Alvarion 4M-CPE4000-Si-1D-1V-2.5 User manual

Alvarion
Brand
Alvarion
Model
4M-CPE4000-Si-1D-1V-2.5
Type
User manual

This manual is also suitable for

BreezeMAX Si 4000 Ver.2.0 GA Release Notes Page 1 of 4
4Motion
®
802.16e CPE
BreezeMAX Si 4000
Product Release 2.0 (01.02.67.999)
GA Release Note
April 20
11
© Alvarion Ltd. All rights reserved.
The material contained herein is proprietary, privileged, and confidential. No disclosure thereof shall be made
to third parties without the express written permission of Alvarion. Alvarion reserves the right to alter the
specifications in this publication without prior notice.
BreezeMAX Si 4000 Ver.2.0 GA Release Notes Page 2 of 4
1. Introduction
The CPEs that are released in this version include BreezeMAX Si 4000 series at 2.5G and 3.5G.
The BreezeMAX 4000 Si modem (CPE) is a WiMAX subscriber station designed to provide Internet access
for a home or small office. The unit includes one RJ-45 Ethernet port for LAN connection and one RJ-11
Voice over IP (VoIP) phone port. An 802.11b/g Wi-Fi module is included for providing a local WiFi access
point service. The CPE provides a web-based management interface for the configuration of all features.
The following models are available:
1. 4M-CPE4000-Si-1D-1V-2.5
• 725802EU
• 725802US
2. 4M-CPE4000-Si-1D-1V-WiFi-3.5
• 735242EU
3. 4M-CPE4000-Si-1D-1V-3.5
• 735241EU
4. 4M-CPE4000-Si-2D-2V-2.5 (“Premium” Model)
• 725804EU
BreezeMAX Si 4000 CPE
BreezeMAX Si 4000 CPE Premium Model
2. Feature Highlights
2.1. New Features - Release 2.0
1. IPCS Bridge Mode support
2. Ethernet CS/ VLAN CS support
3. Possibility to configure the WEB menu pages that will be available to the end-user
4. Operator web access using unique USERNAME and PASSWORD
5. Optimizing firewall rules to control TCP MSS
6. Default changed for the following parameters:
• Authentication password – quickynikynyoky
BreezeMAX Si 4000 Ver.2.0 GA Release Notes Page 3 of 4
• WiFi Country Code for EU P/N – ETSI
• WiFi Radio Channel for EU P/N – Automatic
• WEB Password – admin
7. New Beceem Release – Version 2.4.4 (5.2.7.4)
• FFR support
• Bug Fixes:
o After massive HO and traffic, the unit freezes in SCAN state .Reboot is required.
o CPE may freeze in different scenarios when Kannon is open.
o Unexpected WD Reset during stress test
o Tx Power raises in 3dB after missed RNG-RSP
o The CPE sends CQI with value 0 after unsuccessful HO exchanges
8. New Frequency band support: 3.3-3.4 GHz
9. New Indoor CPE - BreezMAX 4000 Si ”Premium” :
• Frequency: 2.5 GHz
• Services: 2 Data / 2 Voice / WiFi
• Two 7dBi Gain external Omni Antenna
2.2. From Release 1.0
• Designed for WiMAX 802.16e fixed and nomadic users
• Services: Data, Voice and Wi-Fi (3.5 GHz only)
• Frequency coverage: 2485-2690, 3400-3600 MHz
• 1 x Ethernet 10/100BT port
• 1 x FXS RJ-11 VoIP port
• WiFi 802.11b/g 54 Mbps (3.5 GHz only)
• High Tx power (27dbm)
• 2 Integrated directional antennas (`6dBi)
• Networking:
o NAT
o Multihost
o DHCP
o IPCS rules – DSCP marking/filtering
• Class-5 VoIP services
• WiMAX Chipset: Beceem BCS5200
• Remote management: web interface, TR069
BreezeMAX Si 4000 Ver.2.0 GA Release Notes Page 4 of 4
3. Versions
• SW: 01.02.68.999
• Configuration tool Ver. 2.6
• Star ACS version: 3.1.7 and 3.0.11
• 4Motion BTS Ver. 2.5M, 3.0 and 3.0M1
4. Known Issues
• WEB may become inaccessible during traffic. A notification is displayed to the user. When the
traffic stops, WEB access becomes available.
• The Service Line default rules in the Operator WEB GUI must remain in order to enable
registration to VoIP and TR-69.
• WiMAX Supplicant Root CA must be configured as enabled when EAP TLS is used.
• DTMF signaling is not supported for the Caller ID transmission.
• If the Registrar Address parameter is configured as an IP address, the SIP Domain Name (set
in the WEB) will be used in the “From” header of outgoing INVITE messages.
• ETH CS – the maximum ETH packet size supported is 1512 Bytes. Packet fragmentation is
not supported.
• CPE may stop responding to ACS requests if software download is interrupted. Reset is
required to recover the CPE.
• CPE restarts when accessing the WEB first time after changing operational mode. The CPE
will continue functioning as normal after the restart.
• The maximum number of neighbor BS supported is 32.
5. Documentation Introduced with the Release
• Version Release Notes (this document)
• User Manual
• Operator Manual
• Quick Installation Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Alvarion 4M-CPE4000-Si-1D-1V-2.5 User manual

Alvarion
Brand
Alvarion
Model
4M-CPE4000-Si-1D-1V-2.5
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents