Brookstone 315225 User manual

Brand: Brookstone

Model: 315225

Type: User manual

This manual is also suitable for

315223

ELUMA CUBE

™

SPEAKER

WIRELESS • WEATHERPROOF • APP CONTROLLED

CAUTION

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER.

THERE ARE NO SERVICEABLE PARTS INSIDE.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The lightning flash with arrow-head symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the unit’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All of the safety and operating instructions should be read,

adhered to and followed before the unit is operated.

TABLE OF CONTENTS

Warnings and Cautions..................................1

FCC Information .......................................6

Location of Parts and Controls..........................8

Charging the Speaker.................................14

Remote Control Set Up ...............................14

Pairing Your Device ...................................15

Downloading Free App................................16

Syncing App and Speaker .............................17

Listening to Audio ....................................18

Using the Lights ......................................20

Selecting Light Colors.................................21

Selecting Light Modes ................................22

Using Aux In..........................................23

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

App Compatibility .....................................25

Speciﬁcations.........................................26

Troubleshooting.......................................27

Warranty .............................................28

SAFETY AND HANDLING INFORMATION

For maximum product life, do not drop, throw, or crush the

speaker. Do not expose it to operating temperatures outside

25°F to 120°F (-4°C to 49°C).

SAVE THESE INSTRUCTIONS

DANGER

To reduce the risk of electric shock, burns, fire or injury:

1. Do not use while bathing or in a shower.

2. Do not place or store unit where it can fall or be pulled

into a tub or sink.

3. Do not place in, drop or submerge in water or

other liquid.

4. Do not reach for a unit that has fallen into water.

Unplug it immediately.

5. Care should be taken so that objects do not fall and

liquids are not spilled onto the unit.

LITHIUM-ION BATTERY WARNINGS

This device contains a non-removable Lithium-Ion battery. The

battery must be recycled or disposed of properly. Contact your

local waste management office for information on battery

recycling or disposal.

WARNING

1. Close supervision is necessary when this appliance/

product is used by or near children or mentally

disabled individuals.

2. Use this unit only for its intended use as described in

this manual.

3. Unplug this unit during lightning storms or when unused

for long periods of time.

4. Never drop or insert an object into any opening.

5. Protect the power cord from being walked on or pinched,

particularly at plug outlets, convenience receptacles and

the point where it exits the unit.

6. Do not allow cord to touch hot surfaces. Wrap cord loosely

2 3

4 5

around the unit when storing.

7. The unit should be situated away from direct sunlight

or heat sources such as radiators, electric heaters, heat

registers, stoves, or other units (including amplifiers) that

produce heat. Avoid placing on top of stereo equipment

that radiates heat.

8. Never block the air openings of the unit with materials such

as clothing, plastic bags or papers, or place it on a soft

surface such as a bed or couch, where the air openings

may be blocked.

9. Do not overload the electrical outlet. Use only the power

source as indicated.

10. Do not carry this unit by its cord or use the cord

as a handle.

11. Never operate this unit if it has a damaged cord or plug,

if it is not working properly, or if it has been dropped or

damaged, or dropped into water. If the unit’s power supply

cord or plug is damaged, do not attempt to fix it yourself.

12. To avoid the risk of electric shock, do not disassemble or

attempt to repair the unit. Incorrect repair can cause risk of

electric shock or injury to persons when the unit is used.

13. Do not operate in the presence of explosive and/or

flammable fumes.

14. Never remove the plug from the outlet by pulling the

power cord.

FCC INFORMATION

This equipment has been tested and found to comply with

the limits for a Class B Digital Device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

6 7

for help.

This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference received,

including interference that may cause undesired operation.

Modifications not authorized by the manufacturer may void the

user’s authority to operate this device.

FCC ID: 2AGOQ-Y641

Apple, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in

the U.S. and other countries.

App Store is a service mark of Apple Inc.

Android is a trademark of Google, Inc.

Google Play is a trademark of Google, Inc.

The Bluetooth

word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

LOCATION OF PARTS AND CONTROLS (SPEAKER)

1. Remote IR Sensor

2. Bluetooth/Charging LED Indicator

3. Micro USB In Port (under port cover)

4. Aux In Port (under port cover)

5. Power/Light Button

6. Micro USB Charging Cable

7. USB Adapter

LOCATION OF PARTS AND CONTROLS (SPEAKER)

1110

LOCATION OF PARTS AND CONTROLS

(REMOTE CONTROL)

1. Red Button

2. Green Button

3. Purple Button

4. Yellow Button

5. Candle Button

6. White Button

7. Track Back Button

8. Track Forward Button

9. Volume - Button

10. Volume + Button

11. Battery Compartment

12. Power Button

13. Pairing Button

14. Play/Pause Button

15. Beat Mode Button

16. Mode Button

17. Smooth Mode Button

18. Cyan Button

19. Fade Mode Button

20. Blue Button

21. Strobe Mode Button

22. Flash Mode Button

23. Light Button

24. Brightness - Button

25. Brightness + Button

LOCATION OF PARTS AND CONTROLS

(REMOTE CONTROL)

12 13

LOCATION OF PARTS AND CONTROLS (APP) LOCATION OF PARTS AND CONTROLS (APP)

1. Light Spectrum Selector

2. Brightness - Button

3. Brightness + Button

4. Light Button

5. Flash Mode Button

6. Strobe Mode Button

7. Volume - Button

8. Songs Button

9. Artists Button

10. Mute Button

11. Track Back Button

12. Track Forward Button

13. Play/Pause Button

14. FAV Button

15. Albums Button

16. Volume + Button

17. Beat Mode Button

18. Fade Mode Button

19. Smooth Mode Button

20. Power Off Button

21. Mode Button

14 15

PAIRING YOUR DEVICE

1. Prepare your device to pair using Bluetooth

technology,

making sure the device is within 33 feet of the speaker.

Refer to your device’s owners manual for details if

necessary.

2. Press and hold the POWER/LIGHT BUTTON on the

speaker for 3 seconds or press the POWER BUTTON

on the remote until the BLUETOOTH LED turns on and

starts flashing. The speaker will announce “Bluetooth”

then “Waiting for Connection.”

3. Select “Eluma Cube Speaker” on your device. If

prompted, use 0000 as a PIN for the pairing code.

4. When “Eluma Cube Speaker” is selected, the

BLUETOOTH LED will be solid blue and the speaker will

announce “Bluetooth Connected”.

5. To pair a different device, press the PAIRING BUTTON

on the remote. The BLUETOOTH LED will flash and the

speaker will announce “Bluetooth Disconnected” then

“Waiting for Connection”. Follow steps 3 and 4 to pair the

device.

CHARGING THE SPEAKER

1. Lift the port cover and insert the MICRO USB CHARGING

CABLE into the MICRO USB IN PORT on the speaker.

Plug the MICRO USB CHARGING CABLE'S USB

connection into the included USB ADAPTER or into the

USB port on your computer. The speaker will be fully

charged in approximately 8 hours.

2. The CHARGING LED INDICATOR is RED while the

speaker is charging. When the speaker is fully charged,

the CHARGING LED INDICATOR turns off. For first

time use, fully charge the speaker.

3. When the battery is low, the speaker will announce “Low

Battery.”

REMOTE CONTROL SET UP

Remove the insulator tab under the REMOTE CONTROL

BATTERY COMPARTMENT.

Note: To cancel the pairing mode, either press the POWER/

LIGHT BUTTON on the speaker for 3 seconds or press the

POWER BUTTON on the remote. The speaker will

announce “Power Off” and turn off.

DOWNLOADING FREE APP

Go to the iTunes

App Store

(for Apple devices) or Google

Play

(for Android devices) to download the Eluma Cube

Speaker App, “Eluma Cube.”

SYNCING APP AND SPEAKER

1. Once a Bluetooth

connection has been made between

your device and the Eluma Cube Speaker (please refer

to page 15 for pairing instructions), open the Eluma

Cube app on your device.

2. On the Devices screen, activate the Eluma Cube

Speaker by sliding the selector button located next to

the name of the speaker to the right, then tap on “Eluma

Cube Speaker” to open the main app screen.

16 17

Eluma Cube

Selector Button (activated)

Speaker Name

1918

7. Press the TRACK FORWARD BUTTON on the remote or

in the Eluma Cube app to go to the next track.

8. Press the TRACK BACK BUTTON on the remote or

in the Eluma Cube app to go to the previous

track.

9. To access music from your devices music library, press

the ARTISTS, SONGS or ALBUMS BUTTONS in the

Eluma Cube app.

10. To save a song as a favorite, press the heart on the song

screen in the Eluma Cube app.

11. To access favorites, press the FAV BUTTON in the Eluma

Cube app.

12. To turn the speaker off, press and hold the POWER

LIGHT BUTTON on the speaker for 3 seconds, press the

POWER BUTTON on the remote or press the POWER

OFF BUTTON in the Eluma Cube app.

Note: The speaker will auto shut off if there is no Bluetooth

audio streaming for 20 minutes.

LISTENING TO AUDIO

1. Press and hold the POWER/LIGHT BUTTON on the

speaker for 3 seconds or press the POWER BUTTON

on the remote until the BLUETOOTH LED turns on and

starts flashing. The speaker will announce “Bluetooth”

then “Waiting for Connection.”

2. The speaker will automatically remember the last paired

device. Depending on your device, “Eluma Speaker” may

need to be selected in your device’s menu. When the last

paired device is found, the speaker will announce

“Bluetooth Connected.”

3. Press the VOLUME + BUTTON on the remote or in the

Eluma Cube app to increase audio volume.

4. Press the VOLUME - BUTTON on the remote or in the

Eluma Cube app to decrease audio volume.

5. Press the MUTE BUTTON in the Eluma Cube app to

mute audio.

6. Press the PLAY/PAUSE BUTTON on the remote or in

the Eluma Cube app to pause audio. Press the PLAY/

PAUSE BUTTON on the remote or in the Eluma Cube

app to play audio.

2120

SELECTING LIGHT COLORS

1. Press the RED BUTTON on the remote to activate the

red light.

2. Press the GREEN BUTTON on the remote to activate

the green light.

3. Press the BLUE BUTTON on the remote to activate

the blue light.

4. Press the PURPLE BUTTON on the remote to activate

the purple light.

5. Press the YELLOW BUTTON on the remote to activate

the yellow light.

6. Press the CYAN BUTTON on the remote to activate

the cyan light.

7. Press the CANDLE BUTTON on the remote to activate

candlelight.

8. Press the WHITE BUTTON on the remote to activate

the white light.

9. Select a custom color using the LIGHT SPECTRUM

SELECTOR in the Eluma Cube app.

USING THE LIGHTS

1. Press the POWER/LIGHT BUTTON on the speaker or

the LIGHT BUTTON on the remote to turn the lights on

to Beat mode.

2. When the color selected is solid, press the

BRIGHTNESS + BUTTON on the remote or in the

Eluma Cube app to increase the light brightness.

3. When the color selected is solid, press the

BRIGHTNESS - BUTTON on the remote or in the Eluma

Cube app to decrease the light brightness.

4. Press the POWER/LIGHT BUTTON on the speaker or

the LIGHT BUTTON on the remote to turn the lights off.

2322

USING AUX IN

1. Plug one end of a 3.5mm-to-3.5mm cable (not

included) into your audio device, just like you would a pair

of headphones.

2. Lift the port cover and plug the other end of the cable

into the speaker’s AUX IN port.

3. Press the MODE BUTTON on the remote or in the

Eluma Cube app to switch to Aux In mode. The speaker

will announce “Line In.”

4. Use your audio device to control music playback.

5. Use your audio device, the remote control or the

Eluma Cube app to control volume.

6. Press the MODE BUTTON on the remote or in the

Eluma Cube app to switch to Bluetooth mode. The

speaker will announce “Bluetooth.”

SELECTING LIGHT MODES

1. Press the FLASH BUTTON on the remote or in the

Eluma Cube app to activate the Flash mode, a fast

transition of Red, Green, Blue, Purple, Yellow, Cyan,

Orange and White lights.

2. Press the STROBE BUTTON on the remote or in the

Eluma Cube app to activate the Strobe mode, a fast flash

of the last color selected.

3. Press the FADE BUTTON on the remote or in the

Eluma Cube app to activate the Fade mode, a slow

fading in and out of the Red, Green and Blue lights.

4. Press the SMOOTH BUTTON on the remote or in the

Eluma Cube app to activate the SMOOTH mode, a slow

transition of Pink, Purple, Blue, Cyan, Green, Yellow and

Orange lights.

5. Press the BEAT BUTTON on the remote or in the

Eluma Cube app to activate the BEAT mode, rapid color

changing of light colors to the beat of the music.

Note: If there is no beat detected (volume is too low or audio

does not have enough bass), Beat mode defaults to Smooth mode.

2524

iPhone SE

iPhone 6s Plus

iPhone 6s

iPhone 6 Plus

iPhone 6

iPhone 5s

iPhone 5c

iPhone 5

iPod touch

5th generation

iPod touch

6th generation

iPad Pro (12.9 inch)

iPad Pro (9.7 inch)

iPad Air 2

iPad Air

iPad mini 4

iPad mini 3

iPad mini 2

iPad mini

iPad

(4th generation)

APP COMPATIBILITY

Apple

iOS: 7.0 and later

Android 4.3 and later, CPU: 800MHz, RAM: 512M

App is only compatible with select Bluetooth

4.0 and

Bluetooth

Smart Ready devices.

CARE AND MAINTENANCE

The Eluma Cube Speaker is water resistent. Do not submerge

in water.

To clean, wipe the speaker with a soft, dry cloth.

REPLACING THE REMOTE CONTROL BATTERY

1. Remove the REMOTE CONTROL BATTERY

COMPARTMENT.

2. Place a new CR2025 button cell battery into the battery

compartment according to the polarity indicator.

3. Replace the REMOTE CONTROL BATTERY

COMPARTMENT.

Power the speaker off and then

back on.

Adjust your device’s equalizer.

Check the speaker or your device’s

volume level.

2726

ISSUE SOLUTION

Bluetooth

disconnection.

Ensure your device is within 33 feet of

the speaker and reconnect your device

to "Eluma Cube Speaker."

TROUBLESHOOTING

Audio is not clear.

Speaker does not

play audio.

Make sure the speaker is charged.

Power the speaker off and then

back on.

“Eluma Cube Speaker”

is not listed on “Device”

screen in Eluma Cube

app.

Ensure your device is within 33 feet of

the speaker and reconnect your device

to “Eluma Cube Speaker.”

Apple ® App is only compatible with

select Bluetooth

4.0 and Bluetooth

Smart Ready devices.

SPECIFICATIONS

Power Supply (input) ............. AC 100V~240V, 50/60 Hz

Power Supply (output) ............................ DC 5V, 1A

Power Output ...........................................5W

Range ........................... Class 2, up to 33 ft (10 m)

Speaker .................................... 4.2", 4Ohm (1)

Frequency Response ........................ 120Hz~20KHz

Compatibility...................... Bluetooth

4.0/Bluetooth

Smart Ready

Li-ion Rechargeable Battery................. 3.7V, 4400 mAh

Battery Life................................ Approx. 12 hours

Charging Time............................... Approx. 8 hours

Weight ....................................... Approx. 3.3lbs

Dimensions.................... 7.87"(w) x 8.26"(d) x 8.36"(h)

28 29

ONE (1) YEAR LIMITED WARRANTY

Big Blue Audio

LLC warrants this product against defects in materials and/

or workmanship under normal use for a period of ONE (1) YEAR from the

date of purchase by the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty Period, at its option,

Big Blue Audio will either 1) repair the defect at no charge, using new

or refurbished replacement parts, or 2) replace the product with a new

product that is at least functionally equivalent to the original product, or

3) provide a store credit in the amount of the purchase price of the original product.

A replacement product or part, including a user-installable part installed in

accordance with instructions provided by Big Blue Audio, assumes the remaining

warranty of the original product. When a product or part is exchanged, any

replacement item becomes your property and the replaced item becomes Big Blue

Audio’s property. When a store credit is given, the original product must be returned

to Big Blue Audio and becomes Big Blue Audio’s property.

Obtaining Service: To obtain warranty service, call Big Blue Audio Limited Warranty

Service at 866-577-8955. Please be prepared to describe the product that needs

service and the nature of the problem. A purchase receipt is required. All repairs and

replacements must be authorized in advance. Service options, parts availability and

response times will vary. You are responsible for delivery and the cost of delivery

of the product or any parts to the authorized service center for replacement, per

our instructions.

Limits and Exclusions: Coverage under this Limited Warranty is limited to the

United States of America, including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only

to products manufactured for Big Blue Audio that can be identified by the “Big Blue

Audio” trademark, trade name, or logo affixed to them or their packaging. The Limited

Warranty does not apply to any non-Big Blue Audio products. Manufacturers or

suppliers other than Big Blue Audio may provide their own warranties to the purchaser,

but Big Blue Audio, in so far as permitted by law, provides these products “as is.”

This warranty does not apply to: a) damage caused by failure to follow instructions

relating to product’s use or the installation of components; b) damage caused

by accident, abuse, misuse, fire, floods, earthquake or other external causes; c)

damage caused by service performed by anyone who is not a representative of

Big Blue Audio; d) accessories used in conjunction with a covered product; e) a

product or part that has been modified to alter functionality or capability; f) items

intended to be periodically replaced by the purchaser during the normal life of the

product including, without limitation, batteries or light bulbs; g) any product sold “as

is” including, without limitation, floor demonstration models and refurbished items;

or h) a product that is used commercially or for a commercial purpose.

BIG BLUE AUDIO SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS

PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, BIG BLUE AUDIO

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES,

INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST

HIDDEN OR LATENT DEFECTS. IF BIG BLUE AUDIO CANNOT LAWFULLY

DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN

DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of incidental or consequential

damages or how long an implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you specific legal rights and

you may also have other rights, which vary from state to state.

315223 315225

Find thousands more

great ideas online

Merrimack, New Hampshire, USA 03054 • 800-846-3000 • Brookstone.com

Brookstone 315225 User manual

Brand: Brookstone

Model: 315225

Type: User manual

This manual is also suitable for

315223

Download PDF

report

Brookstone 315225 User manual

This manual is also suitable for

Brookstone 315225 User manual

Related papers

Other documents