1
RGB active-through Terminal Board
Operating Instructions
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
Aktives RGB-Terminal-Board
Bedienungsanleitung
Vor dem Anschluß, Betrieb oder der Einstellung dieses Gerätes lesen Sie bitte diese
Bedienungsanleitung vollständig durch.
Bitte heben Sie diese Bedienungsanleitung als zukünftige Referenz sorgfältig auf.
RGB-actief via de aansluitingenkaart
Gebruiksaanwijzing
Lees de gebruiksaanwijzing aandachtig door voordat u het apparaat aansluit,
bedient of afstelt.
Bewaar de gebruiksaanwijzing voor eventuele latere naslag.
Scheda per i terminali RGB ad attivazione passante
Istruzioni per l’uso
Prima di collegare, utilizzare o regolare questo apparecchio, leggere attentamente le
presenti istruzioni.
Conservare poi il manuale per ogni eventuale futura consultazione.
Carte de connexion active RVB
Mode d'emploi
Avant d'effectuer quelque raccordement que ce soit ou de régler l'appareil, veuillez
lire attentivement ce mode d'emploi.
Conservez ce mode d'emploi pour référence.
Tarjeta de terminales pasante y activa RGB
Manual de instrucciones
Antes de conectar, utilizar o ajustar este producto, lea completamente este manual
de instrucciones.
Guarde este manual para consultarlo en el futuro en caso de ser necesario.
RGB aktiv-gennemgang terminalkort
Betjeningsvejledning
Læs hele denne betjeningsvejledning, før der foretages tilslutninger, betjeninger eller
justeringer af dette produkt.
Gem betjeningsvejledningen til fremtidig brug.
RGB direktaktiv uttagsplatta
Bruksanvisning
Läs noga denna bruksanvisning före anslutning, användning eller
justering av denna produkt.
Bevara bruksanvisningen för framtida referens.
Italiano
Français
EspañolSvenska
Dansk
English
Deutsch
Nederlands
TQBC0498
Model No. TY-37TM5G
TY-42TM5G
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
6
SERIAL OUTPC1
INOUT
Safety Precautions (be sure to observe)
Handling Cautions
• Do not touch the connector contacts.
To avoid electrostatic damage to internal parts, touch a large metallic object such as a steel cabinet to
discharge yourself before handling this product.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.
Terminal function label (1 sheet)
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal board replacement
Instructions
(Affix this label to the rear panel of the display.)
WARNING
•
Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
• If you sense smoke, an odd odor, or unusual noises while in operation, immediately turn the display off.
Switch off the plasma display and unplug it from the supply outlet.
To avoid fire or shock, do not leave the display turned on.
• To avoid shock or other problems, do not leave the display plugged into the supply outlet.
• Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the display off and unplug it
from the supply outlet.
English
7
This Manual describes handling methods when installing this product into plasma displays made by our company,
and use with multiple screens.
The form of the terminal board will differ depending on the size of the display.
Connections
AUDIO
SERIAL
PC INSERIAL OUTPC1
INOUT
AUDIO
SERIAL
PC INSERIAL OUTPC1
INOUT
Computer
PC cable
D-sub 15p
RS-232C straight cable
D-sub 9p
To other Plasma display
PC1 IN terminal SERIAL terminal
Conversion adapter
(if necessary)
Notes:
• To enable use with multiple screens, multi-screen setting must be performed for each plasma display.
• Read the Operating Instructions supplied with the Plasma display for the details.
Connect 4 or 9 plasma displays in sequence, as shown in the diagram below.
Example showing connection of four units
RS-232C straight cable
PC cable
Signal Names for D-sub 15p Connector
Pin Layout for PC1 Terminal
Pin No.
1
2
3
4
5
Pin No.
6
7
8
9
10
Pin No.
11
12
13
14
15
Signal Name
R
G
B
GND (Ground)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
SDA
HD/SYNC
VD
SCL
1
678
3
9
45
10
1514131211
2
Pin layout for SERIAL OUT Terminal
1
2
3
4
5
6
7
8
9
NC
RXD
TXD
Non use
GND
Non use NC
Shorted
9876
53214
Signal Names for D-sub 9p Connector
English
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
24
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
MS0602S0
/