Crivit Sports 10-LD3151 Owner's manual

Brand: Crivit Sports

Model: 10-LD3151

Category: Watches

Type: Owner's manual

Crivit Sports 10-LD3151 is a feature-rich bicycle computer that provides valuable data and insights to enhance your cycling experience. With its advanced capabilities, it tracks speed, distance, time, calories burned, and fat burned, helping you monitor your progress and performance. Additionally, it includes a thermometer, stopwatch, and service reminder, making it a versatile tool for various cycling scenarios.



10-LD3151

Edition 1





....................................................................- 1 -

Preliminary note............................................................- 1 -

Important safety information..........................................- 1 -

Features........................................................................- 3 -

Scope of delivery ..........................................................- 4 -

Display description and function buttons .......................- 5 -

Setup ............................................................................- 6 -

Light..............................................................................- 6 -

Speed setting................................................................- 6 -

Basic settings................................................................- 6 -

Using the bicycle computer .........................................- 10 -

Time............................................................................- 11 -

Total distance for bicycles 1 and 2 ..............................- 11 -

Total distance for both bicycles ...................................- 11 -

Total time for bicycles 1 and 2.....................................- 12 -

Total time (both bicycles) ............................................- 12 -

Trip distance ...............................................................- 12 -

Maximum speed..........................................................- 12 -

Average speed............................................................- 13 -

Trip time......................................................................- 13 -

Thermometer ..............................................................- 13 -

Stop watch..................................................................- 13 -

Current calorie consumption .......................................- 14 -

Calorie counter............................................................- 14 -

Fat burn in grams........................................................- 14 -

Distance counter (forward/reverse) .............................- 15 -

Trip timer (forward/reverse).........................................- 15 -

Scan mode SCAN.......................................................- 16 -

Service reminder.........................................................- 16 -

Selection of bicycle 1 or bicycle 2................................- 17 -

Battery replacement (30-second memory) ..................- 17 -

Easy mode, advanced mode and custom menus

for easy mode .............................................................- 18 -

Energy saving mode ...................................................- 18 -

Problem solving ..........................................................- 19 -

Disposal......................................................................- 20 -

Declaration of conformity information ..........................- 20 -

Warranty .....................................................................- 21 -

- 1 -











Bicycle Computer, wireless

Preliminary note

Please read the instruction manual before using the

product for the first time- even if you are experienced

at using electronic equipment. Please take special

care when reading the chapter "Important safety

information". Keep this instruction manual so you

may use it a reference material in the future. If you

sell or give this product to someone else it is very

important to also include this manual.

Important safety information

Cleaning instructions

Clean the product with a soft, dry and lint-free cloth.

A glasses cleaning cloth is ideal.

- Batteries

Insert the batteries/ rechargeable batteries in the

correct polarity. Don’t try to recharge non-

rechargeable batteries and under no circumstances

throw them into fire. Danger of explosion.

Do not use unequal batteries (old and new, Alkaline

and carbon, etc.) simultaneously. If you will not use

the device for a long time, remove the batteries and

store the device in a dry and dust-free place.

Improper use of batteries may cause an explosion or

leakage. If the batteries have leaked, use gloves and

clean the appliance thoroughly with a dry cloth.

- 2 -

- Electrical devices should not be in the hands of

children

Never let children use electrical devices

unsupervised. Children can’t always recognize the

possible dangers properly. Batteries/ rechargeable

batteries can be life threatening when swallowed.

Store the batteries where they cannot be reached by

small children. If a battery is swallowed, medical aid

must be sought immediately.

Also keep the packaging foils away from children.

Danger of suffocation.

Intended use

This electronic appliance is intended for use as a

bicycle computer. Any other use or modification of

the electronic appliance does not comply with the

intended uses. The manufacturer is not liable for

damages caused by improper use or misuse. The

device is not intended for commercial use.

- 3 -

Features

• Memory for 2 bicycles

• Service interval selectable

• Speed display (0-99,9km/h)

• Average speed (0-99,9km/h)

• Maximum speed (0-99,9km/h)

• Speed comparison

• Speed tendency (Accelerating or slowing down)

• Trip timer (max 9:59:59)

• Trip timer (forward counting)

• Trip timer (reverse counting)

• Time

• Stop watch

• Distance counter (0-999,99km/m)

• Distance counter (forward counting)

• Distance counter (reverse counting)

• Distance counter for 2 bicycles

• Total distance and total time

• Memory function for Odometer

• Scan feature for alternating display

• Thermometer with max. memory

• Thermometer with min. memory

• Celsius or Fahrenheit selectable

• Kilometers or miles selectable

• Fat burn counter

• Calorie counter

• Standby feature

• Auto start

• Easy mode selectable

• Advanced mode selectable

• Backlight

- 4 -

Scope of delivery

Please note: Check the scope of delivery after

purchase. Please ensure that all parts are

included and undamaged.

1. Info sheet „Installation“

2. Bicycle computer

3. Magnet

4. Mount

5. 2x Batteries 3V CR2032

6. Reusable cable ties (4 pcs.)

7. Sensor

max.30˚

- 5 -

Display description and function

buttons

1. Selected bicycle (1 or 2)

Speed tendency: acceleration (turning to the

right) or slowing down (turning to the left)

2. Service interval reached

3. Scan (alternating display)

4. Sub feature display

5. Main feature display

6. Battery low indicator

7. Speed comparison: faster or slower than average

speed

A, B, C Function buttons

- 6 -

Setup

The setup and installation of the bicycle computer is

described on the information sheet „Installation“.

After installing the bicycle computer, please remove

the protective foil from the display and press any key

to start the computer.

Light

Press C briefly to activate the light temporarily.

Speed setting

When setting numerical values, press and hold B to

use the speed setting feature.

Basic settings

The setting mode for basic settings can be reached

by inserting a battery or performing a reset. To

perform a reset, press and hold A and B together

until {{-----}} appears. Now press and hold B.

The language selection will appear on the display.

Select a language (Englisch, German, French,

Dutch, Italian or Spanish) by pressing B. Confirm

your selection by pressing A.

- 7 -

The display will now show the mode for advanced

users

ADVANCE / FORTGES / AVANCE

ERVAREN / AVANZATO / FACIL

Or for beginners

EASY / EINFACH / FACILE

BEGINNER / FACILE / AVANCADO

Select a mode by pressing B. Confirm your selection

by pressing A.

Important: In easy mode only the following features

are available:

Speed, average speed, trip distance and trip timer.

In advanced mode all features are available and

settings for 2 bicycles can be stored.

C1 will now appear on the display. Set the

circumference of your tire in mm (see “Calculating

tire circumference”). Press B to set each digit and

press A to confirm each setting.

If you have selected advanced mode, you may now

enter the tire circumference for an additional bicycle.

- 8 -

Calculating tire circumference

Tire circumference can be easily calculated by

multiplying the tire diameter with 3.1416.

The tire circumference of some standard tire types is

listed in the following table.

Diameter Circumference

20" 1598

22" 1759

24" 1916

26" (650A) 2073

26,5" (Tubular) 2117

26,6" (700x25C) 2124

26,8" (700x28C) 2136

27" (700x32C) 2155

28" (700B) 2237

ATB 24"x1,75 1888

ATB 26x1,4 1995

ATB 26x1,5 2030

ATB 26x1,75 2045

ATB 26x2 (650B) 2099

27"x1 2138

27"x1 1/4 2155

The display now shows the unit of distance

SET KM / EINST KM / AJUSTE KM

SET KM / REG KM / AJUST KM

Select the unit miles (M) or Kilometres (KM) by

pressing B. Confirm your setting by pressing A.

- 9 -

The display now shows the age selection

SET AGE / ALTER / AGE

LEEFTIJD / ETA / EDAD

Set your age in years. Press B to set each digit and

pres A to confirm each setting.

The display now shows the unit of weight selection

SET KG / EINST KG / AJUSTE KG

SET KG / REG KG / AJUST KG

Select the unit Kilogram (KG) or Pounds (LB) by

pressing B. Confirm your selection by pressing A.

The display now shows the weight selection

SET WT / GEWICHT / POIDS

GEWICHT / PESO / PESO

Set your weight in the selected unit. Press B to set

each digit and pres A to confirm each setting.

The display will now show the 12 or 24 hour time

format selection

SET CLK / EINST U / REG MONT

UUR INST / IMP / AJUSTE H

Select your preferred format by pressing B. Confirm

your selection by pressing A.

Set the hours and minutes in the same way.

- 10 -

The display will now show the service interval

selection

SERVICE / SERVICE / SERVICE

SERVIZIO / SERVIZIO / SERVICIO

Set the interval by pressing B. Confirm your selection

by pressing A.

Possible settings are 200, 400, 600 or 800

Kilometers or Miles

If you selected advanced mode you may now select

the service interval for an additional bicycle.

The display will now show the temperature unit

selection. Select the temperature unit Celsius (°C) or

Fahrenheit (°F) by pressing B. Confirm your selection

by pressing A.

Using the bicycle computer

Press B to select a feature mode of the computer.

The lower row of the display will show the name of

the mode.

Press A to reach the subfeatures of each mode.

Press and hold A to reach the setting mode of a

feature or reset stored values.

- 11 -

Time

CLOCK / UHRZEIT / HEURE

TIJD / ORARIO / HORA

Press and hold A for 3 seconds to enter time setting

mode (see basic settings)

Total distance for bicycles 1 and 2

TOTODO / KM-RAD / KM-VELO

KMBIKE / KMBICI / KMBICI

Press and hold A for 3 seconds to enter setting mode

for tire diameter (see basic settings).

After tire diameter setting the stored values for the

odometer can be changed.

Total distance for both bicycles

TOTALODO / GESAMTKM / DIST-TOT

TOTAALKM / KM-TOTAL / KM-TOTAL

Press and hold A for 3 seconds to enter tire

circumference setting (see basic settings).

After tire diameter setting the stored values for the

odometer can be changed.

Press B to set the digits and confirm your settings by

pressing A.

- 12 -

Total time for bicycles 1 and 2

TOT-TM / TM-RAD / TMVELO

TMBIKE / TMBICI / TMBICI

Press and hold A for 3 seconds to change the stored

value.

Press B to adjust digits and press A to confirm each

digit.

Total time (both bicycles)

TOTAL-TM / GESAMTTM / TIME-TOT

TOTAALTM / TM-TOTAL / TM-TOTAL

Trip distance

TRIPDIST / TAGES-KM / DISJOUR

DAG-KM / KM-GIORN / KM-DIA

Press and hold A for 3 seconds to reset trip distance,

trip time and average speed.

Maximum speed

MAXSPEED / MAX-KMH / VIT-MAX

MAX-KM/H / V-MASSIM / V-MAXIM

Press and hold A for 3 seconds to reset the stored

maximum speed.

- 13 -

Average speed

AVGSPEED / DURCH-KM / VITMOYEN

GEM-KM/H / V-MEDIA / V-MEDIA

The average speed can be reset in the menu „trip

distance“.

Trip time

TRIPTIME / FAHRZEIT / TEMPPARC

RIT-TIJD / TEMP-GIR / TIEMP-TR

The trip time can be reset in the menu „trip distance“.

Thermometer

TEMP / GRAD / TEMP

TEMP / TEMP / TEMP

Press and hold A for 3 seconds to reach temperature

unit selection (°C or °F) (see basic settings)

Press A to show the maximum (HI) and minimum

(LO) values.

Press and hold A while viewing (HI) or (LO) to reset

the selected value.

Stop watch

STPWATCH / STOPPUHR / CHRONO

STPWATCH / CRONOMET / CRONOMET

Press A to start or stop the stop watch. Press and

hold A to reset the stop watch.

- 14 -

Current calorie consumption

CAL RATE / KAL RATE / CONS CAL

CAL CONS / CAL CONS / CAL RATE

Calorie consumption at the current speed is

displayed.

Calorie counter

CALORIE / KALORIE / CALORIE

CALORIE / CALORIA / CALORIA

Press and hold A for 3 seconds to reset the calorie

counter.

Fat burn in grams

FAT-BURN / FETT / GRAS

VET / GRASSO / GRASA

Press and hold A for 3 seconds to reset the fat burn

counter.

- 15 -

Distance counter (forward/reverse)

KM / KM / KM

Press and hold A for 3 seconds to reach the setting

mode for the distance counter.

The symbol for the forward counter (+) or reverse

counter (-) will appear. Press B to select a counter

and confirm your setting by pressing A.

You can now set the desired distance. Press B to set

each digit and press A to confirm each setting.

After the set distance has been covered the display

will blink. Press A to stop the blinking.

Trip timer (forward/reverse)

TIME / TIMER / TIMER

TIMER / TIME / TIMER

Press and hold A for 3 seconds to reach the setting

mode for the trip timer.

The symbol for the forward counter (+) or reverse

counter (-) will appear. Press B to select a counter

and confirm your setting by pressing A.

You can now set the desired riding time. Press B to

set each digit and press A to confirm each setting.

After the set riding time has been completed the

display will blink. Press A to stop the blinking.

- 16 -

Scan mode SCAN

In scan mode SCAN will appear on the display.

The trip distance

TRIPDIST / TAGES-KM / DISJOUR

DAG-KM / KM-GIORN / KM-DIS

maximum speed

MAXSPEED / MAX-KMH / VITMAX

MAX-KM/H / V-MASSIM / V-MAXIM

average speed

AVGSPEED / DURCH-KM / VITMOYEN

GEM-KM/H / V-MEDIA / V-MEDIA

and trip timer

TRIPTIME / FAHRZEIT / TEMPPARC

RIT-TIJD / TEMP-GIR / TIEMP-TR

will alternate on the display.

Service reminder

When the set service interval is reached the service

reminder will blink on the display. Press A to reset

the service reminder.

- 17 -

Selection of bicycle 1 or bicycle 2

Press A and B together briefly to load the settings for

bicycle 1 or 2.

Please note: All stored values except total distance

will be reset.

Battery replacement (30-second

memory)

Before changing the battery, please press and hold A

and B together. {{-----}} will appear on the

display. If a new battery is inserted within 30

seconds, the stored values will remain intact. Press

and hold A.

Please dispose of your batteries properly in

containers especially set up at retailers. Batteries do

not belong in household waste.

- 18 -

Easy mode, advanced mode and

custom menus for easy mode

Press and hold C for 3 seconds.

The display will now show the mode for advanced

users

ADVANCE / FORTGES / AVANCE

ERVAREN / AVANZATO / FACIL

or for beginners

EASY / EINFACH / FACILE

BEGINNER / FACILE / AVANCADO

Select the desired mode by press B.

You can now confirm your selection by pressing A or

customize the easy mode. To customize easy mode

select the mode by pressing B, then press and hold

Press B to activate (ON) or deactivate (OFF) the

clock feature. Confirm your setting by pressing A.

The other features can be activated or deactivated in

the same way.

Energy saving mode

If the bicycle computer was not used for 5 minutes it

will automatically enter standby mode. Press any

button to reactivate the computer.

Page is loading ...

Crivit Sports 10-LD3151 Owner's manual

Brand: Crivit Sports

Model: 10-LD3151

Category: Watches

Type: Owner's manual

Download PDF

report

Crivit Sports 10-LD3151 Owner's manual

Crivit Sports 10-LD3151 Owner's manual

Related papers

Other documents