Alvarion BreezeMAX Si 4000 Installing

BreezeMAX Si 4000
Alvarion
Brand
Alvarion
Model
BreezeMAX Si 4000
Category
Networking
Type
Installing

Alvarion BreezeMAX Si 4000 is a compact, portable subscriber unit that delivers a wireless high-speed internet connection in various environments. With its plug-and-play operation, you can easily set it up within minutes and begin receiving broadband service. Enjoy a stable connection for your internet needs, whether for work, entertainment, or staying connected with family and friends.

Alvarion BreezeMAX Si 4000 is a compact, portable subscriber unit that delivers a wireless high-speed internet connection in various environments. With its plug-and-play operation, you can easily set it up within minutes and begin receiving broadband service. Enjoy a stable connection for your internet needs, whether for work, entertainment, or staying connected with family and friends.

Installing the Si 4000 Modem
P/N 215629 -1- February 2010
Installing the Si 4000 Modem
Congratulations on your purchase of the Si 4000 Modem, the compact, portable subscriber
unit that provides a wireless high-speed connection in almost any environment. With 'plug
and play' operation, configuration is simple and in a matter of minutes you can begin to
receive broadband service.
Before you begin, make sure you have the User name and password (provided by your ISP/
operator).
Package Content
See Figure 1
• Si 4000 Modem (1)
• AC power adapter (2)
• Data cable (1.5m) (3)
• This Quick Installation Guide
If any of the items are missing or damaged, contact your WiMAX service provider.
Figure 1: Package Contents
Power Adapter (2)
Data Cable (3)
Si 4000 Modem (1)
Installing the Si 4000 Modem
P/N 215629 -2- February 2010
Select a Location
The modem can be installed on any horizontal surface, such as a desktop or shelf. Be sure
to select a suitable location for the unit. Consider these points:
• Select a cool, dry place, which is out of direct sunlight.
• Leave adequate space (approximately 5cm /two inches) on all sides for proper air flow.
• Locate the unit near an AC power outlet that provides 100V to 240V.
• Avoid metal obstacles such as metal window frames or metal film anti-glare windows in
the transmission path.
• Position the unit at least 1 meter away from any WiFi device (if used), to avoid
interference.
• Position the unit away from electrical equipment, metal furniture, and moving metal
objects such as metal fans or doors.
CAUTION
To avoid damage to the product, use ONLY the power adapter supplied
with the unit.
Do not install the Si 4000 modem outdoors.
Installing the Si 4000 Modem
P/N 215629 -3- February 2010
Installation and Connection
1 Place the unit on a flat horizontal surface.
2 Connect the data cable to the modem’s data port ( ) (see Figure 2).
3 Connect the other end of the data cable to the network port of your PC/swtich.
4 Connect a standard (analog) telephone set to the modem’s telephone port ( )using a
standard telephone cable with RJ-11 connector (see
Figure 2).
5 Connect the power cable to the power adapter.
6 Connect the power adapter to the modem (see Figure 2).
7 Connect the power adapter to the wall outlet. Wait a few seconds for the modem to
initialize.
8 If a CDROM is supplied with your modem, insert it to the CDROM drive, run the CPE
Auto-configuration Tool executable, and follow the instructions in
“Installing the
WiMAX Modem Using the WiMAX Modem Application CD” on page 4
.
Figure 2: Si 4000 Modem Connections
Power socket
Data port
Reset button
Telephone port
Installing the Si 4000 Modem
P/N 215629 -4- February 2010
Installing the WiMAX Modem Using the WiMAX Modem
Application CD
1 From the CDROM supplied with the unit,
run the CPE Auto Configuration Tool:
CPEAutoConfigTool.exe; The Installation
Setup Wizard window is displayed.
2 Click
Next to continue; The Choose Your
ISP window is displayed.
3 Choose the ISP (Internet Service Provider)
ConfigFile from the list and click
Next.
The Ready To Install window is displayed.
Installing the Si 4000 Modem
P/N 215629 -5- February 2010
4 Click
Install. If your CPE is powered up,
click
OK for performing system reboot. If
not, power on the CPE and click
OK.
The tool starts the auto-configuration
process of the CPE settings. It will change
default settings by using the *.ipk file, and
then run “reset to factory default” by using
default configuration in the file.
5 When the installation is complete, an
Installation Success window is displayed.
Click
OK.
6 Click
Finish. The CPE is now configured
with the parameters from the ConfigFile.
Installing the Si 4000 Modem
P/N 215629 -6- February 2010
Troubleshooting
The lights on the modem indicate the strength of the signal received. The more lights
illuminate, the stronger the received signal. If the modem is not able to receive any signal,
choose another location for the unit.
Figure 3: WiMAX Modem LEDs
Table 1-1: LEDs Status Indications
LED Color Status Description
Power (1) ( ) Blue Off Power off
On Power on
Data (2) ( )
Green Off PC and modem are disconnected
On PC and modem are connected
Blinking Data transmission
Wi-Fi (3) ( ) OR
*
Unused
*. WiFi LED (3) is unused in units without integrated WiFi
Green On Integrated Wi-Fi enabled
Off Integrated Wi-Fi disabled
Link Status (4) Green On Modem is connected to the network
Off Modem is not connected to the
network
WiMAX Link Status (5-7) Green On Signal strength
Power LED (1)
Integrated WiFi / Unused* LED (3)
WiMAX Signal Strength LEDs (4-7)
Ethernet LED (2)
* WiFi LED (3) is unused in units without
integrated WiFi
Installing the Si 4000 Modem
P/N 215629 -7- February 2010
Specifications
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC and EN300385 Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
FCC Radiation Hazard Warning
To comply with FCC RF exposure requirements in Section 1.1307and 2.1091 of FCC Rules,
the antenna used for this transmitter must be kept at a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
Electronic Emission Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article 3 of the
R&TTE Directive 1999/5/EC.
Physical and electrical:
• Power Consumption: 12W maximum
• Power adapter: Input of
100 VAC - 240 VAC 50 Hz to 60 Hz
Environmental:
• Operating temperature: 0°C to 40°C
• Operating humidity: 5%-95%
Connectors:
• Ethernet: 10/100Base-T (RJ-45)
• VoIP: RJ-11 telephone port
• Standard DC power jack
Standard compliance:
2.5 GHz models:
• UL 60950-1
• IEC 60950-1
• FCC Part 15, 27
• ETSI EN 302 544
• ETSI EN 301 489
• ETSI EN 302 326
• ETSI 300 328
3.5 GHz models:
• ETSI EN 301 489
• ETSI EN 302 326
• ETSI 300 328
Installing the Si 4000 Modem
P/N 215629 -8- February 2010
Telephone Safety Precautions
When using your telephone equipment, the following basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury:
• Keep the telephone in a cool and dry place.
• Avoid using a telephone (unless it is a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
• Do not use the telephone to report gas leak in the vicinity of the leak.
• Use only the power cord and batteries indicated in the equipment manual. Do not
dispose of batteries in a fire as they may explode. Check with local codes for special
disposal instructions.
• To reduce the risk of fire, use only No. 26 AWG or larger (e.g. 24 AWG) UL Listed or
CSA Certified Telecommunication Line Cord.
• If units are to be shipped to original equipment manufacturers (OEM) for repackaging
with end-user product, only one operation/safety instruction manual may be provided
per shipment box with instructions to reproduce the instructions in the end-user User's
Manual.
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive electronic and electrical waste
must not be disposed of with unsorted waste. Please contact your
local recycling authority for disposal of this product.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Alvarion BreezeMAX Si 4000 Installing

BreezeMAX Si 4000
Alvarion
Brand
Alvarion
Model
BreezeMAX Si 4000
Category
Networking
Type
Installing

Alvarion BreezeMAX Si 4000 is a compact, portable subscriber unit that delivers a wireless high-speed internet connection in various environments. With its plug-and-play operation, you can easily set it up within minutes and begin receiving broadband service. Enjoy a stable connection for your internet needs, whether for work, entertainment, or staying connected with family and friends.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents