Yale Yale 1105 Installation guide

Brand: Yale

Model: Yale 1105

Type: Installation guide

This manual is also suitable for

1105

Assa Abloy Yale 1105 is a versatile door closer suitable for both residential and commercial applications. It offers various installation options, allowing for mounting on either the push or pull side of the door, as well as on the top jamb.

With adjustable closing and latching speeds, you can customize the door's operation to your specific needs. The parallel arm installation allows for a 140° opening, while the regular arm installation provides a full 180° opening.

The closer's force can also be adjusted to accommodate different door weights and sizes.

PARALLEL ARM Installation

Closer Mounted On Push Side Of Door

Parallel arm installation to 140° opening.

5-5/8

(143)

1-7/8

(48)

15/16

(24)

Parallel Bracket

Arm Screw and

Lockwasher

1/2

(13)

7/8

(22)

3 holes for 3/16 (4.8) wood

or M5xP0.8 machine screws

Hinge Edge of Door

3/4

(19)

(76)

4-1/8

(105)

9-1/16

(230)

Speed Regulating Screws

Away From Hinge Edge of Door

4 Holes for Ø7/32 (5.6) Wood Screws

or M5xP0.8 Machine Screws

SPEED- Door closing and latching speeds are controlled by

"1", "2" speed regulating screw separately.

A: Clockwise turns slow the speed. B: Counterclockwise turns

increase the speed.

Closing Speed

Regulating Screw

Latching Speed

Regulating Screw

Fast

Slow

Speed

Latch

LEFT HAND DOOR SHOWN.

Same dimensions apply for Right Hand

door measured from hinge edge.

Do not scale drawing.

All dimensions given in inches (mm).

ADJUSTMENT INSTRUCTIONS

1. Use dimensions shown in above template to mark (4) four holes

on door for closer and (3) three holes on frame for parallel

bracket.

2. Drill pilot holes in door and frame for Ø7/32" (5.6) wood screws

or M5xP0.8 machine screws.

3. Mount closer on door with SPEED REGULATING SCREW

AWAY FROM HINGE EDGE.

4. Attach parallel bracket to door stop as illustrated.

5. Using a wrench on the square shaft on bottom of closer, rotate

shaft approximately 45° toward hinge edge of door. Hold and

place main arm on shaft on top of closer and proper index mark

as illustrated.

FOR LEFT HAND DOOR NO. 3 (ILLUSTRATION "A").

FOR RIGHT HAND DOOR NO. 2 (ILLUSTRATION "B").

6. Mount arm shoe and parallel bracket with M5x6mm screws.

7. Adjust length of forearm to connect main arm (The main arm will

be slightly away from door.) and assemble at elbow then tighten

locknut.

PARALLEL ARM INSTALLATION INSTRUCTIONS

Forearm

Locknut

Main Arm

Index Mark

Left hand door, use index mark 3

ILLUSTRATION "A"

Forearm

Locknut

Main Arm

Index Mark

Right hand door, use index mark 2

ILLUSTRATION "B"

POSITION OF ARMS AND INDEX SETTINGS

1105 Door Closers

Installation Instructions

An ASSA ABLOY Group brand

9610 INS-J574 4/10R

TOP JAMB Installation Closer Mounted Top Jamb On Push Side of Door

Top jamb installation to 180° Opening. 1-3/4" (44.5) Maximum Reveal.

Shaft

Speed Regulating Screws

Toward Hinge Edge of Door

1-3/4

(45)

1-1/2

(38)

2 Holes for Ø3/16 (4.8)

Wood Screws or

M5xP0.8 Machine Screws

4 Holes for Ø7/32 (5.6)

All Purpose or

M5*P0.8 Machine Screws:

4 for Closer

1/2

(13)

3/4

(19)

Hinge Edge of Door

LEFT HAND DOOR ILLUSTRATED. Same dimensions

apply for Right Hand Door measured from hinge edge.

Arm Shoe

Arm Screw and

Lockwasher

Pinion Cap

Reveal

POSITION OF ARMS

AND INDEX SETTINGS

Index

Mark

Right hand door. Use index mark 4.

Main

Arm

Locknut

Forearm

Elbow

90°

Index

Mark

Left hand door. Use index mark 1.

Main

Arm

Locknut

Forearm

Elbow

90°

REGULAR ARM (Standard Installation) Closer Mounted On Pull Side of Door

Regular arm installation to 180° Opening.

Arm Shoe

Arm Screw and

Lockwasher

Pinion Cap

Shaft

Speed Regulating Screws

Toward Hinge Edge of Door

1-3/4

(45)

3/4

(19)

2 Holes for Ø3/16 (4.8)

Wood Screws or

M5xP0.8 Machine Screws

4 Holes for Ø7/32 (5.6)

Wood Screws or

M5*P0.8 Machine Screws:

4 for Closer

1-1/8

(28.5)

3/4

(19)

Hinge Edge of Door

RIGHT HAND DOOR ILLUSTRATED. Same dimensions

apply for Left Hand Door measured from hinge edge.

9-1/16

(230)

2-5/8

(67)

8-1/4

(210)

Hinge Centerline

Stronger

Closer Force

Weaker Closer Force

Closing force can be changed

by rotating link arm left or

right.

The shorter distance from link

arm to hinge centerline will

make closing force stronger.

POSITION OF ARMS

AND INDEX SETTINGS

Index

Mark

Right hand door. Use index mark 4.

Main

Arm

Locknut

Forearm

Elbow

90°

Index

Mark

Left hand door. Use index mark 1.

Main

Arm

Locknut

Forearm

Elbow

90°

9-1/16

(230)

2-5/8

(67)

8-1/4

(210)

An ASSA ABLOY Group brand

9610 INS-J574 4/10R

100 Yale Avenue, Lenoir City, TN 37771 • Product Support Tel 800.438.1951 • Fax 800.338.0965 • www.yalelocks.com

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective

owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.

Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.