallel charge cable is sold separately.
Notice:
SKYRC D200neo Instruction Manual
SKYRC D200neo 14.
NiMH/NiCd Battery Program
ENTER Charge Setting
On the main interface, press the
scroll button to enter CHARGE
SETTING.
Condition Select
Scroll to Condition, call out the
menu and set the delta voltage.
Battery Type Select
Press scroll button to call out
the Battery Type menu, and
scroll to select NiMH.
Charge/Discharge
Current Select
Scroll to Charge/Discharge
Current, call out the menu and
scroll to select the working
current.
Battery Cell Select
Scroll to Battery Cell, call out
the menu and scroll to select
the correct battery cells.
Start
Press scroll button to confirm
and initiate the program.
Stop
Press scroll button to stop the
program.
Task Select
Scroll to Task, call out the
menu and scroll to select the
working mode.
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
LiHV
LiFe
Lilo
NiMH
NiCd
PB
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
5S
4S
3S
6S
7S
8S
9S
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
Charge
Re-Peak
CYCLE_C_D
CYCLE_D_C
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
-5mV
-4mV
-3mV
-6mV
-7mV
-8mV
-9mV
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
2.9A
2.8A
2.7A
3.0A
3.1A
3.2A
3.3A
Battery Type
Condition
Battery Cell
Task
Charge Current
Temp Cut-off
Start
Back
CHARGE SETTING
NiMH
-6 mV
6S(7.2V)
Charge
3.0A
50°C
CH A
SKYRC D200neo Instruction Manual
15. SKYRC D200neo
Pb Lead-Acid Battery Program
ENTER Charge Setting
On the main interface, press the
scroll button to enter CHARGE
SETTING.
Condition Select
Scroll to Condition, call out the
menu and set the delta voltage.
Battery Type Select
Press scroll button to call out
the Battery Type menu, and
scroll to select PB.
Charge/Discharge
Current Select
Scroll to Charge/Discharge
Current, call out the menu and
scroll to select the working
current.
Battery Cell Select
Scroll to Battery Cell, call out
the menu and scroll to select
the correct battery cells.
Start
Press scroll button to confirm
and initiate the program.
Stop
Press scroll button to stop the
program.
Task Select
Scroll to Task, call out the
menu and scroll to select the
working mode.
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
PB
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
PB
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
NiMH
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
LiHV
LiFe
Lilo
NiMH
NiCd
PB
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
NiMH
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
3S
6S
12S
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
NiMH
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
Normal
AGM Charge
Cold Charge
Discharge
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
NiMH
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
1.80V
1.90V
2.00V
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
NiMH
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
4.9A
4.8A
4.7A
5.0A
5.1A
5.2A
Battery Type
Condition
Battery Cell
Task
Current
Start
Back
CHARGE SETTING
PB
2.45V
6S(12.0V)
AGM Charge
5.0A
CH A
SKYRC D200neo Instruction Manual
SKYRC D200neo 16.
External Discharge
with BD350 discharger connected.
1. Upon connecting the power supply, D200neo automatically powers up and enters the
main interface;
2. Connect BD350 discharger to D200neo;
3. Connect the battery to D200neo on Port A;
LiPo Battery
SKYRC D200neo Instruction Manual
17. SKYRC D200neo
Charger Master
• BD350 discharger is not included and must be purchased separately.
• External discharge is available only on Port A;
current;
5. Start the program after setting up.
Notice:
D200neo is capable of charging and discharging through the computer with both Windows/
MacOS. Various parameters, including charge time and capacity, can be displayed visually, as
well as charge current and voltage in a curve.
1. Download the latest Charger Master onto your desktop. Unzip and open it after
downloading;
2. Power on your D200neo;
3. Connect D200neo to your computer via a USB type-C cable (It's recommended to select
Data function under the USB menu in the system setting before connecting to PC. )
On the top left of the Charger Master, choose the option of Charge; Set the parameters
on the corresponding ports. Click to start the program after setting up.
4.
PC Interface
SKYRC D200neo Instruction Manual
SKYRC D200neo 18.
Battery Analyzer
D200neo is capable of analyzing the battery performance with BD350 discharger connected,
helping players choose a more suitable battery for competitions and gain better achievements.
Up to ten groups of test data are visualized as curves, which are clear at a glance for players.
1. Launch the Charger Master and select Battery Analyzer on the top left;
3. Click New Test to start the testing after setting up;
4. When the first test completes, click Append Test to start the second test. The third
and further tests follow suit.
Select
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Skyrc D200neo Charger is an AC/DC Multi-Function Smart Charger with independent dual ports and supports most batteries in the RC industry. It can be used for various charging scenarios as a dual input charger. It supports Lithium batteries (LiPo/LiFe/Lilon/LiHV), NiMH/NiCd batteries, and Pb Lead-Acid batteries. D200neo has a meticulously designed interface and powerful functions. It features a newly upgraded scroll button control and SkyCharger App control. It also has a DC Power Supply and USB Type-C PD/QC3.0 Output, allowing you to charge your devices conveniently.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Skyrc SK-100196 D200 neo AC DC Multi Function Smart Charger User manual
-
-
-
-
-
-
Skyrc S60 User manual
-
-
-
Skyrc Ultimate 1000W User manual
Other documents
-
Satechi S09OJ3J24Z Operating instructions
-
HiTEC RDX2 800 AC/DC Multi-Function Smart Charger User manual
-
-
ToolKitRC C3 Compact AC Balance Charger User manual
-
-
SINDOX OJD-60 User manual
-
banggood H52V215 User guide
-
EcoFlow WAVE 2 Troubleshooting guide
-
-
ToolKitRC Q4AC User manual
