Topeak TAB-RPX Owner's manual

Topeak
Brand
Topeak
Model
TAB-RPX
Category
Motor vehicle accessories & components
Type
Owner's manual

Topeak TAB-RPX is a bicycle pump designed for quick and easy inflation of tires. It is compatible with both Presta and Schrader valves and can inflate tires up to 120 psi. The pump features an integrated dust cap to keep the valve clean and a built-in gauge to help you monitor the tire pressure. The TAB-RPX is also equipped with a flexible hose that makes it easy to reach the valve stem, even on hard-to-reach tires. With its compact size and lightweight design, the TAB-RPX is the perfect pump to take with you on your rides.

Here are some of the key features of the Topeak TAB-RPX:

  • Compatible with both Presta and Schrader valves

Topeak TAB-RPX is a bicycle pump designed for quick and easy inflation of tires. It is compatible with both Presta and Schrader valves and can inflate tires up to 120 psi. The pump features an integrated dust cap to keep the valve clean and a built-in gauge to help you monitor the tire pressure. The TAB-RPX is also equipped with a flexible hose that makes it easy to reach the valve stem, even on hard-to-reach tires. With its compact size and lightweight design, the TAB-RPX is the perfect pump to take with you on your rides.

Here are some of the key features of the Topeak TAB-RPX:

  • Compatible with both Presta and Schrader valves
* Recommended to use Topeak threaded CO2 cartridges
* Please read all instructions before first use
After installation, cut the
strap for proper length.
AIRBOOSTER RACE POD X
GB
User's Guide
HOW TO DISASSEMBLE AIRBOOSTER RACE POD X HOW TO STORE CO2 CARTRIDGE
2-year Warranty: All mechanical components against manufacturer
defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales
receipt. Items returned without a sales receipt will assume that
the warranty begins on the date of manufacture. All warranties
will be void if the product is damaged due to user crash, abuse,
system alteration, modification, or used in any way not intended
as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
Copyright © Topeak, Inc. 2014 M-TAB-RPX-GB 11/14
WARRANTY
1
12
12 3
2 3
Release Hook and loop fastener. Remove the shuttle lever. Remove 16g Threaded CO2
cartridge or AirBooster inflator.
If using the AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the rubber grommet inside
the AirBooster inflation head to return to its original position. Otherwise, a gas leak may occur and prevent proper inflation.
Tighten the CO2 cartridge before using CO2 inflation function. Failure to do so will cause improper operation and may cause injury.
DO NOT remove CO2 cartridge if it is still charged with gas.
Completely discharge the CO2 cartridge before removal.
When opening the CO2 cartridge, point the AirBooster inflator head
away from yourself and others.
DO NOT use AirBooster Inflator if any part is cracked or broken.
DO NOT expose the CO2 cartridge to heat, or store at temperatures
above 120˚F (49˚C), or store in enclosed vehicles.
Make sure to wear gloves when inflating to avoid injury.
The barrel and CO2 cartridge may become extremely cold / frosty
when the CO2 gas is expelled. DO NOT try to unscrew the AirBooster
inflation head until it has warmed sufficiently to touch.
Keep out of reach of children.
16g Threaded
CO2 cartridge
(2 pieces)
(5 pieces)
Art no. TCOT-2
TCOT-5
1.
2.
3.
4.
5.
6.
7.
8.
9.
WARNING
SPARE PARTS
Integrated dust cap
AirBooster inflator
16g Threaded CO2 cartridge x 2 pcs (included)
AirBooster inflation head
Topeak Shuttle lever 1.1 (included)
Bracket with mounting strap
1.
2.
3.
4.
5.
6.
5 6
Storage Engagement
(Engaged side
with Dust Cap)
Dust Cap
Storage Engagement
(with CO2 cartridge
puncture pin inside
and dust cap)
2
1
3
5
4
3
HOW TO USE CO2 CARTRIDGE
Presta Valve
Schrader Valve
Fits
ø 27.2 mm ~ ø 44 mm
Fits Perimeter
114 mm ~ 155 mm
Thread-in CO2 cartridge. Push inflation
head to inflate.
Install and thread-in inflation
head to Schrader valve.
Push inflation
head to inflate.
After each inflation, make sure all CO2
gas has been discharged by pushing the
AirBooster inflating head several times.
To avoid possible personal injury
and damage to bike and / or tool,
insure to disengage CO2 inflator
properly after use by unthreading
inflation head in correct direction.
NOTE
Thread-in CO2 cartridge.
O-ring
Replacement Kit
Art no. TRK-HR01
The valve head o-ring is subject to wear and
may cause air leakage over time. Periodically
inspect and replace o-ring if needed.
2
6
ROUND TUBE AERO TUBE
  • Page 1 1

Topeak TAB-RPX Owner's manual

Topeak
Brand
Topeak
Model
TAB-RPX
Category
Motor vehicle accessories & components
Type
Owner's manual

Topeak TAB-RPX is a bicycle pump designed for quick and easy inflation of tires. It is compatible with both Presta and Schrader valves and can inflate tires up to 120 psi. The pump features an integrated dust cap to keep the valve clean and a built-in gauge to help you monitor the tire pressure. The TAB-RPX is also equipped with a flexible hose that makes it easy to reach the valve stem, even on hard-to-reach tires. With its compact size and lightweight design, the TAB-RPX is the perfect pump to take with you on your rides.

Here are some of the key features of the Topeak TAB-RPX:

  • Compatible with both Presta and Schrader valves
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents