Editor/Navigator Repair Label
for
EV3000 and EV3001 Controllers
Cumberland • 1004 E. Illinois St. • Assumption, IL 62510 ∙ Phone 1-217-226-4421 • Fax 1-217-226-4420
Part No. 4802-0162 rev 1-2015 Page 1 of 1
IMPORTANT!
Alignment of the indicator viewing windows
is the most important first step.
Alignment is easier when most of the
indicators are ON.
Apply the label first to the viewing window
area then apply sweeping pressure (top to
bottom) to work the label gradually outward
one side at a time.
Turn power off before wiping across the
Editor buttons to prevent accidental setting
changes.
IMPORTANT!
SURFACE PREPARATION:
Ensure the label surface is clean and dry before applying the
repair label.
Remove dust and dirt from the label surface. DO NOT use
harsh cleaners.
To remove surface oils and improve adhesion, the surface
must be wiped clean with plain rubbing alcohol and wiped dry.
Do Not apply the label to a wet or damp surface.
IMPORTANT!
Prevent excessive contact with the adhesive on the back
side of the label.
4501-6151
Repair
Label
/
