Panasonic TY-42TM6P Operating instructions

TY-42TM6P
Panasonic
Brand
Panasonic
Model
TY-42TM6P
Category
Coffee making accessories
Type
Operating instructions

This manual is also suitable for

Panasonic TY-42TM6P is a PC input terminal board that allows you to connect your computer to your PDP unit and use it as a display. It supports DDC1/2B and various input signals, including component (color difference) video signals. Additionally, the board comes with a terminal function label, replacement instructions, a slot cover, and screws for easy installation.

Panasonic TY-42TM6P is a PC input terminal board that allows you to connect your computer to your PDP unit and use it as a display. It supports DDC1/2B and various input signals, including component (color difference) video signals. Additionally, the board comes with a terminal function label, replacement instructions, a slot cover, and screws for easy installation.

1
TQZH468
Model No. TY-42TM6P
ItalianoFrançaisEspañolSvenskaDansk
EnglishDeutsch
Nederlands
PC Input Terminal Board
Operating Instructions
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
PC-Eingang-Terminal-Board
Bedienungsanleitung
Vor dem Anschluß, Betrieb oder der Einstellung dieses Gerätes lesen Sie bitte diese
Bedienungsanleitung vollständig durch.
Bitte heben Sie diese Bedienungsanleitung als zukünftige Referenz sorgfältig auf.
PC-ingang aansluitingenkaart
Gebruiksaanwijzing
Lees de gebruiksaanwijzing aandachtig door voordat u het apparaat aansluit,
bedient of afstelt.
Bewaar de gebruiksaanwijzing voor eventuele latere naslag.
Dispositivo terminale per ingresso da PC
Istruzioni per l’uso
Prima di collegare, utilizzare o regolare questo apparecchio, leggere attentamente le
presenti istruzioni.
Conservare poi il manuale per ogni eventuale futura consultazione.
Carte de connexion d'entrée PC
Mode d'emploi
Avant d'effectuer quelque raccordement que ce soit ou de régler l'appareil, veuillez
lire attentivement ce mode d'emploi.
Conservez ce mode d'emploi pour référence.
Tarjeta de terminales de entrada PC
Manual de instrucciones
Antes de conectar, utilizar o ajustar este producto, lea completamente este manual
de instrucciones.
Guarde este manual para consultarlo en el futuro en caso de ser necesario.
PC input-terminalkor
Betjeningsvejledning
Læs hele denne betjeningsvejledning, før der foretages tilslutninger, betjeninger eller
justeringer af dette produkt.
Gem betjeningsvejledningen til fremtidig brug.
Uttagsplatta för datoringång
Bruksanvisning
Läs noga denna bruksanvisning före anslutning, användning eller
justering av denna produkt.
Bevara bruksanvisningen för framtida referens.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
6
Safety Precautions (be sure to observe)
Handling Cautions
• Do not touch the connector contacts.
To avoid electrostatic damage to internal parts, touch a large metallic object such as a steel cabinet to
discharge yourself before handling this product.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.
Terminal function label (1 sheet)
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal board replacement
Instructions
(Affix this label to the rear panel of the display.)
WARNING
•
Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
• If you sense smoke, an odd odor, or unusual noises while in operation, immediately turn the display off.
Switch off the plasma display and unplug it from the supply outlet.
To avoid fire or shock, do not leave the display turned on.
• To avoid shock or other problems, do not leave the display plugged into the supply outlet.
• Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the display off and unplug it
from the supply outlet.
Slot cover
AUDIO
COMPONENT/RGB IN
SLOT
3
1
2
[ To install this Terminal Board, remove an existing dual size
Terminal Board and fit it into the now blank slot. ]
English
Screw × 4
7
Slot Nos. of the PDP unit that are compatible with terminal board attachments.
Connection
37inche Slot1 ,Slot2
42inche 50inche Slot1 ,Slot2 ,Slot3
English
SLOT
3
1
2
AUDIO
PC IN
SLOT1
SLOT2
SLOT3
SLOT3
COMPONENT/RGB IN
Conversion adapter
(if necessary)
PC cable
RGB
Audio
Stereo plug
Connect a cable which matches
the audio output terminal on the
computer.
D-sub 15p
computer
Notes:
(1) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible,
you will need to make setting changes to the computer at the time of connection.
(2) Some PC models cannot be connected to the set.
*There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(3) The computer shown in the illustration is for example purposes only.
(4) Additional equipment and cables shown are not supplied with this set.
(5) Component Input is possible with the pin 1, 2, 3 of the D-sub 15P Connector.
(6) For details of compatibility with input signals, please refer to Plasma Display operating instructions.
(7) D-sub 15P connector does not support the DPMS function.
Signal Names for D-sub 15P Connector
Pin Layout for PC Input
Terminal
1
678
3
9
45
10
1514131211
2
Pin No.
1
2
3
4
5
Pin No.
6
7
8
9
10
Pin No.
11
12
13
14
15
Signal Name
R (PR/CR)
G (Y)
B (PB/CB)
GND (Ground)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
SDA
HD/SYNC
VD
SCL
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
22
•
•
•
•
•
•
A
U
DI
O
CO
MP
O
NENT
/
R
G
B I
N
S
L
O
T
3
1
2
× 4
23
SLOT
3
12
AUDIO
PC IN
SLOT1
SLOT2
SLOT3
SLOT3
COMPONENT/RGB IN
24
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
MBS0503S0
Applicable input signals
1 525 (480) / 60i 15.73 59.94
∗∗
2 525 (480) / 60p 31.47 59.94
∗∗
3 625 (575) / 50i 15.63 50.00
∗∗
4 625 (575) / 50p 31.25 50.00
∗∗
5 750 (720) / 60p 45.00 60.00
∗∗
6 750 (720) / 50p 37.50 50.00
∗∗
7 1,125 (1,080) / 60i 33.75 59.94
∗∗
8 1,125 (1,080) / 50i 28.13 50.00
∗∗
9 1,125 (1,080) / 24p 27.00 24.00
∗∗
10 1,125 (1,080) / 24sF 27.00 48.00
∗∗
11 1,250 (1,080) / 50i 31.25 50.00
∗∗
12 640 × 400 @70Hz 31.47 70.00
∗
13 640 × 480 @60Hz 31.47 59.94
∗
14 Macintosh13” (640 × 480) 35.00 67.67
∗
15 640 × 480 @75Hz 37.50 75.00
∗
16 852 × 480 @60Hz 31.50 60.00
∗
17 800 × 600 @60Hz 37.88 60.32
∗
18 800 × 600 @75Hz 46.88 75.00
∗
19 800 × 600 @85Hz 53.67 85.06
∗
20 Macintosh16” (832 × 624) 49.73 74.55
∗
21 1,024 × 768 @60Hz 48.36 60.00
∗
22 1,024 × 768 @70Hz 56.48 70.07
∗
23 1,024 × 768 @75Hz 60.02 75.03
∗
24 1,024 × 768 @85Hz 68.68 85.00
∗
25 Macintosh21” (1,152 × 870) 68.68 75.06
∗
26 1,280 × 1,024 @60Hz 63.98 60.02
∗
27 1,280 × 1,024 @75Hz 79.98 75.03
∗
28 1,280 × 1,024 @85Hz 91.15 85.02
∗
29 1,600 × 1,200 @60Hz 75.00 60.00
∗
30 1,066 × 600 @60Hz 37.88 60.32
∗
31 1,366 × 768 @60Hz 48.36 60.00
∗
horizontal
frequency(kHz)
vertical
frequency(Hz)
signal name COMPONENT RGB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Panasonic TY-42TM6P Operating instructions

TY-42TM6P
Panasonic
Brand
Panasonic
Model
TY-42TM6P
Category
Coffee making accessories
Type
Operating instructions
This manual is also suitable for

Panasonic TY-42TM6P is a PC input terminal board that allows you to connect your computer to your PDP unit and use it as a display. It supports DDC1/2B and various input signals, including component (color difference) video signals. Additionally, the board comes with a terminal function label, replacement instructions, a slot cover, and screws for easy installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents