Palm Neomar WAP Browser Install Manual

Brand: Palm

Model: Neomar WAP Browser

Type: Install Manual

browser installation guide

browser installation guidebrowser installation guide

browser installation guide

Page 1 of 1

Neomar™ WAP Browser for Palm™ handheld: Installation

Guide

Thank you for using the Neomar™ WAP Browser for Palm™ handheld devices. This

document provides step-by-step instructions for installing, removing, and updating

the browser. Please read the User Guide for instructions on using the browser.

Hardware & Software Requirements

• Palm OS® 3.1, 3.3, or 3.5 handheld with approximately 300K free memory

for applications

• Cradle or HotSync® Cable

• Palm™ Desktop software with Install Tool

• Launcher application (WAPLauncher.prc)

• Browser application (WAPBrowser.prc)

Installing the Browser

The browser application files can be downloaded from the WAP folder in the Mobile

Internet Kit CD. The folder contains the two applications that you must install in order

for the browser to work.

• WAPLauncher.prc

• WAPBrowser.prc

1. Launch the Palm Desktop application on your computer.

2. Click the "Install" button to open the Install Tool dialog. In the User drop-down list,

select the name that corresponds to your Palm handheld profile.

browser installation guide

browser installation guidebrowser installation guide

browser installation guide

Page 2 of 2

3. For each application WAPBrowser.prc and WAPLauncher.prc:

a) Click the "Add" button to open the Open dialog.

b) Browse to find the application.

c) Highlight the application name.

d) Click "Open" to return to the Install Tool dialog.

When you have added both applications, click "Done", then "OK."

NOTE You must install both the launcher and browser applications on your

handheld. The launcher is necessary to launch the browser application with

the correct settings.

4. Make sure that your Palm handheld is connected to your computer via the cradle

or HotSync® cable. Perform a local HotSync operation to install the applications. For

information on how to perform a local HotSync Operation, please read your Palm

documentation.

The browser is now installed on your Palm handheld. Please see the User’s

Guide for instructions on using the browser.

NOTE To use the browser, your Palm handheld must be connected to the

wireless Internet. For information on how to get your Palm Handheld

connected, please read Palm Getting Started guide for the Mobile Internet Kit.

Removing the Browser

1. Tap the Palm Applications icon to open the Applications screen.

2. Tap the Palm Menu icon to open the Applications menus.

3. Tap "Delete" from the App menu to open the Delete dialog.

browser installation guide

browser installation guidebrowser installation guide

browser installation guide

Page 3 of 3

4. Select “WAP”, then tap the “Delete…” button, and then answer “Yes” to the

dialogue box. Repeat this process to delete the “Neomar” application as well.

5. Tap "Done" to close the Delete dialog and return to the Applications screen.

Updating the Browser

To update to a new browser version, you must remove the old launcher and browser

applications (see Removing the Browser) before installing the new files (see

Installing the Browser).

Neomar is a trademark of Neomar, Inc. Palm OS and HotSync are registered trademarks, and Palm

is a trademark of Palm, Inc. or its subsidiaries. All other company and product names may be

trademarks of the respective companies with which they are associated.

Palm Neomar WAP Browser Install Manual

Palm Neomar WAP Browser Install Manual

Palm Neomar WAP Browser Install Manual

Related papers

Other documents