Nielsen CT2345 Original Instructions

Brand
Nielsen
Model
CT2345
Type
Original Instructions
DRAWINGA
AIR JACK 3 BAGS WITH LONG HANDLE BASE
CT2345
ORIGINAL INSTRUCTIONS
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic
safety and health requirements of the EC Directive based on its design and
type, as brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: AIR JACK 3 BAGS WITH LONG HANDLE BASE
Model: CT2345
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
Harmonized standards
EN 1494, EN ISO 12100
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2016-06-02
This air jack is composed of air bag, upper and lower flange, base plate,
handle, air valve etc.
This air jack is a multi-purpose air tool can be widely used to repair cars,
machine equipments, install and debug machine tool.
OPERATING INSTRUCTIONS
Connect the air fitting to air inlet fitting, press air inlet side of the air valve to
lift the air jack, press the air outlet side of the air valve to lower the air jack.
SAFETY INSTRUCTIONS AND WARNINGS
1. DO NOT exceed this rated capacity.
2. DO NOT adjust the safety valve.
3. DO NOT stand under the workpiece when the jack is working.
Lifting capacity: 2.2Ton
Minimum height: 150mm
Maximum height: 435mm
Air pressure: 120psi
Temperture:-10 - 40oC
PART LISTS
  • Page 1 1
  • Page 2 2

Nielsen CT2345 Original Instructions

Brand
Nielsen
Model
CT2345
Type
Original Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents