Crivit 56074 User manual

Category
Watches
Type
User manual

Crivit 56074 features a large easy to read display with 5 function buttons to navigate its intuitive interface. This multipurpose bike computer can store data for up to two bicycles, allowing you to easily switch between bikes without losing track of important metrics. Monitor your speed, distance, time, and calories burned with precision, and stay informed about the ambient temperature with the integrated thermometer. Crivit 56074 is a versatile training companion, providing valuable insights into your performance and helping you achieve your fitness goals.

Crivit 56074 features a large easy to read display with 5 function buttons to navigate its intuitive interface. This multipurpose bike computer can store data for up to two bicycles, allowing you to easily switch between bikes without losing track of important metrics. Monitor your speed, distance, time, and calories burned with precision, and stay informed about the ambient temperature with the integrated thermometer. Crivit 56074 is a versatile training companion, providing valuable insights into your performance and helping you achieve your fitness goals.


10-LD3071
Edition 1
 ....................................................................- 1 -
Preliminary note..........................................................- 1 -
Important safety information........................................- 1 -
Features......................................................................- 3 -
Scope of delivery ........................................................ - 4 -
Display description and function buttons ..................... - 5 -
Setup ..........................................................................- 6 -
Light............................................................................ - 6 -
Speed setting.............................................................. - 6 -
Basic settings..............................................................- 6 -
Using the bicycle computer ....................................... - 10 -
Time..........................................................................- 11 -
Total distance for bicycles 1 and 2 ............................ - 11 -
Total distance for both bicycles ................................. - 11 -
Total time for bicycles 1 and 2................................... - 12 -
Total time (both bicycles) ..........................................- 12 -
Trip distance ............................................................. - 12 -
Maximum speed........................................................- 12 -
Average speed..........................................................- 13 -
Trip time....................................................................- 13 -
Thermometer ............................................................ - 13 -
Stop watch................................................................- 13 -
Current calorie consumption .....................................- 14 -
Calorie counter..........................................................- 14 -
Fat burn in grams......................................................- 14 -
Distance counter (forward/reverse) ...........................- 15 -
Trip timer (forward/reverse).......................................- 15 -
Scan mode SCAN.....................................................- 16 -
Service reminder.......................................................- 16 -
Selection of bicycle 1 or bicycle 2..............................- 17 -
Battery replacement (30-second memory) ................- 17 -
Easy mode, advanced mode and custom menus
for easy mode ...........................................................- 18 -
Energy saving mode ................................................. - 18 -
Problem solving ........................................................ - 19 -
Disposal....................................................................- 20 -
Warranty ...................................................................- 21 -
- 1 -



Bicycle Computer
Preliminary note
Please read the instruction manual before using the
product for the first time- even if you are experienced
at using electronic equipment. Please take special
care when reading the chapter "Important safety
information". Keep this instruction manual so you
may use it a reference material in the future. If you
sell or give this product to someone else it is very
important to also include this manual.
Important safety information
Cleaning instructions
Clean the product with a soft, dry and lint-free cloth.
A glasses cleaning cloth is ideal.
- Batteries
Insert the batteries/ rechargeable batteries in the
correct polarity. Don’t try to recharge non-
rechargeable batteries and under no circumstances
throw them into fire. Danger of explosion.
Do not use unequal batteries (old and new, Alkaline
and carbon, etc.) simultaneously. If you will not use
the device for a long time, remove the batteries and
store the device in a dry and dust-free place.
Improper use of batteries may cause an explosion or
leakage. If the batteries have leaked, use gloves and
clean the appliance thoroughly with a dry cloth.
- 2 -
- Electrical devices should not be in the hands of
children
Never let children use electrical devices
unsupervised. Children can’t always recognize the
possible dangers properly. Batteries/ rechargeable
batteries can be life threatening when swallowed.
Store the batteries where they cannot be reached by
small children. If a battery is swallowed, medical aid
must be sought immediately.
Also keep the packaging foils away from children.
Danger of suffocation.
Intended use
This electronic appliance is intended for use as a
bicycle computer. Any other use or modification of
the electronic appliance does not comply with the
intended uses. The manufacturer is not liable for
damages caused by improper use or misuse. The
device is not intended for commercial use.
- 3 -
Features
Memory for 2 bicycles
Service interval selectable
Speed display (0-99,9km/h)
Average speed (0-99,9km/h)
Maximum speed (0-99,9km/h)
Speed comparison
Speed tendency
(Accelerating or slowing down)
Trip timer (max 9:59:59)
Trip timer (forward counting)
Trip timer (reverse counting)
Time
Stop watch
Distance counter (0-999,99km/m)
Distance counter (forward counting)
Distance counter (reverse counting)
Distance counter for 2 bicycles
Total distance and total time
Memory function for Odometer
Scan feature for alternating display
Thermometer with max. memory
Thermometer with min. memory
Celsius or Fahrenheit selectable
Kilometers or miles selectable
Fat burn counter
Calorie counter
Standby feature
Auto start
Easy mode selectable
Advanced mode selectable
Backlight
- 4 -
Scope of delivery
Please note: Check the scope of delivery after
purchase. Please ensure that all parts are
included and undamaged.
1. Info sheet „Installation“
2. Bicycle computer
3. Magnet
4. Wired sensor with mount
5. Battery 3V CR2032
6. Cable ties (6 pcs.)
- 5 -
Display description and function
buttons
1. Selected bicycle (1 or 2)
Speed tendency: acceleration (turning to the
right) or slowing down (turning to the left)
Service interval reached
2. Scan (alternating display)
3. Subfeature display
4. Main feature display
5. Battery low indicator
6. Speed comparison: faster or slower than average
speed
A, B, C Function buttons
- 6 -
Setup
The setup and installation of the bicycle computer is
described on the information sheet „installation“.
After installing the bicycle computer, please remove
the protective foil from the display and press any key
to start the computer.
Light
Press C briefly to activate the light temporarily.
Speed setting
When setting numerical values, press and hold B to
use the speed setting feature.
Basic settings
The setting mode for basic settings can be reached
by inserting a battery or performing a reset. To
perform a reset, press and hold A and B together
until {{-----}} appears. Now press and hold B.
The language selection will appear on the display.
Select a language (Englisch, German, French,
Dutch, Italian or Spanish) by pressing B. Confirm
your selection by pressing A.
- 7 -
The display will now show the mode for advanced
users
ADVANCE / FORTGES / AVANCE
ERVAREN / AVANZATO / FACIL
Or for beginners
EASY / EINFACH / FACILE
BEGINNER / FACILE / AVANCADO
Select a mode by pressing B. Confirm your selection
by pressing A.
Important: In easy mode only the following features
are available:
Speed, average speed, trip distance and trip timer.
In advanced mode all features are available and
settings for 2 bicycles can be stored.
C1 will now appear on the display. Set the
circumference of your tire in mm (see “Calculating
tire circumference”). Press B to set each digit and
press A to confirm each setting.
If you have selected advanced mode, you may now
enter the tire circumference for an additional bicycle.
- 8 -
Calculating tire circumference
Tire circumference can be easily calculated by
multiplying the tire diamtere with 3.1416.
The tire curcumference of some standard tire types
is listed in the following table.
Diameter Circumference
20" 1598
22" 1759
24" 1916
26" (650A) 2073
26,5" (Tubular) 2117
26,6" (700x25C) 2124
26,8" (700x28C) 2136
27" (700x32C) 2155
28" (700B) 2237
ATB 24"x1,75 1888
ATB 26x1,4 1995
ATB 26x1,5 2030
ATB 26x1,75 2045
ATB 26x2 (650B) 2099
27"x1 2138
27"x1 1/4 2155
The display now shows the unit of distance
SET KM / EINST KM / AJUSTE KM
SET KM / REG KM / AJUST KM
Select the unit miles (M) or Kilometers (KM) by
pressing B. Confirm your setting by pressing A.
- 9 -
The display now shows the age selection
SET AGE / ALTER / AGE
LEEFTIJD / ETA / EDAD
Set your age in years. Press B to set each digit and
pres A to confirm each setting.
The display now shows the unit of weight selection
SET KG / EINST KG / AJUSTE KG
SET KG / REG KG / AJUST KG
Select the unit Kilogram (KG) or Pounds (LB) by
pressing B. Confirm your selection by pressing A.
The display now shows the weight selection
SET WT / GEWICHT / POIDS
GEWICHT / PESO / PESO
Set your weight in the selected unit. Press B to set
each digit and pres A to confirm each setting.
The display will now show the 12 or 24 hour time
format selection
SET CLK / EINST U / REG MONT
UUR INST / IMP / AJUSTE H
Select your preferred format by pressing B. Confirm
your selection by pressing A.
Set the hours and minutes in the same way.
- 10 -
The display will now show the service interval
selection
SERVICE / SERVICE / SERVICE
SERVIZIO / SERVIZIO / SERVICIO
Set the interval by pressing B. Confirm your selection
by pressing A.
Possible settings are 200, 400, 600 or 800
Kilometers or Miles
If you selected advanced mode you may now select
the service interval for an additional bicycle.
The display will now show the temperature unit
selection. Select the temperature unit Celsius (°C) or
Fahrenheit (°F) by pressing B. Confirm your selection
by pressing A.
Using the bicycle computer
Press B to select a feature mode of the computer.
The lower row of the display will show the name of
the mode.
Press A to reach the subfeatures of each mode.
Press and hold A to reach the setting mode of a
feature or reset stored values.
- 11 -
Time
CLOCK / UHRZEIT / HEURE
TIJD / ORARIO / HORA
Press and hold A for 3 seconds to enter time setting
mode (see basic settings)
Total distance for bicycles 1 and 2
TOTODO / KM-RAD / KM-VELO
KMBIKE / KMBICI / KMBICI
Press and hold A for 3 seconds to enter setting mode
for tire diameter (see basic settings).
After tire diameter setting the stored values for the
odometer can be changed.
Total distance for both bicycles
TOTALODO / GESAMTKM / DIST-TOT
TOTAALKM / KM-TOTAL / KM-TOTAL
Press and hold A for 3 seconds to enter tire
circumference setting (see basic settings).
After tire diameter setting the stored values for the
odometer can be changed.
Press B to set the digits and confirm your settings by
pressing A.
- 12 -
Total time for bicycles 1 and 2
TOT-TM / TM-RAD / TMVELO
TMBIKE / TMBICI / TMBICI
Press and hold A for 3 seconds to change the stored
value.
Press B to adjust digits and press A to confirm each
digit.
Total time (both bicycles)
TOTAL-TM / GESAMTTM / TIME-TOT
TOTAALTM / TM-TOTAL / TM-TOTAL
Trip distance
TRIPDIST / TAGES-KM / DISJOUR
DAG-KM / KM-GIORN / KM-DIA
Press and hold A for 3 seconds to reset trip distance,
trip time and average speed.
Maximum speed
MAXSPEED / MAX-KMH / VIT-MAX
MAX-KM/H / V-MASSIM / V-MAXIM
Press and hold A for 3 seconds to reset the stored
maximum speed.
- 13 -
Average speed
AVGSPEED / DURCH-KM / VITMOYEN
GEM-KM/H / V-MEDIA / V-MEDIA
The average speed can be reset in the menu „trip
distance“.
Trip time
TRIPTIME / FAHRZEIT / TEMPPARC
RIT-TIJD / TEMP-GIR / TIEMP-TR
The trip time can be reset in the menu „trip distance“.
Thermometer
TEMP / GRAD / TEMP
TEMP / TEMP / TEMP
Press and hold A for 3 seconds to reach temperature
unit selection (°C or °F) (see basic settings)
Press A to show the maximum (HI) and minimum
(LO) values.
Press and and hold A while viewing (HI) or (LO) to
reset the selected value.
Stop watch
STPWATCH / STOPPUHR / CHRONO
STPWATCH / CRONOMET / CRONOMET
Press A to start or stop the stop watch. Press and
hold A to reset the stop watch.
- 14 -
Current calorie consumption
CAL RATE / KAL RATE / CONS CAL
CAL CONS / CAL CONS / CAL RATE
Calorie consumption at the current speed is
displayed.
Calorie counter
CALORIE / KALORIEN / CALORIE
CALORIE / CALORIA / CALORIA
Press and hold A for 3 seconds to reset the calorie
counter.
Fat burn in grams
FAT-BURN / FETT / GRAS
VET / GRASSO / GRASA
Press and hold A for 3 seconds to reset the fat burn
counter.
- 15 -
Distance counter (forward/reverse)
KM / KM / KM
KM / KM / KM
Press and hold A for 3 seconds to reach the setting
mode for the distance counter.
The symbol for the forward counter (+) or reverse
counter (-) will appear. Press B to select a counter
and confirm your setting by pressing A.
You can now set the desired distance. Press B to set
each digit and press A to confirm each setting.
After the set distance has been covered the display
will blink. Press A to stop the blinking.
Trip timer (forward/reverse)
TIME / TIMER / TIMER
TIMER / TIME / TIMER
Press and hold A for 3 seconds to reach the setting
mode for the trip timer.
The symbol for the forward counter (+) or reverse
counter (-) will appear. Press B to select a counter
and confirm your setting by pressing A.
You can now set the desired riding time. Press B to
set each digit and press A to confirm each setting.
After the set riding time has been completed the
display will blink. Press A to stop the blinking.
- 16 -
Scan mode SCAN
In scan mode SCAN will appear on the display.
The trip distance
TRIPDIST / TAGES-KM / DISJOUR
DAG-KM / KM-GIORN / KM-DIS
maximum speed
MAXSPEED / MAX-KMH / VITMAX
MAX-KM/H / V-MASSIM / V-MAXIM
average speed
AVGSPEED / DURCH-KM / VITMOYEN
GEM-KM/H / V-MEDIA / V-MEDIA
and trip timer
TRIPTIME / FAHRZEIT / TEMPPARC
RIT-TIJD / TEMP-GIR / TIEMP-TR
will alternate on the display.
Service reminder
When the set service interval is reached the service
reminder will blink on the display. Press A to reset
the service reminder.
- 17 -
Selection of bicycle 1 or bicycle 2
Press A and B together briefly to load the settings for
bicycle 1 or 2.
Please note: All stored values except total distance
will be reset.
Battery replacement (30-second
memory)
Before changing the battery, please press and hold A
and B together. {{-----}} will appear on the
display. If a new battery is inserted within 30
seconds, the stored values will remain intact. Press
and hold A.
Please dispose of your batteries properly in
containers especially set up at retailers. Batteries do
not belong in household waste.
- 18 -
Easy mode, advanced mode and
custom menus for easy mode
Press and hold C for 3 seconds.
The display will now show the mode for advanced
users
ADVANCE / FORTGES / AVANCE
ERVAREN / AVANZATO / FACIL
or for beginners
EASY / EINFACH / FACILE
BEGINNER / FACILE / AVANCADO
Select the desired mode by press B.
You can now confirm your selection by pressing A or
customize the easy mode. To customize easy mode
select the mode by pressing B, then press and hold
A.
Press B to activate (ON) or deacitvate (OFF) the
clock feature. Confirm your setting by pressing A.
The other features can be activated or deactivated in
the same way.
Energy saving mode
If the bicycle computer was not used for 5 minutes it
will automatically enter standby mode. Press any
button or start riding to reactivate the computer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Crivit 56074 User manual

Category
Watches
Type
User manual

Crivit 56074 features a large easy to read display with 5 function buttons to navigate its intuitive interface. This multipurpose bike computer can store data for up to two bicycles, allowing you to easily switch between bikes without losing track of important metrics. Monitor your speed, distance, time, and calories burned with precision, and stay informed about the ambient temperature with the integrated thermometer. Crivit 56074 is a versatile training companion, providing valuable insights into your performance and helping you achieve your fitness goals.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI